[BeastMode335i]

Anybody know if these exist? I've seen some people make custom ones, but what about a site to go on and order?

[leonorag]

Ugh I've been looking for this myself. Can't seem to find any Non-M.

[Johnny Boost]

You have to get the M-tech lip if you have an e92. You can get them off of Ebay.

[BeastMode335i]

I saw the lip, but wasn't sure if that was my only option?!

[1chanc3]

Originally Posted by Johnny Boost

You have to get the M-tech lip if you have an e92. You can get them off of Ebay.

Not to be rude, but it's NOT called a m-tech lip... it's called aerodynamics lip or aero lip or aerodynamics front trim.
There's NO such thing as a m-tech lip and I'm not sure why so many people throw that word around, especially ebay and amazon sellers. M-tech was a word used in the older models of BMW before e9x.


OP, there are many options. Aero lip is one. Another one is to completely change out the bumper to m3 rep or m-sport. Or you can do what I did and just do a CF Hamann lip. Slightly aggressive but not overdone. I've already received tons of compliments at gas stations and what not.
Here's my review and pictures: http://www.e90post.com/forums/showthread.php?t=1100407

[BeastMode335i]

Originally Posted by 1chanc3

Not to be rude, but it's NOT called a m-tech lip... it's called aerodynamics lip or aero lip or aerodynamics front trim.
There's NO such thing as a m-tech lip and I'm not sure why so many people throw that word around, especially ebay and amazon sellers. M-tech was a word used in the older models of BMW before e9x.


OP, there are many options. Aero lip is one. Another one is to completely change out the bumper to m3 rep or m-sport. Or you can do what I did and just do a CF Hamann lip. Slightly aggressive but not overdone. I've already received tons of compliments at gas stations and what not.
Here's my review and pictures: http://www.e90post.com/forums/showthread.php?t=1100407

Thanks for the tip brother! That lip is bad ass! I like it because it's diff than the aero lip, but still has an aggressive look.. Does you scrape a lot, and are you lowered? Thanks man!

[Johnny Boost]

Originally Posted by 1chanc3

Not to be rude, but it's NOT called a m-tech lip... it's called aerodynamics lip or aero lip or aerodynamics front trim.
There's NO such thing as a m-tech lip and I'm not sure why so many people throw that word around, especially ebay and amazon sellers. M-tech was a word used in the older models of BMW before e9x.


OP, there are many options. Aero lip is one. Another one is to completely change out the bumper to m3 rep or m-sport. Or you can do what I did and just do a CF Hamann lip. Slightly aggressive but not overdone. I've already received tons of compliments at gas stations and what not.
Here's my review and pictures: http://www.e90post.com/forums/showthread.php?t=1100407

Actually it IS called an M-tech lip by many vendors and websites including e90post. If that's not the *official* name then who really cares? I called it an m-tech lip and you knew exactly what I was talking about.

[Asianoak]

There are options for Splitters for the non mech bumper as well. Hartge reps basically. I got a set from Bimmian, which I believe somebody is selling a set in the classifieds right now. There are eBay options as well that you can have painted that aren't as aggressive as the hartge reps but since I hadn't seen any reviews I stayed away.

The set I got from Bimmian had a great finish and fit well except for the front center where they meet the bumper... The curves don't line up quite right. I either got sent the wrong set which is totally possible or they are made this way on purpose in order to fit the aero lip. I read a random post about some of them being able to fit the standard bumper or the aero lip. Bimmian hasn't written back to answer my question so can't confirm one way or the other.

[1chanc3]

Originally Posted by Johnny Boost

Actually it IS called an M-tech lip by many vendors and websites including e90post. If that's not the *official* name then who really cares? I called it an m-tech lip and you knew exactly what I was talking about.

Only because I had to look it up lol. There is something called google (and it was a difficult find since everyone uses the proper name AERO LIP)...

Go look on getbmwparts (aka tischer bmw, or any bmw dealership or official website)

Oh wait... what do all these sites say?

http://www.jgmods.com/index.php/bmw/...e92-e93-1.html

http://www.getbmwparts.com/partlocat...catalogid=4462

https://www.e92-lighting.com/bmw-acc...ero-front-lip/

You can thank me later...

[1chanc3]

Originally Posted by BeastMode335i

Thanks for the tip brother! That lip is bad ass! I like it because it's diff than the aero lip, but still has an aggressive look.. Does you scrape a lot, and are you lowered? Thanks man!

I decided to go the uncommon route as too many people have the aero lip and a lot of people think the aero lip looks too stock, at least that's what people thought when I had it on lol. I wanted a more pronounced aftermarket feel but not overly done. The lip is 1.5 inches thick (meaning it will lower the front by 1.5 inches)

I am on stock sports suspension that came with the e92. I've only had it on for about a week so not much driving time but I am usually pretty careful around speed bumps, small and large, even when I had my old aero lip. I usually go at an angle, so no I haven't scraped yet.

[BeastMode335i]

I like those Hartge splitters!

And yeah I am planning on being a bit different than most which is why I chose to not go the aero lip route.. But thanks for all the great info!

[Asianoak]

The hartge splitters look great in my opinion and like someone else said the aero lip is so common it's almost as if it came on all coupes from the factory these says, I see more with it than without.

[Johnny Boost]

Originally Posted by 1chanc3

Only because I had to look it up lol. There is something called google (and it was a difficult find since everyone uses the proper name AERO LIP)...

Go look on getbmwparts (aka tischer bmw, or any bmw dealership or official website)

Oh wait... what do all these sites say?

http://www.jgmods.com/index.php/bmw/...e92-e93-1.html

http://www.getbmwparts.com/partlocat...catalogid=4462

https://www.e92-lighting.com/bmw-acc...ero-front-lip/

You can thank me later...

No need to thank you. I did a quick google search as well...

http://www.amazon.com/Urethane-07-09.../dp/B006FR2JWY

http://dtmfiberwerkz.com/access/tech...ter-p-574.html

http://www.absdynamics.com/e92-2d-m3...20708_1397.php

http://www.ebay.com/itm/NEW-OE-M-TEC...-/360884620036

[Andre335i]

I have this on my car. Looks really good.

http://www.ecstuning.com/BMW-E93-335...ody/ES1895235/

[1chanc3]

Originally Posted by Johnny Boost

No need to thank you. I did a quick google search as well...

http://www.amazon.com/Urethane-07-09.../dp/B006FR2JWY

http://dtmfiberwerkz.com/access/tech...ter-p-574.html

http://www.absdynamics.com/e92-2d-m3...20708_1397.php

http://www.ebay.com/itm/NEW-OE-M-TEC...-/360884620036

Like I said earlier, no clue where these no-name ebay/amazon sellers got the m-tech lip name from but they (and you) are very wrong. So stop using it because 1.) you will confuse other people on the forums, and 2.) make your self look noobish in the process since everyone else uses the correct term.

Do what you want though. I'm just trying to help you out but if you want to be stubborn then thats ok too.

[BeastMode335i]

Those Hartge splitters on that M3 bumper look so sick tho haha..!