[Herbert]

I have ISTA+/INPA/Tool32/WinKFP/NCSExpert all running great on my K-DCAN cable, but when I loaded ISTA P, I wasn't given the emulator option on the menu screen, just the automakers.

Once in ISTA P it wouldn't find the KDCAN cable, and only wanted ICOMs. The install also kicked the KDCAN cable out of all the other programs... Uninstalled EVERYTHING, then reinstalled all but the ISTA P.

Do I need to drop the ISTA P folder that was unzipped from ISTA-P.7z.001 directly to C:\, to one of the program folders in C:\, or none of the above (leave it where it is)?

Running Loader v6.6L.

Than you,
Herbert

[evominati]

"ISTA-P Loader v6.3 For ICOM and ISTA-P Loader v6.1 For D-CAN and E-NET Interface."
Click on the i symbol in upper right corner and check what it says.

[Herbert]

Loader V6.6L

[Herbert]

Anyone have link for Loader v6.1?

[Herbert]

Originally Posted by evominati

"ISTA-P Loader v6.3 For ICOM and ISTA-P Loader v6.1 For D-CAN and E-NET Interface."
Click on the i symbol in upper right corner and check what it says.

Thank you for pointing me in the right direction, found v6.1F.

[evominati]

Is it working now?

[Herbert]

Nope... But closer than I was before. Not sure what I am missing on the install that is giving me the "Unhandled" error.

[Herbert]

Ok, so uninstalled everything again, then reinstalled up to ISTA+. So one of the other issues, besides the "unhandled" error, is after I install ISTA-P and run the correct loader (v6.1F) to run K-DCAN it kills my K-DCAN connections to the other programs.

[Herbert]

Going to older version of ISTA/ISTA-P for use with ISTA-P and loader v6.1F. All loaded and running as it should!

[KevinE90]

Originally Posted by Herbert

Going to older version of ISTA/ISTA-P for use with ISTA-P and loader v6.1F. All loaded and running as it should!

Can I please have a link to download ista p and the loader for KDCAN CABLE