Need Help: Cant Pass Inspection

Sidewinderpb · 05-28-2015, 09:11 AM

Quote:

Originally Posted by Cure12

Any Updates?

+1

melloww22 · 05-29-2015, 12:56 AM

Fingers crossed

High hopes for a N55 DP Fix...

area74 · 05-29-2015, 09:58 PM

Hello everyone, just to update on the status

the first test results were not encouraging, I am still awaiting some data from this test to confirm.

we have not received any test results from the second unit....

we have also been made aware of an inferior voltage regulator (due to parts supplier)within the io2, this causes P0138, etc... fault codes.

we are currently fixing this hardware issue, however there is a field fix available. not all units are affected.

we are also currently tuning some software based on the first test unit, from what we know....we just need a little more data to tweak it.

thanks again to our testers

******

wgknestrick · 06-01-2015, 08:37 PM

Quote:

Originally Posted by ******

Hello everyone, just to update on the status

the first test results were not encouraging, I am still awaiting some data from this test to confirm.

we have not received any test results from the second unit....

we have also been made aware of an inferior voltage regulator (due to parts supplier)within the io2, this causes P0138, etc... fault codes.

we are currently fixing this hardware issue, however there is a field fix available. not all units are affected.

we are also currently tuning some software based on the first test unit, from what we know....we just need a little more data to tweak it.

thanks again to our testers

******

I just received mine in the mail. What do you advise? Send it back? Hold tight? install?

Bill

area74 · 06-07-2015, 05:50 AM

Hi all

sorry for the delay....I have not heard from the the second tester, and I am still awaiting some data from the first.

we have since made a hardware modification due to a internal voltage regulator issue, some vehicles have higher ac ripple which was causing an issue. mostly Chrysler products.

I have been away for about 2 weeks so just trying to catch up.

kevBquick · 06-14-2015, 10:42 AM

i need this in my life....i've been looking for options for forever. i need to pass emissions in July.

i was even keeping a code reader to watch when my cats hit readiness by my feet. which is actually shorter than you think. you just have to follow "the cycle".

melloww22 · 06-17-2015, 01:03 PM

guess it failed

area74 · 06-19-2015, 05:29 PM

we aren't done yet....two more possible testers with the equipment we need.

******

dghits26 · 06-21-2015, 07:49 AM

any update?

area74 · 06-27-2015, 05:42 AM

I have sent out a test unit, to another member. Canadapost is rather slow though.

Cure12 · 07-07-2015, 03:49 PM

Any updates?

area74 · 07-13-2015, 05:53 AM

Hi all

we started a new thread on this http://www.e90post.com/forums/showthread.php?t=1122568

******

PrematureApex · 01-27-2016, 12:54 PM

Wow...they deleted the other thread already?

Ridiculous.

Seamus · 01-27-2016, 05:24 PM

yeah they banned the guy who did more for the mod forum than probably anyone else since it started in that he fixed the issues with the cat + o2 for emissions on catless DP for n55.

geniuses

PrematureApex · 01-27-2016, 05:36 PM

For what? Not registering as a vendor? Generally, that warrants a warning before bringing down the hammer.

But anyway, literally thousands of people waiting for this product, and they ban him without saying a word, or at least leaving the thread open so people know it's out there.

PrematureApex · 01-27-2016, 06:49 PM

I mean, there had to be more to it. All of the other vendors/members didn't get banished for designing/making/selling o2 sims.

DoctoRx · 01-27-2016, 07:28 PM

Quote:

Originally Posted by PrematureApex

I mean, there had to be more to it. All of the other vendors/members didn't get banished for designing/making/selling o2 sims.

Most likely for offering a product and not being registered as a vendor. Crazy though, seeing as how the last post I read on there was the same company stating that they would reach out to the moderators in order to get registered as a vendor.

At any rate, the link for anyone needing to pick it up is here:

N55 DP Fix

PrematureApex · 01-27-2016, 07:53 PM

They block linking here too...

If people are looking for it...google ****** o2 simulator. Version 3.0

Also on amazon...

DoctoRx · 01-27-2016, 08:45 PM

Quote:

Originally Posted by PrematureApex

They block linking here too...

If people are looking for it...google ****** o2 simulator. Version 3.0

Also on amazon...

Sorry didn't realize this. Such a shame to see that after all the work they did on this, the mods would just ban them as soon as they say the product is ready for production. That's going to make people even less likely to want to work on these platforms.

