Need HELP with Headlamps!!

Coltech · 01-21-2013, 11:26 PM

I have an issue with my recent purchase of my 330xi. My car is pre lci and my headlamps are lci bi xenon led turning signals. this lamps are a problem because of the turning signals are leds.. I know the footwell module.. rear brake lights replace all of these things and everything will get fixed but when on a budget I needed to improvise so I set up a parallel circuit with the turning light signal cable and the signals work just fine but my angel eyes are not working any more and so the code keeps popping up in my dash screen. and if I get rid of the parallel circuit then the angel eyes light back up.. but then the turning signals give me an error so.. I am

Please HELP!!!

Richurd · 01-22-2013, 09:50 AM

Have you tried coding it?

BOBKUR · 01-22-2013, 10:47 AM

Quote:

Originally Posted by Coltech

I have an issue with my recent purchase of my 330xi. My car is pre lci and my headlamps are lci bi xenon led turning signals. this lamps are a problem because of the turning signals are leds.. I know the footwell module.. rear brake lights replace all of these things and everything will get fixed but when on a budget I needed to improvise so I set up a parallel circuit with the turning light signal cable and the signals work just fine but my angel eyes are not working any more and so the code keeps popping up in my dash screen. and if I get rid of the parallel circuit then the angel eyes light back up.. but then the turning signals give me an error so.. I am

Please HELP!!!

Who did you buy this project car from. Sounds like previous owner did not have a clue.

Coltech · 01-22-2013, 12:54 PM

I tried coding but since the car has a module model 1 then the hardware wont take the new software.. I just dont know why the parallel circuit robs the voltage from the angel eyes since its in parallel!! and the person that i bought the car from was a friend of a friend who was trying get out of the car i guess this might be one of the reasons..

01-21-2013, 11:26 PM	#1
Coltech New Member 0 Rep 28 Posts Drives: stock E90 Join Date: Sep 2012 Location: central florida iTrader: (0)	Need HELP with Headlamps!! I have an issue with my recent purchase of my 330xi. My car is pre lci and my headlamps are lci bi xenon led turning signals. this lamps are a problem because of the turning signals are leds.. I know the footwell module.. rear brake lights replace all of these things and everything will get fixed but when on a budget I needed to improvise so I set up a parallel circuit with the turning light signal cable and the signals work just fine but my angel eyes are not working any more and so the code keeps popping up in my dash screen. and if I get rid of the parallel circuit then the angel eyes light back up.. but then the turning signals give me an error so.. I am Please HELP!!!
	Appreciate 0 Tweet Quote

01-22-2013, 09:50 AM	#2
Richurd Captain 16 Rep 639 Posts Drives: Too slow. Join Date: Jul 2009 Location: nyc iTrader: (6)	Have you tried coding it? __________________ 07 e92 335i \| BSM \| SB \| Gray Poplar Wood Trim \| 6MT \| Premium \| Sport \| Cold Weather \| iDrive \| Logic7 \| Comfort Access \|
	Appreciate 0 Quote

01-22-2013, 12:54 PM	#4
Coltech New Member 0 Rep 28 Posts Drives: stock E90 Join Date: Sep 2012 Location: central florida iTrader: (0)	I tried coding but since the car has a module model 1 then the hardware wont take the new software.. I just dont know why the parallel circuit robs the voltage from the angel eyes since its in parallel!! and the person that i bought the car from was a friend of a friend who was trying get out of the car i guess this might be one of the reasons..
	Appreciate 0 Quote