[R0ut3r]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Selling Bavarian Soundwerks BSW set for logic 7 / Harman Kardon:

I bought these for my car but I ordered the wrong speakers.

Asking 500$

New in-box.

Will ship to US and Canada insured only.

[kmarei]

You know you can exchange them right?
I did the same thing and I exchanged the e90 ones for the e92 ones

[R0ut3r]

I am not exchanging I would need a credit.... I've sent a message to Halston at BSW ... we'll see what they say.

Cheers

[RevC]

would these work for non harman kardon (business prof) e92?

[R0ut3r]

Hmm... I don't think so.

You don't have that many speakers in the car!

[kmarei]

Originally Posted by R0ut3r

Hmm... I don't think so.

You don't have that many speakers in the car!

Well they will fit
But he'll have a few speakers he can sell on the forum

Depends if he's getting an ms8 the he needs 2 front, 2 rear, and center

[RevC]

im by no means a newb but when i got the car i got it without prem package but had the leather package upgrade and hifi stereo upgrade, sre not sure which system i have when i bought the car..i have a center speaker which is under a grill in the dash, two in the doors, and two which are covered by grilles on the sides of the passenger seat armrests?

i already have a few jl amps and a kenwood touchscreen, just need some speakers to set it up!! thanks for the help guys..

[R0ut3r]

Well, you need to keep in mind these are designed to work with the HiFi amp because they are running 2-Ohms and have crossovers that maximize the sound quality int that setup.

If you already have amps, you may want to look into some other speakers, with adjustable crossovers, which could get the best out of your setup.

Not that I don't want to sell my speakers but, get a pro like Technic or VPElectricity to advise you before you make the move.

[kmarei]

Originally Posted by R0ut3r

Well, you need to keep in mind these are designed to work with the HiFi amp because they are running 2-Ohms and have crossovers that maximize the sound quality int that setup.

If you already have amps, you may want to look into some other speakers, with adjustable crossovers, which could get the best out of your setup.

Not that I don't want to sell my speakers but, get a pro like Technic or VPElectricity to advise you before you make the move.

i thought you said they were for the logic 7 setup, which is what he has. HIFI does not have a center speaker

[R0ut3r]

HiFi in Canada is logic7, its confusing.

I know he has the right OEM system. But He also mentioned he had aftermarket amps to drive the speakers. If he is not using the OEM amp, are the BSW really the best choice, being 2 Ohm speakers with built in crossovers designed for the stock amp?

[cdgatti]

Originally Posted by R0ut3r

HiFi in Canada is logic7, its confusing.

I know he has the right OEM system. But He also mentioned he had aftermarket amps to drive the speakers. If he is not using the OEM amp, are the BSW really the best choice, being 2 Ohm speakers with built in crossovers designed for the stock amp?

This comment amuse makes me wonder, do we even know what the mid/tweeter crossover point is on the BSW speakers? I don't think it is published, has anyone tested?

[kmarei]

Originally Posted by cdgatti

This comment amuse makes me wonder, do we even know what the mid/tweeter crossover point is on the BSW speakers? I don't think it is published, has anyone tested?

Well there is no crossover
There is a cap on the tweeter limiting lower frequencies, but nothing on the mid

[kmarei]

Originally Posted by R0ut3r

HiFi in Canada is logic7, its confusing.

I know he has the right OEM system. But He also mentioned he had aftermarket amps to drive the speakers. If he is not using the OEM amp, are the BSW really the best choice, being 2 Ohm speakers with built in crossovers designed for the stock amp?

Well I can tell you I'm using the BSW speakers with an aftermarket amp
And they sound great
As per BSW, don't give them more than 50w , which is exactly what my amp puts out
And I high pass them around 80hz @24db
no issues after close to a year
Just make sure the aftermarket amp can handle a 2 ohm load

[RevC]

okay, i have an jl xd400/4, a mono 250/1, and a xd 600/6 from my previous install, would any of my amps work with the speakers or would it be more cost effective to look for something aftermarket? sre feel like im thread jacking but the help is appreciated Kmarei&rout3r.

[kmarei]

Originally Posted by RevC

okay, i have an jl xd400/4, a mono 250/1, and a xd 600/6 from my previous install, would any of my amps work with the speakers or would it be more cost effective to look for something aftermarket? sre feel like im thread jacking but the help is appreciated Kmarei&rout3r.

Those amps are garbage
I'll take them off your hands for $200


Both will work
But try to keep then gains very low, because 100w rms will probably blow the BSW spacers
They have stated in a thread here, that they should get 50w rms
The XDs put out about 100 into 2 ohm
So you can see where the issue is

I am high passing my BSW mids at 80hz at 24db, but I'm only giving them about 50w rms
I'd recommend a higher crossover point, since you are giving them 100 w rms


But if you do decide to sell the amps, let me know