angel eyes not working

andrew722 · 04-22-2015, 05:54 PM

Hey guys , I just got my lux AE's and after installing them the passenger side didn't light up and on my dash had a warning light for day tine running lights/head light. I tried swapping the driver side to passenger side and vice versa they both work on the drivers side but neither work on the passenger. I then checked for voltage at the connector to find out there was 0v coming out of the connector which led me to believe maybe it was a fuse ? I started looking into the fuse panel to realize it looks like the whole headlight assembly is one fuse ? everything works other then the angel eyes on the passenger side. could this be something that needs coding re done ? and if so is there anyone in the newmarket or vaughan area that does this ? Thanks for any input.

Andrew

TheBingoBalls · 04-22-2015, 07:09 PM

Put the stock bulb back on and see if it lights up. Also check to see that you didn't accidentally mix up the - and +.

andrew722 · 04-22-2015, 08:40 PM

I don't happen to have the stock bulbs it came with dtec bulbs that were sort of blue that's why I changed to the lux , I've been told it might need to be re initialized with coding ? also I checked the positive negative thabks for the advice !

maxgohan · 04-23-2015, 11:33 AM

hmmmm put the dtecs back on then and see if they work....

andrew722 · 04-23-2015, 01:22 PM

Quote:

Originally Posted by maxgohan

hmmmm put the dtecs back on then and see if they work....

haha I tried this already , nothing seems to make a difference and no voltage out put to the connector has me thinking it's either a bad wire which seems weird or that the system may need to be reset

04-22-2015, 05:54 PM	#1
andrew722 New Member 2 Rep 21 Posts Drives: 2008 335xi coupe Join Date: Jun 2014 Location: ontario canada iTrader: (0)	angel eyes not working Hey guys , I just got my lux AE's and after installing them the passenger side didn't light up and on my dash had a warning light for day tine running lights/head light. I tried swapping the driver side to passenger side and vice versa they both work on the drivers side but neither work on the passenger. I then checked for voltage at the connector to find out there was 0v coming out of the connector which led me to believe maybe it was a fuse ? I started looking into the fuse panel to realize it looks like the whole headlight assembly is one fuse ? everything works other then the angel eyes on the passenger side. could this be something that needs coding re done ? and if so is there anyone in the newmarket or vaughan area that does this ? Thanks for any input. Andrew Last edited by andrew722; 04-22-2015 at 06:32 PM.. Reason: error
	Appreciate 0 Tweet

04-22-2015, 07:09 PM	#2
TheBingoBalls Brigadier General 3817 Rep 4,657 Posts Drives: BMW Join Date: Mar 2011 Location: Toronto, Ontario iTrader: (1) Garage List 2018 F36 BMW 440i x ... [0.00]	Put the stock bulb back on and see if it lights up. Also check to see that you didn't accidentally mix up the - and +.
	Appreciate 0

04-22-2015, 08:40 PM	#3
andrew722 New Member 2 Rep 21 Posts Drives: 2008 335xi coupe Join Date: Jun 2014 Location: ontario canada iTrader: (0)	I don't happen to have the stock bulbs it came with dtec bulbs that were sort of blue that's why I changed to the lux , I've been told it might need to be re initialized with coding ? also I checked the positive negative thabks for the advice !
	Appreciate 0

04-23-2015, 11:33 AM	#4
maxgohan Second Lieutenant 13 Rep 245 Posts Drives: pre-lci e90 335i Join Date: Sep 2014 Location: Toronto iTrader: (0)	hmmmm put the dtecs back on then and see if they work....
	Appreciate 0