[bennettdavis]

I am looking for a DIY guide for the coolant outlet hose replacement. the top is easy to get to and attaches directly below the oil filter housing and has two bolts that attach the hose to the filter engine. the bottom seems to attach to the thermostat and is super hard to get to. I am looking for what would need to be taken apart to get to this connection on the bottom side.

thanks in advance if anyone has any advice or info on this..

http://www.ecstuning.com/ES25103/

[BashShah]

Literally look up n54 water pump and tstat DIY.
That is what is needed.
Because of there space issue..... I mention any other way.

Just curious, why are you replacing it?

DN

[D0Z3R335i]

Originally Posted by bennettdavis

I am looking for a DIY guide for the coolant outlet hose replacement. the top is easy to get to and attaches directly below the oil filter housing and has two bolts that attach the hose to the filter engine. the bottom seems to attach to the thermostat and is super hard to get to. I am looking for what would need to be taken apart to get to this connection on the bottom side.

thanks in advance if anyone has any advice or info on this..

http://www.ecstuning.com/ES25103/

yea its a bitch and a half, all ill say if follow the post above because you basically need to access the water pump, unbolt the sway bar so you have more room to work and MAKE SURE you get new clamps and get them in between those white has marks on the hose, otherwise leaks for days