|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Business to CCC Professional Navigation Retrofit issue "NEED HELP"
|
|
05-21-2013, 01:25 AM | #1 |
Private
5
Rep 54
Posts |
Business to CCC Professional Navigation Retrofit issue "NEED HELP"
Hi Guys
I have retrofitted my Business to CCC Professional Navigation and now have an issue with the IDrive controller The scrolling control button doesn’t work; all other functions (press, left, right, up, down, menu) are working fine I have scanned the system and no fault codes were present Any help will be appreciated |
05-21-2013, 02:26 AM | #2 |
Jedi samurai ninja turtle
619
Rep 3,021
Posts
Drives: X3 M40i 2018
Join Date: May 2012
Location: Sydney, Australia
|
Did it require an element of coding?
|
Appreciate
0
|
05-21-2013, 03:40 AM | #3 | |
Captain
137
Rep 859
Posts |
Quote:
|
|
Appreciate
0
|
05-21-2013, 04:42 AM | #5 | |
Captain
137
Rep 859
Posts |
Quote:
|
|
Appreciate
0
|
05-21-2013, 04:49 AM | #6 | |
Private
5
Rep 54
Posts |
Quote:
Very good post No, I have not replaced the controller (I missed this point) I tried to do the coding but in my case it stuck on “measures plan” and wouldn’t come through How can I get the correct controller??? |
|
Appreciate
0
|
05-21-2013, 04:59 AM | #7 | |
Captain
137
Rep 859
Posts |
Quote:
You really need to follow the official retrofit guide, otherwise you will get problems. Plus if you brick a module when coding your stuffed. Hence you MUST follow the retrofit guide. |
|
Appreciate
0
|
05-21-2013, 05:01 AM | #8 | |
Private
5
Rep 54
Posts |
Quote:
|
|
Appreciate
0
|
05-21-2013, 05:13 AM | #9 |
Captain
137
Rep 859
Posts |
Type your VIN in to realoem and go to navigation > retrofit and then look up the EBA guide numbers. Then start searching the net for the guides or if you ask your dealer nicely they might give you a copy off the BMW ASAP web portal.
Do you have an proper copy of the BMW ETK parts program? In there you can search for the individual part components of a retrofit kit, this will give you the controller number you need. See my attachments in my retrofit thread as examples. Here is an example: http://www.realoem.com/bmw/showparts...49&hg=65&fg=95 Follow the guide and do it 100% as they say or you are just asking for troubles. The coding alone takes a couple of hours, so make sure you have a good constant power supply hooked up to your car and not a battery charger. If you lose voltage when coding, you'll brick the module(s). |
Appreciate
0
|
05-21-2013, 06:24 AM | #10 | |
Private
5
Rep 54
Posts |
Quote:
What is your cantroller part number (just in case)? |
|
Appreciate
0
|
05-21-2013, 03:27 PM | #11 |
Captain
137
Rep 859
Posts |
|
Appreciate
0
|
Bookmarks |
|
|