Halogen to HID Errors

Shahaed · 06-18-2014, 04:57 AM

Okay guys, I can code now! Yay

The reason I am doing this is to reset errors on my headlights. So I've looked this up and searched the thread, but a lot of the links are broken etc.

I'm looking to get rid of theses errors. I know they are in the FRM module. I've turned off hot and cold low beam bulb check. Yet the errors proceed. Any help? Also I get the red car on a lift error (means something wrong with electronics) how do I get rid of that too? Is there a way with an error reset?

Here are the errors:http://postimg.org/image/bxps13oqz/
http://postimg.org/image/x8nc5d6vf/

Delta0311 · 06-18-2014, 05:38 AM

I did the whole conversion when I had a 328.

Error 1
This is coming up because the HID bulbs are set at 35W while the halogens are set at 50W. You can either code it out or get a ballast with an error cancelor built in, or just get error cancelors and connect them to the ballast. In my case I had ballast with the cancelors built in so I never got the error. Actually only time I did was when a bulb actually burnt out.

Error 2
Not 100% sure but it can mean a series of things. The first thing that comes to mind is that the car is due for some sort of an inspection.

Shahaed · 06-18-2014, 04:03 PM

The second error is from the conversion. It means electronic failure. Which modules do I need to code the errors out? And how do I reset all errors?

06-18-2014, 04:57 AM	#1
Shahaed Second Lieutenant 21 Rep 268 Posts Drives: BMW E90 Join Date: Mar 2011 Location: Iowa iTrader: (0)	Halogen to HID Errors Okay guys, I can code now! Yay The reason I am doing this is to reset errors on my headlights. So I've looked this up and searched the thread, but a lot of the links are broken etc. I'm looking to get rid of theses errors. I know they are in the FRM module. I've turned off hot and cold low beam bulb check. Yet the errors proceed. Any help? Also I get the red car on a lift error (means something wrong with electronics) how do I get rid of that too? Is there a way with an error reset? Here are the errors:http://postimg.org/image/bxps13oqz/ http://postimg.org/image/x8nc5d6vf/ Last edited by Shahaed; 06-18-2014 at 05:22 AM..
	Appreciate 0 Tweet Quote

06-18-2014, 05:38 AM	#2
Delta0311 Banned 7478 Rep 10,120 Posts Drives: 2011 BMW 335xi E92 2016 228xi Join Date: Apr 2009 Location: NJ iTrader: (1)	I did the whole conversion when I had a 328. Error 1 This is coming up because the HID bulbs are set at 35W while the halogens are set at 50W. You can either code it out or get a ballast with an error cancelor built in, or just get error cancelors and connect them to the ballast. In my case I had ballast with the cancelors built in so I never got the error. Actually only time I did was when a bulb actually burnt out. Error 2 Not 100% sure but it can mean a series of things. The first thing that comes to mind is that the car is due for some sort of an inspection.
	Appreciate 0 Quote

06-18-2014, 04:03 PM	#3
Shahaed Second Lieutenant 21 Rep 268 Posts Drives: BMW E90 Join Date: Mar 2011 Location: Iowa iTrader: (0)	The second error is from the conversion. It means electronic failure. Which modules do I need to code the errors out? And how do I reset all errors?
	Appreciate 0 Quote