Dallas/Fort Worth dyno's

possible335i2008 · 08-19-2008, 10:34 PM

Anyone have some suggestions, I have heard of alamo performance, just going to get some runs in with my car and the afe and then do some runs after I get the Jb3 which should be in next week, anyone want to meet up and get some stock vs afe and maybe in two weeks jb3 335i vs jb3 335i with jb3

possible335i2008 · 08-23-2008, 08:12 AM

hey guys saw a couple of people checked this out maybe a couple of stock guys might want in on this, and some v3 guys may be down for this just to get a good comparision of the tunes, well either way let me know.

iamvietness · 08-23-2008, 07:32 PM

i know classic in plano has one but other than them i have no idea. let me know i may be down to go

possible335i2008 · 08-24-2008, 10:57 AM

cool just put my jb3 in, so we can get some good numbers, i am meeting up with kyle in houston to do some also pm ur number and we can see what the rates are

BMW_TT · 08-26-2008, 12:05 AM

Quote:

Originally Posted by possible335i2008

cool just put my jb3 in, so we can get some good numbers, i am meeting up with kyle in houston to do some also pm ur number and we can see what the rates are

My friend is a SA there so if you guys have a group, we might get a discounted rate. I might be about to get my friend to dyno her m3 (stock).

BMW_TT · 08-26-2008, 10:03 AM

sniper1690 has a dinan car. maybe he'll be interested and maybe some V3 cars.

iamvietness · 08-26-2008, 10:04 PM

awww everyone has modded cars except me. hahahhaha working on getting the jb3 though. debating about getting the pinout or waiting for the pnp version (i have no technical skills whatsoever!)

BMW_TT · 08-26-2008, 10:07 PM

Quote:

Originally Posted by iamvietness

awww everyone has modded cars except me. hahahhaha working on getting the jb3 though. debating about getting the pinout or waiting for the pnp version (i have no technical skills whatsoever!)

pin out shouldn't be bad at all. just takes some time. i have the pnp version. its good to have a base line dyno.

nespharym · 08-26-2008, 10:55 PM

If there is a group dyno day, please let me know

BMW_TT · 08-27-2008, 08:34 AM

I know we have more dfw cars than this.

iamvietness · 08-27-2008, 02:14 PM

Quote:

Originally Posted by BMW_TT

pin out shouldn't be bad at all. just takes some time. i have the pnp version. its good to have a base line dyno.

you know of anyone that could help me do the pin out version? never really gotten into the ecu area of my car. and it would be nice to have a watchful eye over my shoulders

possible335i2008 · 08-27-2008, 10:10 PM

yea we need to get a good group to do this dyno, maybe i can call alamo motorsports and see the rates, can I get a number of interested people

BMW_TT · 08-28-2008, 05:05 PM

Maybe you should start a post in the turbo thread. These regional threads are usually pretty dead. I know we have at least 8-10 people on this board from DFW.

possible335i2008 · 08-28-2008, 10:40 PM

good idea i may do this, it would be nice to get some dfw guys in the mix with some dyno's and the pin shouldn't be too hard, i installed the pnp version but the pin out didn't look to bad pm me and maybe i could help out

John4321 · 08-29-2008, 01:09 AM

I wouldn't recommend going to Alamo is you're talking about the one in Arlington. Brice the owner there is a nice guy, but some of his employees there aren't very careful strapping the cars down, they've damaged several that I know of. Also his dynojet is almost six foot up in the air and I don't know about anyone else, but it's pretty unnerving seeing my car up there like that. If something were to happen it would be a disaster, my car almost came off it once. I'd suggest Jotech in Garland, they have an in ground dyno and everyone there is very careful. I know the owner very well now and I'm sure we could get a good deal if we went as a group. If anyone is interested I'll give him a call to see what kind of group discounts he has. Let me know.

