[roppcaps]

What Is Best Setup For Hifi System Using Jehnert Door Boards For
Bmw X5 E70, Which Dsp/amplifier Will Be Best For Same

[ctuna]

The Helix 6 dsp has great specs.
You should ask 6 speed coupe since he sell and installs
those and the Jehnert doorboards.

110 watts per channel vs the 55 on the 82 dsp.

[roppcaps]

Originally Posted by Technic

I installed so far (2) PP82DSP in F30 HiFi... unplug OEM amp, plug PP82DSP.

100% PnP.

need wiring harness for plug in PP82DSP instead of standard HIFI amplifier

[mathematics]

Originally Posted by roppcaps

need wiring harness for plug in PP82DSP instead of standard HIFI amplifier

It comes with a regular harness. What are you talking about?

[roppcaps]

Originally Posted by mathematics

It comes with a regular harness. What are you talking about?

SIR, I WANT WIRING HARNESS TO CHANGE STANDARD HIFI AMPLIFIER WITH PP82DSP MATCH AMPLIFIER

[mathematics]

Originally Posted by roppcaps

SIR, I WANT WIRING HARNESS TO CHANGE STANDARD HIFI AMPLIFIER WITH PP82DSP MATCH AMPLIFIER

SIR, that's not what your broken English post said. You appear silly catching an attitude when you don't speak the language.

[roppcaps]

can you give TUNE for same

[KhalilD]

So, for a base audio upgrade, all I need is the pp82dsp and the PP-AC13A?

[6spdcoupe]

Originally Posted by KhalilD

So, for a base audio upgrade, all I need is the pp82dsp and the PP-AC13A?

Correct.

[mjn77]

Using the PP82DSP with the PP-AC13A with the base audio, is it recommended that the idrive headunit coded to hifi for the output signal?

[KhalilD]

How are you guys wiring the dsp? I'm looking at the harness from match and it seems a little short.

-edit- You have to get the 5 meter cable for it to work

[Herakles]

Bump for a e90 hifi owner looking for a place to start

Sounds like Helix/Match DSP/Amp with technic harness ? But how does the tuning work? I wouldn't know how to do this ?

[ctuna]

The bimmertech setup comes with a harness and tune.
It will be much better with an aftermarket speaker set for
the front . They have tunes for some of the common
aftermarket speaker sets.

It would be good to learn how to do your own adjustments
to it though.

[BMW3DK]

Awakening an old tread, but do you consider the balanced outputs to be a problem?

thx
// Chris

Originally Posted by Technic

HiFi = balanced outputs

[ctuna]

Balanced outputs from the Head Unit( idrive or pro radio.)
Technic is no longer a member of this board .
He has a website where he sells Harnesse and other aftermarket
stereo support hardware called Technicpnp.com

[OveN]

Originally Posted by BMW3DK

Awakening an old tread, but do you consider the balanced outputs to be a problem?

thx
// Chris

Quite the opposite, balanced differential signaling is more resistant to electromagnetic noise.

[BMW3DK]

Hei,

Og Takk - I'm aware of the general benefits.

Never the less it is important that the amplifier used works with a floating ground on the input stage. Some amplifiers has the input stage is running with negative = ground and does not work with balanced signals = trouble for the headunit, so be carefull before you connect them in a BMW...

:-)

Originally Posted by OveN

Quite the opposite, balanced differential signaling is more resistant to electromagnetic noise.

[Kalium]

Hello! I have an E90 with the 676 hifi system and I'm thinking of buying a Match PP82DSP unit. I got a good price from Fanatic Audio in Finland, €550 shipped to Sweden. However, I'm unsure what more I will need to use it in my car.

This is what it looks like in my car

[martinm0]

Originally Posted by Kalium

Hello! I have an E90 with the 676 hifi system and I'm thinking of buying a Match PP82DSP unit. I got a good price from Fanatic Audio in Finland, €550 shipped to Sweden. However, I'm unsure what more I will need to use it in my car.

I believe you just need a harness adapter to connect the current hardness to the DSP. I have the Bimmer-Tech version which comes with the harness.

Unsure about overseas sellers, but Technic PNP makes the harnesses in the states.

http://technicpnp.com/product-catego...-3-series-e9x/

[Kalium]

Originally Posted by martinm0

I believe you just need a harness adapter to connect the current hardness to the DSP. I have the Bimmer-Tech version which comes with the harness.

Unsure about overseas sellers, but Technic PNP makes the harnesses in the states.

http://technicpnp.com/product-catego...-3-series-e9x/

Is there no less DIY option? Something just plug and play?

[BMW3DK]

Tjena,

I'm in sweden as well..

Where are you located?

Send me a PB, then we can play & plug....

// Chris
(Malmö)

Originally Posted by Kalium

Is there no less DIY option? Something just plug and play?

[Kalium]

Originally Posted by BMW3DK

Tjena,

I'm in sweden as well..

Where are you located?

Send me a PB, then we can play & plug....

// Chris
(Malmö)

Thank you, I'm located in Sundsvall. I'm picking up a used Mosconi D2 100.4 today and Tonny at Ljudbyggaren.se is helping me with the rest (going with a Gladen 201 kit).