Johnny Boost · 01-27-2016, 10:31 PM

I've seen other vendors get banned and unbanned. He just needs to go through the proper channels to become an official vendor and they will lift the ban.

kevBquick · 01-28-2016, 12:19 AM

Quote:

Originally Posted by DoctoRx

Most likely for offering a product and not being registered as a vendor.

exactly

Ozzie335i · 01-28-2016, 09:26 AM

This product will move by word of mouth.

05-29-2015, 12:56 AM	#68
melloww22 Captain 105 Rep 955 Posts Drives: 2011 335i E90 Join Date: Apr 2011 Location: San Diego iTrader: (1)	Fingers crossed High hopes for a N55 DP Fix...
	Appreciate 0 Quote

05-29-2015, 09:58 PM	#69
area74 Banned 9 Rep 23 Posts Drives: 4 door ? Join Date: Apr 2015 Location: Manitoba iTrader: (0)	Hello everyone, just to update on the status the first test results were not encouraging, I am still awaiting some data from this test to confirm. we have not received any test results from the second unit.... we have also been made aware of an inferior voltage regulator (due to parts supplier)within the io2, this causes P0138, etc... fault codes. we are currently fixing this hardware issue, however there is a field fix available. not all units are affected. we are also currently tuning some software based on the first test unit, from what we know....we just need a little more data to tweak it. thanks again to our testers ******
	Appreciate 0 Quote

06-07-2015, 05:50 AM	#71
area74 Banned 9 Rep 23 Posts Drives: 4 door ? Join Date: Apr 2015 Location: Manitoba iTrader: (0)	Hi all sorry for the delay....I have not heard from the the second tester, and I am still awaiting some data from the first. we have since made a hardware modification due to a internal voltage regulator issue, some vehicles have higher ac ripple which was causing an issue. mostly Chrysler products. I have been away for about 2 weeks so just trying to catch up.
	Appreciate 0 Quote

06-14-2015, 10:42 AM	#72
kevBquick Private First Class 40 Rep 156 Posts Drives: 2015 M3 Join Date: Dec 2013 Location: United States iTrader: (0)	i need this in my life....i've been looking for options for forever. i need to pass emissions in July. i was even keeping a code reader to watch when my cats hit readiness by my feet. which is actually shorter than you think. you just have to follow "the cycle". __________________ 2015 M3 MW 6MT - BM3 \| iND 2011 335xi MSport - Alpina shifted FBO on E85 - 388awhp/482awtq
	Appreciate 0 Quote

06-17-2015, 01:03 PM	#73
melloww22 Captain 105 Rep 955 Posts Drives: 2011 335i E90 Join Date: Apr 2011 Location: San Diego iTrader: (1)	guess it failed
	Appreciate 0 Quote

06-19-2015, 05:29 PM	#74
area74 Banned 9 Rep 23 Posts Drives: 4 door ? Join Date: Apr 2015 Location: Manitoba iTrader: (0)	we aren't done yet....two more possible testers with the equipment we need. ******
	Appreciate 0 Quote

06-21-2015, 07:49 AM	#75
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	any update?
	Appreciate 0 Quote

06-27-2015, 05:42 AM	#76
area74 Banned 9 Rep 23 Posts Drives: 4 door ? Join Date: Apr 2015 Location: Manitoba iTrader: (0)	I have sent out a test unit, to another member. Canadapost is rather slow though.
	Appreciate 0 Quote

07-07-2015, 03:49 PM	#77
Cure12 Second Lieutenant 29 Rep 236 Posts Drives: 2011 335 Join Date: Apr 2012 Location: New York iTrader: (3)	Any updates? __________________ ///Mods: ER CP, Helix FMIC, Dinan FFE, BMS N55 Intake, VRSF Catless DP, proTUNED...///
	Appreciate 0 Quote

07-13-2015, 05:53 AM	#78
area74 Banned 9 Rep 23 Posts Drives: 4 door ? Join Date: Apr 2015 Location: Manitoba iTrader: (0)	Hi all we started a new thread on this http://www.e90post.com/forums/showthread.php?t=1122568 ******
	Appreciate 0 Quote

01-27-2016, 12:54 PM	#79
PrematureApex Colonel 840 Rep 2,402 Posts Drives: N55 X1, N54 135, s54 m3 Join Date: Jan 2008 Location: Philadelphia iTrader: (0)	Wow...they deleted the other thread already? Ridiculous. __________________ '02 S54 M3 (500/500 GC/Koni) '08 N54 135 (JB4, DCI, BMW PS/Bilstein B6s, H&R M3 FSB, Strongflex FCABs) '14 N55 X1 (JB4, BMS DP, BMS Intake, Alpina TCU reflash, H&R Sports, Bilstein B6s, E93 M3 RSB, Strongflex FCABs, baby seat) '08 N54 535xi touring (Bilstein B6s, Downpipes, MHD tune, baby seat)
	Appreciate 0 Quote

