KW-V1 or ST-V1 coils, anyone have pics at maximum height?

blau808 · 04-24-2016, 04:20 AM

Wanted to get an idea of the range of drop available, does anyone have pics with either of these coils on at the tallest setting?

Ali-E90 · 04-24-2016, 07:40 AM

I'm curious also. Need to replace suspension soon but not looking for anything more than a minimal drop (with maintained ride comfort)

armansiu · 04-25-2016, 02:18 PM

i have mine installed on my LCI XI.
My mechanic said the rear is almost the max, it is like 1 finger gap, so around half inch.

Jeff@TopGearSolutions · 04-25-2016, 02:40 PM

KW V1 Xi

Front Lowering
0.6-1.8in (15-45mm)
Rear Lowering
0.6-1.6in (15-40mm)

ST V1 Xi
Front Lowering
0.6in-1.8in (15-45mm)
Rear Lowering
0.6in-1.6in (15-40mm)

AKA exactly the same.

Galvanized VS Stainless Steel is the only difference.

blau808 · 04-25-2016, 04:05 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

KW V1 Xi

Front Lowering
0.6-1.8in (15-45mm)
Rear Lowering
0.6-1.6in (15-40mm)

ST V1 Xi
Front Lowering
0.6in-1.8in (15-45mm)
Rear Lowering
0.6in-1.6in (15-40mm)

AKA exactly the same.

Galvanized VS Stainless Steel is the only difference.

Thanks Jeff, you had already pointed out that they are the same to me except for the metal, which is why my request is for pics of either of them at maximum height so I can see how it looks. I've read the specs of .6 inches minimum, but I'd like to see how that looks.

Jeff@TopGearSolutions · 04-25-2016, 04:10 PM

Quote:

Originally Posted by blau808

Thanks Jeff, you had already pointed out that they are the same to me except for the metal, which is why my request is for pics of either of them at maximum height so I can see how it looks. I've read the specs of .6 inches minimum, but I'd like to see how that looks.

Most guys aim for the lower settings so it would be a hard request albeit a reasonable one.

blau808 · 04-25-2016, 04:15 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

Most guys aim for the lower settings so it would be a hard request albeit a reasonable one.

I guess my concern is really about speedbumps and steep driveways as my wife also drives the car and if either of these occur then the coils will not get approved.

Misty · 04-28-2016, 09:22 PM

i have stv1 the first day of install it was a lengthy process we finished around 5am on a school night i couldnt adjust them properly so the front was raised all the way and the back was dumped with the front raised all the way the tire gap was more then enough room for my fist to fit im in new york roads are awful here

04-24-2016, 04:20 AM	#1
blau808 Second Lieutenant 88 Rep 253 Posts Drives: E90 F31 X5 Join Date: Dec 2012 Location: PNW iTrader: (0)	KW-V1 or ST-V1 coils, anyone have pics at maximum height? Wanted to get an idea of the range of drop available, does anyone have pics with either of these coils on at the tallest setting?
	Appreciate 0 Tweet Quote

04-24-2016, 07:40 AM	#2
Ali-E90 Colonel 379 Rep 2,365 Posts Drives: 2007 E90 323i (Cdn) Join Date: May 2013 Location: Toronto, Canada iTrader: (3) Garage List 2008 BMW M3 [8.00] 2007 BMW 323i [8.50]	I'm curious also. Need to replace suspension soon but not looking for anything more than a minimal drop (with maintained ride comfort) __________________ Check out my Mod Thread Here
	Appreciate 0 Quote

04-25-2016, 02:18 PM	#3
armansiu Second Lieutenant 20 Rep 241 Posts Drives: e90 328xi Join Date: Nov 2012 Location: GTA iTrader: (0)	i have mine installed on my LCI XI. My mechanic said the rear is almost the max, it is like 1 finger gap, so around half inch.
	Appreciate 0 Quote

04-25-2016, 02:40 PM	#4
Jeff@TopGearSolutions 3441 Rep 79,212 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	KW V1 Xi Front Lowering 0.6-1.8in (15-45mm) Rear Lowering 0.6-1.6in (15-40mm) ST V1 Xi Front Lowering 0.6in-1.8in (15-45mm) Rear Lowering 0.6in-1.6in (15-40mm) AKA exactly the same. Galvanized VS Stainless Steel is the only difference.
	Appreciate 0 Quote

04-28-2016, 09:22 PM	#8
Misty First Lieutenant 60 Rep 309 Posts Drives: BMW 328xi 2007 Join Date: Aug 2015 Location: NY iTrader: (0)	i have stv1 the first day of install it was a lengthy process we finished around 5am on a school night i couldnt adjust them properly so the front was raised all the way and the back was dumped with the front raised all the way the tire gap was more then enough room for my fist to fit im in new york roads are awful here
	Appreciate 0 Quote