[Hussnainh8]

Hi guys

My car came with this setup (no idea the brand etc other than the dual ram air cones) and I would like to install a blow off valve but I'm not sure how to go about it. What would I need to setup a blow off valve system?

See attachment for my current setup. Thank you.

[Hussnainh8]

Above is a picture with red circle where I assume a blow off valve would fit into but then whivh valve do I buy that will go straight into that port? And also what to do with the other 2 outlets. Anyone can help would greatly appreciate it.

[oVeRdOsE.]

looks like a VSRF charge pipe.

Red circle is a injection port, for like a water/meth kit.

you have few choices.

- get a charge pipe with a single 50mm fitting for a standard BOV.
- use a adapter 25mm to 50mm and cap 1 of the 2 25mm diverter valve hole
- use a 25mm BOV and cap the other hole.
- use 2x 25mm BOV. ( https://www.e90post.com/forums/showthread.php?t=1777121 )
- use upgraded diverters.(imo the best option if you don't want to mess with tunes, issues, etc)

[Serf27]

https://www.vr-speed.com/vrsf-charge...xoC1CkQAvD_BwE


https://www.ebay.com/itm/37446099986...mis&media=COPY

https://www.ebay.com/itm/20400915892...mis&media=COPY

https://www.ebay.com/itm/30477505278...mis&media=COPY