FRM Short Circuit Error, Angel Eyes no longer working, reset counter still nothing

bsmoov · 01-22-2018, 10:47 AM

So I have these two errors when I diagnose my car:

009CBB (FRM short circuit fault 2)
009CBC (FRM short circuit fault 1)

I've had a couple people attempt to remote code my car to clear the errors/reset counter to no avail.

How do I get rid of these stored codes or have anyone experienced the same?

My angel eyes no longer work I believe due to these codes. Bulbs are ok and were working previously (halogen h8 GP Thunder bulbs). The other reason I know they work is because the angel eyes turn on at startup, then after about 10 seconds or so, they shut off.

Sensible_ · 01-23-2018, 10:12 PM

Quote:

Originally Posted by bsmoov

So I have these two errors when I diagnose my car:

009CBB (FRM short circuit fault 2)
009CBC (FRM short circuit fault 1)

I've had a couple people attempt to remote code my car to clear the errors/reset counter to no avail.

How do I get rid of these stored codes or have anyone experienced the same?

My angel eyes no longer work I believe due to these codes. Bulbs are ok and were working previously (halogen h8 GP Thunder bulbs). The other reason I know they work is because the angel eyes turn on at startup, then after about 10 seconds or so, they shut off.

Strange.

What FRM do you have? 1, 2 or 3?

Run the job: status_lampen_kurzschluss_counter

In tool32 and see which lamps have a counter NOT equal to zero.

Post results here.

bsmoov · 01-24-2018, 12:31 PM

Not sure, most likely FRM 1 as it is a 2007 e91 with adaptive xenon.

Is there any chance we can collaborate and you can try remotely? I have all the stuff, I just don't know how to code.

Sensible_ · 01-24-2018, 03:48 PM

Quote:

Originally Posted by bsmoov

Not sure, most likely FRM 1 as it is a 2007 e91 with adaptive xenon.

Is there any chance we can collaborate and you can try remotely? I have all the stuff, I just don't know how to code.

Sure. I'll PM you.

GxTwo · 02-19-2018, 05:13 AM

I'm getting this error as well on my drivers side.

What do i need to reset it?

Sensible_ · 02-19-2018, 06:01 AM

Tool32

GxTwo · 02-19-2018, 08:17 AM

is this part of the standard tools? I've been looking at getting them installed but it all seems a bit daunting

Sensible_ · 02-19-2018, 10:35 AM

Quote:

Originally Posted by GxTwo

is this part of the standard tools? I've been looking at getting them installed but it all seems a bit daunting

Correct. It's not difficult though.

The easiest way is if you download standard tools from:

https://www.bimmergeeks.net/downloads

Then download the sp-datens package and unzip to a folder somewhere.

Then use BMW CODING TOOL, to import the sp-date ns into the standard tools.

Install your cable and that's it.

GxTwo · 02-20-2018, 03:49 AM

Quote:

Originally Posted by Sensible_

Correct. It's not difficult though.

The easiest way is if you download standard tools from:

https://www.bimmergeeks.net/downloads

Then download the sp-datens package and unzip to a folder somewhere.

Then use BMW CODING TOOL, to import the sp-date ns into the standard tools.

Install your cable and that's it.

Thanks, Sensible!

Do i need to download all the SP-datens? there's quite a lot of data there

Sensible_ · 02-20-2018, 03:51 AM

Quote:

Originally Posted by GxTwo

Quote:

Originally Posted by Sensible_

Correct. It's not difficult though.

The easiest way is if you download standard tools from:

https://www.bimmergeeks.net/downloads

Then download the sp-datens package and unzip to a folder somewhere.

Then use BMW CODING TOOL, to import the sp-date ns into the standard tools.

Install your cable and that's it.

Thanks, Sensible!

Do i need to download all the SP-datens? there's quite a lot of data there

You need to download the E89 package. E89 daten files are for the E9X chassis.

CircularMotion · 01-14-2019, 10:03 AM

in 4 later

01-22-2018, 10:47 AM	#1
bsmoov Captain 217 Rep 642 Posts Drives: e91 6 speed touring Join Date: Apr 2015 Location: Southern California iTrader: (0)	FRM Short Circuit Error, Angel Eyes no longer working, reset counter still nothing So I have these two errors when I diagnose my car: 009CBB (FRM short circuit fault 2) 009CBC (FRM short circuit fault 1) I've had a couple people attempt to remote code my car to clear the errors/reset counter to no avail. How do I get rid of these stored codes or have anyone experienced the same? My angel eyes no longer work I believe due to these codes. Bulbs are ok and were working previously (halogen h8 GP Thunder bulbs). The other reason I know they work is because the angel eyes turn on at startup, then after about 10 seconds or so, they shut off.
	Appreciate 0 Tweet Quote

01-24-2018, 12:31 PM	#3
bsmoov Captain 217 Rep 642 Posts Drives: e91 6 speed touring Join Date: Apr 2015 Location: Southern California iTrader: (0)	Not sure, most likely FRM 1 as it is a 2007 e91 with adaptive xenon. Is there any chance we can collaborate and you can try remotely? I have all the stuff, I just don't know how to code.
	Appreciate 0 Quote

02-19-2018, 05:13 AM	#5
GxTwo Enlisted Member 4 Rep 45 Posts Drives: 08 e93 335i Join Date: May 2017 Location: UK iTrader: (0)	I'm getting this error as well on my drivers side. What do i need to reset it?
	Appreciate 0 Quote

02-19-2018, 06:01 AM	#6
Sensible_ Colonel 529 Rep 2,504 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	Tool32
	Appreciate 0 Quote

02-19-2018, 08:17 AM	#7
GxTwo Enlisted Member 4 Rep 45 Posts Drives: 08 e93 335i Join Date: May 2017 Location: UK iTrader: (0)	is this part of the standard tools? I've been looking at getting them installed but it all seems a bit daunting
	Appreciate 0 Quote

01-14-2019, 10:03 AM	#11
CircularMotion First Lieutenant 13 Rep 323 Posts Drives: New to the e90! Join Date: Mar 2008 Location: Palm Beach, FL iTrader: (1)	in 4 later __________________ Getting back to my roots!
	Appreciate 0 Quote