Glimpse of what MSD80 is capable of

vasillalov · 03-01-2012, 09:02 PM

I forgot I took these screen shots last weekend when I was testing my MSD80 translation. I rediscovered them today so I decided to share:

1. MSD80 is capable to make per cylinder adaptations based on rough running:

2. MSD80 Injector adaptation values based on rough running detection:

3. Injector duty cycle:

Number 3 above can hint about possible limitations on the fueling system. If the injectors reach max duty cycle or their time window, you know you won't be able to squirt more fuel in the combustion chamber without other modifications

I'll add more screenshots as I finish translating everything. Clearly, I've missed some sections.

Rotorocious · 03-01-2012, 09:24 PM

Very cool. I used to poke around those menus and run some quick translations. Can't wait for the translations, very fun to search around in those menus

themyst · 03-01-2012, 09:26 PM

Are you going to freeware that INPA translation when you're done with it? I might have to bite the bullet and get the cable if you do!

kabalm18 · 03-01-2012, 09:28 PM

Very good! But you are waisting you time here. Post at s t I c k y s forum

ATP · 03-01-2012, 09:51 PM

Quote:

Originally Posted by kabalm18

Very good! But you are waisting you time here. Post at s t I c k y s forum

Go take a look.

vasillalov · 03-01-2012, 09:56 PM

Quote:

Originally Posted by themyst

Are you going to freeware that INPA translation when you're done with it? I might have to bite the bullet and get the cable if you do!

Absolutely yes! Why would I be posting teasers like this if I did not intend to make this translation publicly available?!

themyst · 03-01-2012, 09:59 PM

Quote:

Originally Posted by vasillalov

Absolutely yes! Why would I be posting teasers like this if I did not intend to make this translation publicly available?!

I wish I knew German

The only word I know is NEIN

jpsimon · 03-01-2012, 10:00 PM

du hast mich

sear · 03-01-2012, 10:06 PM

Quote:

Originally Posted by jpsimon

du hast mich

Lol

Btw, what's a proceed Rev 2.75? Noticed this in your sig.

jpsimon · 03-01-2012, 10:11 PM

procede rev 2.5 + bms speed delimiter. you need a rev 3 for both pwm + speed delimiter support. rev 2.5 needs that extra i/o for the pwm input so the extra hardware gets me all the way there

sear · 03-01-2012, 10:26 PM

Quote:

Originally Posted by jpsimon

procede rev 2.5 + bms speed delimiter. you need a rev 3 for both pwm + speed delimiter support. rev 2.5 needs that extra i/o for the pwm input so the extra hardware gets me all the way there

Cool, I thought that configuration was Rev 2.5B.

03-01-2012, 09:02 PM	#1
vasillalov Mad Linux Guru On The Loose 1121 Rep 5,396 Posts Drives: 2008 335i Sedan, 2023 M3 Join Date: Aug 2009 Location: Chicago, IL iTrader: (5) Garage List 2023 BMW M3 [0.00] 2008 335i E90 [8.00]	Glimpse of what MSD80 is capable of I forgot I took these screen shots last weekend when I was testing my MSD80 translation. I rediscovered them today so I decided to share: 1. MSD80 is capable to make per cylinder adaptations based on rough running: 2. MSD80 Injector adaptation values based on rough running detection: 3. Injector duty cycle: Number 3 above can hint about possible limitations on the fueling system. If the injectors reach max duty cycle or their time window, you know you won't be able to squirt more fuel in the combustion chamber without other modifications I'll add more screenshots as I finish translating everything. Clearly, I've missed some sections. __________________ 6MT \| COBB \| AR \| AE \| Forge DV \| HPF \| P3 Gauge \| Hybrid Intake \| O.S.Giken TCD \| All M3 bits \| TCKLine \| StopTech \| UUC \| ER \| SPEC
	Appreciate 0 Tweet Quote

03-01-2012, 09:24 PM	#2
Rotorocious Lieutenant Colonel 103 Rep 1,520 Posts Drives: 335xi Join Date: May 2010 Location: Colorado iTrader: (3)	Very cool. I used to poke around those menus and run some quick translations. Can't wait for the translations, very fun to search around in those menus
	Appreciate 0 Quote

03-01-2012, 09:26 PM	#3
themyst Major General 177 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	Are you going to freeware that INPA translation when you're done with it? I might have to bite the bullet and get the cable if you do! __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

03-01-2012, 09:28 PM	#4
kabalm18 My car drones and I LOVE IT!!! 194 Rep 613 Posts Drives: 1M & F10 535xi Join Date: May 2008 Location: My House iTrader: (0)	Very good! But you are waisting you time here. Post at s t I c k y s forum
	Appreciate 0 Quote

03-01-2012, 10:00 PM	#8
jpsimon Team Zissou 3065 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	du hast mich
	Appreciate 0 Quote

03-01-2012, 10:11 PM	#10
jpsimon Team Zissou 3065 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	procede rev 2.5 + bms speed delimiter. you need a rev 3 for both pwm + speed delimiter support. rev 2.5 needs that extra i/o for the pwm input so the extra hardware gets me all the way there
	Appreciate 0 Quote