V1.45 installed & big improvment (oil temp) - Page 2 - BMW 3-Series (E90 E92) Forum

bimmerlex · 05-15-2007, 10:58 PM

Quote:

Originally Posted by muvaside

Let me start off by saying , when I first got the procede v1.4 , the car was running strong but oil temps kept rising from 240-280 periodicaly . I've been running v1.45 with frequent WOT and 80+temps , my oil temp never goes pass by 250 . A big

to Shiv and their staff for their time and technology ! Keep up the good work guys , looking forward for the new maps !

I actually got my AA Xede installed yesterday by Terry335 (very nice and helpful guy BTW) and noticed the same cooler temp effect. I used to watch my temp all the time, and stock I used to have it 250-270 degrees all the time, now with Xede and heavy driving it doesn't go over 230.
So, it's not a placebo effect. Gas mileage got much worse though

jon@themshop · 05-15-2007, 11:03 PM

Quote:

Originally Posted by bimmerlex

I actually got my AA Xede installed yesterday by Terry335 (very nice and helpful guy BTW) and noticed the same cooler temp effect. I used to watch my temp all the time, and stock I used to have it 250-270 degrees all the time, now with Xede and heavy driving it doesn't go over 230.
So, it's not a placebo effect. Gas mileage got much worse though

Glad to hear your enjoying your AA Tuning Xede!

pikkashoe · 05-15-2007, 11:25 PM

bimmerlex, "you must control the force, young jedi". I get awesome gas mileage but the minute i use that boost, its downhill from there.

bimmerlex · 05-16-2007, 12:15 AM

Quote:

Originally Posted by jon@themshop

Glad to hear your enjoying your AA Tuning Xede!

Thanks for getting me one, Jon. It's an awesome unit.

bimmerlex · 05-16-2007, 12:17 AM

Quote:

Originally Posted by pikkashoe

bimmerlex, "you must control the force, young jedi". I get awesome gas mileage but the minute i use that boost, its downhill from there.

I know, but it's so tempting to step on the gas to just feel all that power. I hope I'll get used to it in a week or so and get back to my normal driving

pikkashoe · 05-16-2007, 09:24 AM

Silver state, using a laptop and a serial cable, you can update the PROCEDE to the newest version software which is 1.45 once it has been installed in your car. It makes a difference in driveability.

Just go here and download the loading software and the new 1.45 map.

http://www.vishnutuningforum.com/for...read.php?t=107

I dont think there is an 100 octane map, maybe SHIV will chime in.

pikkashoe · 05-16-2007, 08:00 PM

Well i had no improvement in oil temp as others have claimed.

Yet again I had no issue with oil temps before either. The power comes on even smoother now, and it appears my little surge at 4000 rpms is now gone. Thanks SHIV.

335lvr · 05-17-2007, 09:43 AM

Quote:

Originally Posted by pikkashoe

Well i had no improvement in oil temp as others have claimed.

Yet again I had no issue with oil temps before either. The power comes on even smoother now, and it appears my little surge at 4000 rpms is now gone. Thanks SHIV.

+1. Installed yesterday. 1.4 had a surge at 4100 rpm that lessened a little as the ECU adapted. v1.45 has all but eliminated it, very smooth power delivery.

pikkashoe · 05-17-2007, 10:08 AM

335lvr, good to hear. Mine is completly gone too. Now I can pull hard from 2000 rpms up to the new power which came with 1.45 which is around 6700 to 6800 rpms.

Now time for a new round of goodies, ultmate pedals and front aero spoiler. I need to stop spending money on this car!!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-15-2007, 11:25 PM	#25
pikkashoe Major Drives: 2007 BMW 335 Coupe Join Date: Feb 2007 Location: Miami, FL Posts: 1,239 iTrader: (1)	bimmerlex, "you must control the force, young jedi". I get awesome gas mileage but the minute i use that boost, its downhill from there.

05-16-2007, 09:24 AM	#28
pikkashoe Major Drives: 2007 BMW 335 Coupe Join Date: Feb 2007 Location: Miami, FL Posts: 1,239 iTrader: (1)	Silver state, using a laptop and a serial cable, you can update the PROCEDE to the newest version software which is 1.45 once it has been installed in your car. It makes a difference in driveability. Just go here and download the loading software and the new 1.45 map. http://www.vishnutuningforum.com/for...read.php?t=107 I dont think there is an 100 octane map, maybe SHIV will chime in.

05-16-2007, 08:00 PM	#29
pikkashoe Major Drives: 2007 BMW 335 Coupe Join Date: Feb 2007 Location: Miami, FL Posts: 1,239 iTrader: (1)	Well i had no improvement in oil temp as others have claimed. Yet again I had no issue with oil temps before either. The power comes on even smoother now, and it appears my little surge at 4000 rpms is now gone. Thanks SHIV.

05-17-2007, 10:08 AM	#31
pikkashoe Major Drives: 2007 BMW 335 Coupe Join Date: Feb 2007 Location: Miami, FL Posts: 1,239 iTrader: (1)	335lvr, good to hear. Mine is completly gone too. Now I can pull hard from 2000 rpms up to the new power which came with 1.45 which is around 6700 to 6800 rpms. Now time for a new round of goodies, ultmate pedals and front aero spoiler. I need to stop spending money on this car!!!