Adjusting washer nozzle

MalM3 · 09-24-2011, 01:58 PM

I changed my washer nozzle out, and now the new one shoots at the completely wrong angle..

i cant see any adjustment possibilities on the old one.
has anyone else experienced this

mike3000fl · 09-25-2011, 08:47 AM

i want to say that i have seen a tool in catalogs that you insert into the nozzle and physically reposition it.

maybe try a pin or something on the old one and test, see if it screws up the spray pattern.

MalM3 · 09-26-2011, 12:48 PM

hello mate

thanks for the info, but its not the same for the newer type jets. there is no adjustment point

but i looked in BMW tis, and i can see they say they are set from the factory .. so i guess ill be sending this one back.

09-24-2011, 01:58 PM	#1
MalM3 4 pot warrior 37 Rep 1,307 Posts Drives: E90 318I Join Date: Apr 2009 Location: DENMARK iTrader: (1) Garage List 2006 e90 [10.00]	Adjusting washer nozzle I changed my washer nozzle out, and now the new one shoots at the completely wrong angle.. i cant see any adjustment possibilities on the old one. has anyone else experienced this __________________ Been there, done that, wanna do it again
	Appreciate 0 Tweet Quote

09-25-2011, 08:47 AM	#2
mike3000fl Banned 138 Rep 2,731 Posts Drives: 06 330i Join Date: Feb 2010 Location: Tampa iTrader: (0)	i want to say that i have seen a tool in catalogs that you insert into the nozzle and physically reposition it. maybe try a pin or something on the old one and test, see if it screws up the spray pattern.
	Appreciate 0 Quote

09-26-2011, 12:48 PM	#3
MalM3 4 pot warrior 37 Rep 1,307 Posts Drives: E90 318I Join Date: Apr 2009 Location: DENMARK iTrader: (1) Garage List 2006 e90 [10.00]	hello mate thanks for the info, but its not the same for the newer type jets. there is no adjustment point but i looked in BMW tis, and i can see they say they are set from the factory .. so i guess ill be sending this one back. __________________ Been there, done that, wanna do it again
	Appreciate 0 Quote