Fitting E90 BMW performance exhaust

Perth335i · 03-08-2013, 01:07 AM

Gents!

I'm chasing some info, I have a cat back BMW performance exhaust for my E90.

The existing system is standard factory.

What needs to be done to fit this? Are any cuts, joins, flanges, v clamps needed to join this up to the existing factory exhaust?

Thanks
Matt

DR-JEKL · 03-08-2013, 03:01 AM

You cut the oem mufflers off and the replacement exhaust clamps onto the oem pipes remaining

With the E90 you have the extra mid section pipe right, so have to cut the oem item also there by using a pipe cutter and then using the supplied clamps to fasten it into place, any exhaust shop should be able to do this easily for you in around an hour.

Perth335i · 03-08-2013, 08:20 AM

Thanks mate, as I assumed from the e92 DIY's. just wanted to be 100% before I started cutting

DR-JEKL · 03-08-2013, 03:15 PM

Post up some pics when you're done

Obviously the system arrived ok!?

Perth335i · 03-08-2013, 06:58 PM

Quote:

Originally Posted by DR-JEKL

Post up some pics when you're done

Obviously the system arrived ok!?

The system arrived just fine, thanks. I'm going to install some catless down pipes at the same time so just sorting those out as well.

After a few other things are installed over the coming weeks I'll post post up a "showcase" thread

DR-JEKL · 03-09-2013, 03:15 AM

Quote:

Originally Posted by Perth335i

The system arrived just fine, thanks. I'm going to install some catless down pipes at the same time so just sorting those out as well.

After a few other things are installed over the coming weeks I'll post post up a "showcase" thread

Its going to gurgle pop like a mutha now! awesome looking forward to seeing it dude

xxcferrarixx · 03-14-2013, 02:08 PM

Just got my Performance exhaust installed today, your going to love the sound OP.

03-08-2013, 01:07 AM	#1
Perth335i New Member 1 Rep 15 Posts Drives: 2008 E90 335i M-Sports Join Date: May 2012 Location: Perth, Western Australia iTrader: (0)	Fitting E90 BMW performance exhaust Gents! I'm chasing some info, I have a cat back BMW performance exhaust for my E90. The existing system is standard factory. What needs to be done to fit this? Are any cuts, joins, flanges, v clamps needed to join this up to the existing factory exhaust? Thanks Matt
	Appreciate 0 Tweet Quote

03-08-2013, 03:01 AM	#2
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	You cut the oem mufflers off and the replacement exhaust clamps onto the oem pipes remaining With the E90 you have the extra mid section pipe right, so have to cut the oem item also there by using a pipe cutter and then using the supplied clamps to fasten it into place, any exhaust shop should be able to do this easily for you in around an hour. Last edited by DR-JEKL; 03-08-2013 at 03:20 AM..
	Appreciate 0 Quote

03-08-2013, 08:20 AM	#3
Perth335i New Member 1 Rep 15 Posts Drives: 2008 E90 335i M-Sports Join Date: May 2012 Location: Perth, Western Australia iTrader: (0)	Thanks mate, as I assumed from the e92 DIY's. just wanted to be 100% before I started cutting Last edited by Perth335i; 03-08-2013 at 06:54 PM.. Reason: Grammar
	Appreciate 0 Quote

03-08-2013, 03:15 PM	#4
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	Post up some pics when you're done Obviously the system arrived ok!?
	Appreciate 0 Quote

03-14-2013, 02:08 PM	#7
xxcferrarixx Private 7 Rep 70 Posts Drives: 2011 328xi Join Date: Dec 2012 Location: Norwood, NJ iTrader: (0) Garage List 2011 BMW 328i [10.00]	Just got my Performance exhaust installed today, your going to love the sound OP.
	Appreciate 0 Quote