spacer question. 19x10 +38 add 10mm or 12.5mm. will it rub?

Bong · 06-18-2010, 09:09 PM

i'm thinking of either getting 10mm, 12.5mm spacers and wondering if it will rub or if anybody has somewhat the same setup...

im running 19x10 +38 offset w/ falken 265/30/19 on h&r race springs without rubbing.

i measured the gap and it is right at 15mm between the fender and tire. thanks.

Daya · 06-18-2010, 11:45 PM

I have an e92, lowered on KW coils, with a 19x10 ET39 wheel, falken 275-30/19, and I had to roll the fenders to avoid rubbing with a 12mm spacer.

You should be fine with the 10mm spacer but I wouldn't go any more than that.

I just noticed your name, my cousin is pinoy and his name is bong - how funny

Bong · 06-21-2010, 06:28 PM

Quote:

Originally Posted by Daya

I have an e92, lowered on KW coils, with a 19x10 ET39 wheel, falken 275-30/19, and I had to roll the fenders to avoid rubbing with a 12mm spacer.

You should be fine with the 10mm spacer but I wouldn't go any more than that.

I just noticed your name, my cousin is pinoy and his name is bong - how funny

I ended up ordering 12.5mm's for the rear since I am running a 265 instead of a 275. We'll see what happens. I can always find a fender roller and/or put a lil bit of neg camber in the rear if I have to.

I am also pinoy and my name is Bong. Are we related? haha

doctor_vino · 06-22-2010, 07:02 PM

Quote:

Originally Posted by Bong

I ended up ordering 12.5mm's for the rear since I am running a 265 instead of a 275. We'll see what happens. I can always find a fender roller and/or put a lil bit of neg camber in the rear if I have to.

BUMP FOR PICS

kamek · 06-22-2010, 07:33 PM

You'll be fine on your e90.

I'm running 19x10 et23 with 265 in the rear... fenders rolled, pulled, and shaved. still a little rub...

Bong · 06-24-2010, 01:38 PM

I just installed my ecs 12.5mm and they don't actually rub that much. Only on big bumps/dips. I might just need a degree of neg camber and ill be all set but I'm getting ahold of a fender roller this weekend to make sure it doesn't rub at all though. pics to come soon.

csupernova · 07-04-2010, 10:12 AM

Any pics yet?

ah gon · 07-04-2010, 12:42 PM

i'm running 10" et22 with 265 falken 452.fender rolled ,pulled a bit and no rubbing quarter panel except the fender liner sometime.

06-18-2010, 09:09 PM	#1
Bong Private First Class 12 Rep 101 Posts Drives: bmw Join Date: Feb 2010 Location: MI iTrader: (5)	spacer question. 19x10 +38 add 10mm or 12.5mm. will it rub? i'm thinking of either getting 10mm, 12.5mm spacers and wondering if it will rub or if anybody has somewhat the same setup... im running 19x10 +38 offset w/ falken 265/30/19 on h&r race springs without rubbing. i measured the gap and it is right at 15mm between the fender and tire. thanks.
	Appreciate 0 Tweet Quote

06-18-2010, 11:45 PM	#2
Daya Lieutenant Colonel 200 Rep 1,741 Posts Drives: e92 335 space gray/coral red Join Date: Sep 2006 Location: Chicago iTrader: (1) Garage List 2007 E92 335 [9.66]	I have an e92, lowered on KW coils, with a 19x10 ET39 wheel, falken 275-30/19, and I had to roll the fenders to avoid rubbing with a 12mm spacer. You should be fine with the 10mm spacer but I wouldn't go any more than that. I just noticed your name, my cousin is pinoy and his name is bong - how funny __________________ GIAC S2 \| Brembo GT BBK 355/345 \| BBS CH-R \| Michelin Pilot Super Sports \| AR Design: DP, S1 Oil Cooler, OCC \| AMS FMIC \| Bastuck Quad Exhaust \| Borla MP \| KW V1 \| Stett: CAI, CP \| Forge DV \| P3 Boost Gauge \| Arkym: Front Lip, Rear Quad Diffuser \| Vorsteiner CSL Trunk \| LUX H8 \| ModMyNav \| MFD M3 Sideskirts \| BMW M-Tech Front/Rear Bumpers, Edition Grills
	Appreciate 0 Quote

06-22-2010, 07:33 PM	#5
kamek Brigadier General 358 Rep 3,447 Posts Drives: 2018 X3 M40i Join Date: Mar 2008 Location: Queens, NY iTrader: (4) Garage List 2008 BMW 328xi [8.20]	You'll be fine on your e90. I'm running 19x10 et23 with 265 in the rear... fenders rolled, pulled, and shaved. still a little rub...
	Appreciate 0 Quote

06-24-2010, 01:38 PM	#6
Bong Private First Class 12 Rep 101 Posts Drives: bmw Join Date: Feb 2010 Location: MI iTrader: (5)	I just installed my ecs 12.5mm and they don't actually rub that much. Only on big bumps/dips. I might just need a degree of neg camber and ill be all set but I'm getting ahold of a fender roller this weekend to make sure it doesn't rub at all though. pics to come soon.
	Appreciate 0 Quote

07-04-2010, 10:12 AM	#7
csupernova Captain 32 Rep 606 Posts Drives: E90 330i Join Date: Sep 2007 Location: NYC iTrader: (7)	Any pics yet?
	Appreciate 0 Quote

07-04-2010, 12:42 PM	#8
ah gon Colonel 112 Rep 2,433 Posts Drives: bmw e90 Join Date: Feb 2007 Location: vancouver b.c. canada iTrader: (12)	i'm running 10" et22 with 265 falken 452.fender rolled ,pulled a bit and no rubbing quarter panel except the fender liner sometime. __________________
	Appreciate 0 Quote