ok as some of you already know im working on custom headlights but ive ran into a problem here. I retrofitted my projectors and added led halos. But the halos wont come on and i noticed the connector plugs are different on the lights im thinking it might be an error on these garbage aftermarket headlights. Ive hooked up the other headlight that i havent started on yet and hooked up one of my halos to the plug the same way the driver side is hooked up and it flickered a bit but then lit and stayed lit for a bit. I had bulb error which is fine but im wondering why the driver side wouldnt light at all and gave me a different bulb error than the passenger. Here is a picture of the wiring plugs for the lights.