[E92Scott]

Hi all, I pick my E92 m sport up on Saturday and ever since I put the deposit down I can't help but think the exhaust tip on the 320's look a bit pathetic. Just wondered what others had done if anything? I don't want it to sound any different from standard just a nicer looking tip, eventually I may get a dual like on the 335 but I'm thinking for the time being.

[AdamC]

Just go to any custom exhaust place and they will be able to cut off your current and weld you on a new tip. Look for a Powerflow supplier or similar.

[magic77]

Where abouts are u located, Easiest is look for a powerflow fitting /agent they do some good options. Had mine done in reigate

[E92Scott]

Originally Posted by magic77

Where abouts are u located, Easiest is look for a powerflow fitting /agent they do some good options. Had mine done in reigate

You got a pic of yours mate, what did you go for?

[Hotcoupe]

Originally Posted by E92Scott

Hi all, I pick my E92 m sport up on Saturday and ever since I put the deposit down I can't help but think the exhaust tip on the 320's look a bit pathetic. Just wondered what others had done if anything? I don't want it to sound any different from standard just a nicer looking tip, eventually I may get a dual like on the 335 but I'm thinking for the time being.

http://www.e90post.com/forums/showpo...64&postcount=2

Originally Posted by magic77

Where abouts are u located, Easiest is look for a powerflow fitting /agent they do some good options. Had mine done in reigate

It was actually in Redhill, here:

http://www.tyrepros.co.uk/index.html

It was called RSR,but now changed hands,as far as I know they still do Powerflow exhausts,but worth a call first to double check.

Powerflow dealer locator:

http://www.powerflowexhausts.co.uk/dealer-locator/

[magic77]

Doh Raigate thats the one close enought started with R


On mine I ended up with a BCS back box being a 4pot wanted some extra sound as 4pot doesn't sound as good straight through as a 6 cyl.

So had them make a new midsection from cat/dpf to the back box basically a unrestricted pipe and then welded the back box up to it.

This was result



And how it looks



Overall very pleased with it sound wasnt the main reason mostly to get rid of oem tip as after 2 years it was horrid looking plus to free up flow in time for the extra bits