BMW_TT · 08-29-2008, 11:01 AM

Hey guys,

If you guys are seriously interested. Here's what I found to be very cheap.

http://www.ricekiller.com/forums/sho...light=dyno+day

Basically, $39 for 3 pulls on the dyno jet. Let me know who's all interested.

iamvietness · 08-29-2008, 11:33 AM

i'm in. whether it's in time for the jb3 to be installed or if i just stock i want to know either way. my work schedule is really jacked up though. so hopefully it'll work out.

Mack211 · 08-29-2008, 10:06 PM

I would be up for a bmw dyno day.

possible335i2008 · 08-31-2008, 12:26 AM

Quote:

Originally Posted by BMW_TT

Hey guys,

If you guys are seriously interested. Here's what I found to be very cheap.

http://www.ricekiller.com/forums/sho...light=dyno+day

Basically, $39 for 3 pulls on the dyno jet. Let me know who's all interested.

might be down for this, i have an appointment with alamo, but this sounds pretty nice also, might have to hit this up. I want to do it wed. morning so if anyone wants to meet me up that would be nice and my boss dynoed his supra and z06 there at alamo without any issues so we will see tt pm me and lets see if we can get this together and having an m3 would there would be nice dfw needs to represent here guys.

iamvietness · 08-31-2008, 09:10 AM

so when are you planning on doing this? i just ordered my jb3...would like to get baseline readings prior to install.

possible335i2008 · 08-31-2008, 09:47 PM

wednesday 10am that is what i have scheduled at alamo. Will be looking into the rice killers speacial and see what they have

iamvietness · 08-31-2008, 10:29 PM

it'll be a negative for me then. i work till 3pm on wednesday. have fun guys.

08-19-2008, 10:34 PM	#1
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	Dallas/Fort Worth dyno's Anyone have some suggestions, I have heard of alamo performance, just going to get some runs in with my car and the afe and then do some runs after I get the Jb3 which should be in next week, anyone want to meet up and get some stock vs afe and maybe in two weeks jb3 335i vs jb3 335i with jb3
	Appreciate 0 Tweet Quote

08-23-2008, 08:12 AM	#2
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	hey guys saw a couple of people checked this out maybe a couple of stock guys might want in on this, and some v3 guys may be down for this just to get a good comparision of the tunes, well either way let me know.
	Appreciate 0 Quote

08-23-2008, 07:32 PM	#3
iamvietness Colonel 239 Rep 2,174 Posts Drives: 2015 M3 Join Date: May 2008 Location: Plano, TX iTrader: (4)	i know classic in plano has one but other than them i have no idea. let me know i may be down to go
	Appreciate 0 Quote

08-24-2008, 10:57 AM	#4
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	cool just put my jb3 in, so we can get some good numbers, i am meeting up with kyle in houston to do some also pm ur number and we can see what the rates are
	Appreciate 0 Quote

08-26-2008, 10:03 AM	#6
BMW_TT Colonel 224 Rep 2,548 Posts Drives: E92 335i Join Date: Aug 2007 Location: Dallas, TX iTrader: (4)	sniper1690 has a dinan car. maybe he'll be interested and maybe some V3 cars.
	Appreciate 0 Quote

08-26-2008, 10:04 PM	#7
iamvietness Colonel 239 Rep 2,174 Posts Drives: 2015 M3 Join Date: May 2008 Location: Plano, TX iTrader: (4)	awww everyone has modded cars except me. hahahhaha working on getting the jb3 though. debating about getting the pinout or waiting for the pnp version (i have no technical skills whatsoever!)
	Appreciate 0 Quote

08-26-2008, 10:55 PM	#9
nespharym Captain 68 Rep 606 Posts Drives: SEMA 335i, Wide Body e46 Join Date: Sep 2007 Location: El Paso, Texas iTrader: (0)	INTERESTED If there is a group dyno day, please let me know
	Appreciate 0 Quote

08-27-2008, 08:34 AM	#10
BMW_TT Colonel 224 Rep 2,548 Posts Drives: E92 335i Join Date: Aug 2007 Location: Dallas, TX iTrader: (4)	I know we have more dfw cars than this.
	Appreciate 0 Quote