01-27-2016, 05:24 PM	#80
Seamus Lieutenant 21 Rep 488 Posts Drives: E92 2011 335xi Join Date: Sep 2012 Location: salt lake city iTrader: (5) Garage List 2011 335xi [0.00]	yeah they banned the guy who did more for the mod forum than probably anyone else since it started in that he fixed the issues with the cat + o2 for emissions on catless DP for n55. geniuses __________________ 2011 E92 335xi, Cobb ProTune, Cobb FMIC, Catless DP, BMW Performance Exhaust, aFe stage 2 intake, BMS Chargepipe, Alpina B3 - BUT NOT ENOUGH POWER!
	Appreciate 0 Quote

01-27-2016, 05:36 PM	#81
PrematureApex Colonel 840 Rep 2,402 Posts Drives: N55 X1, N54 135, s54 m3 Join Date: Jan 2008 Location: Philadelphia iTrader: (0)	For what? Not registering as a vendor? Generally, that warrants a warning before bringing down the hammer. But anyway, literally thousands of people waiting for this product, and they ban him without saying a word, or at least leaving the thread open so people know it's out there. __________________ '02 S54 M3 (500/500 GC/Koni) '08 N54 135 (JB4, DCI, BMW PS/Bilstein B6s, H&R M3 FSB, Strongflex FCABs) '14 N55 X1 (JB4, BMS DP, BMS Intake, Alpina TCU reflash, H&R Sports, Bilstein B6s, E93 M3 RSB, Strongflex FCABs, baby seat) '08 N54 535xi touring (Bilstein B6s, Downpipes, MHD tune, baby seat) Last edited by PrematureApex; 01-28-2016 at 12:26 PM..
	Appreciate 0 Quote

01-27-2016, 06:49 PM	#82
PrematureApex Colonel 840 Rep 2,402 Posts Drives: N55 X1, N54 135, s54 m3 Join Date: Jan 2008 Location: Philadelphia iTrader: (0)	I mean, there had to be more to it. All of the other vendors/members didn't get banished for designing/making/selling o2 sims. __________________ '02 S54 M3 (500/500 GC/Koni) '08 N54 135 (JB4, DCI, BMW PS/Bilstein B6s, H&R M3 FSB, Strongflex FCABs) '14 N55 X1 (JB4, BMS DP, BMS Intake, Alpina TCU reflash, H&R Sports, Bilstein B6s, E93 M3 RSB, Strongflex FCABs, baby seat) '08 N54 535xi touring (Bilstein B6s, Downpipes, MHD tune, baby seat)
	Appreciate 0 Quote

01-27-2016, 07:53 PM	#84
PrematureApex Colonel 840 Rep 2,402 Posts Drives: N55 X1, N54 135, s54 m3 Join Date: Jan 2008 Location: Philadelphia iTrader: (0)	They block linking here too... If people are looking for it...google ****** o2 simulator. Version 3.0 Also on amazon... __________________ '02 S54 M3 (500/500 GC/Koni) '08 N54 135 (JB4, DCI, BMW PS/Bilstein B6s, H&R M3 FSB, Strongflex FCABs) '14 N55 X1 (JB4, BMS DP, BMS Intake, Alpina TCU reflash, H&R Sports, Bilstein B6s, E93 M3 RSB, Strongflex FCABs, baby seat) '08 N54 535xi touring (Bilstein B6s, Downpipes, MHD tune, baby seat)
	Appreciate 0 Quote

01-27-2016, 10:31 PM	#86
Johnny Boost Colonel 324 Rep 2,014 Posts Drives: '21 M850i GC Join Date: May 2013 Location: TBD iTrader: (0)	I've seen other vendors get banned and unbanned. He just needs to go through the proper channels to become an official vendor and they will lift the ban. __________________ WedgePerformance E40 MHD \| Performance Exhaust Mod \| BMS DP \| Vibrant 1790 \| BMS Intake \| VRSF CP \| xHP Stage 3 Michelin PSS \| M3 Control Arms LUX v4 LEDs \| Shadowline Grills \| Lip Spoiler
	Appreciate 0 Quote

01-28-2016, 09:26 AM	#88
Ozzie335i Lieutenant Colonel 659 Rep 1,525 Posts Drives: 2011 335i Join Date: Aug 2014 Location: DFW iTrader: (1)	This product will move by word of mouth.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search