08-27-2008, 10:10 PM	#12
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	yea we need to get a good group to do this dyno, maybe i can call alamo motorsports and see the rates, can I get a number of interested people
	Appreciate 0 Quote

08-28-2008, 05:05 PM	#13
BMW_TT Colonel 224 Rep 2,548 Posts Drives: E92 335i Join Date: Aug 2007 Location: Dallas, TX iTrader: (4)	Maybe you should start a post in the turbo thread. These regional threads are usually pretty dead. I know we have at least 8-10 people on this board from DFW.
	Appreciate 0 Quote

08-28-2008, 10:40 PM	#14
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	good idea i may do this, it would be nice to get some dfw guys in the mix with some dyno's and the pin shouldn't be too hard, i installed the pnp version but the pin out didn't look to bad pm me and maybe i could help out
	Appreciate 0 Quote

08-29-2008, 01:09 AM	#15
John4321 New Member 3 Rep 22 Posts Drives: E92 335i, Ducati S4Rs Join Date: Aug 2008 Location: DFW iTrader: (0)	I wouldn't recommend going to Alamo is you're talking about the one in Arlington. Brice the owner there is a nice guy, but some of his employees there aren't very careful strapping the cars down, they've damaged several that I know of. Also his dynojet is almost six foot up in the air and I don't know about anyone else, but it's pretty unnerving seeing my car up there like that. If something were to happen it would be a disaster, my car almost came off it once. I'd suggest Jotech in Garland, they have an in ground dyno and everyone there is very careful. I know the owner very well now and I'm sure we could get a good deal if we went as a group. If anyone is interested I'll give him a call to see what kind of group discounts he has. Let me know.
	Appreciate 0 Quote

08-29-2008, 11:01 AM	#16
BMW_TT Colonel 224 Rep 2,548 Posts Drives: E92 335i Join Date: Aug 2007 Location: Dallas, TX iTrader: (4)	Hey guys, If you guys are seriously interested. Here's what I found to be very cheap. http://www.ricekiller.com/forums/sho...light=dyno+day Basically, $39 for 3 pulls on the dyno jet. Let me know who's all interested.
	Appreciate 0 Quote

08-29-2008, 11:33 AM	#17
iamvietness Colonel 239 Rep 2,174 Posts Drives: 2015 M3 Join Date: May 2008 Location: Plano, TX iTrader: (4)	i'm in. whether it's in time for the jb3 to be installed or if i just stock i want to know either way. my work schedule is really jacked up though. so hopefully it'll work out.
	Appreciate 0 Quote

08-29-2008, 10:06 PM	#18
Mack211 Lieutenant 23 Rep 497 Posts Drives: 2008 M3 - DCT Join Date: Sep 2007 Location: Fort Collins, CO iTrader: (0)	I would be up for a bmw dyno day. __________________ 2008 M3 Space Gray, Black, Syc Ant Wood Trim, DCT 2001 325ci Steel Gray - Sold
	Appreciate 0 Quote

08-31-2008, 09:10 AM	#20
iamvietness Colonel 239 Rep 2,174 Posts Drives: 2015 M3 Join Date: May 2008 Location: Plano, TX iTrader: (4)	so when are you planning on doing this? i just ordered my jb3...would like to get baseline readings prior to install.
	Appreciate 0 Quote

08-31-2008, 09:47 PM	#21
possible335i2008 Major 166 Rep 1,222 Posts Drives: 335i Join Date: Mar 2008 Location: united states iTrader: (10)	wednesday 10am that is what i have scheduled at alamo. Will be looking into the rice killers speacial and see what they have
	Appreciate 0 Quote

08-31-2008, 10:29 PM	#22
iamvietness Colonel 239 Rep 2,174 Posts Drives: 2015 M3 Join Date: May 2008 Location: Plano, TX iTrader: (4)	it'll be a negative for me then. i work till 3pm on wednesday. have fun guys.
	Appreciate 0 Quote