Vishnu Maps

marcvtec · 06-01-2011, 02:38 PM

So none of the last DIC maps agreed with my car, I was always getting un-even throttle control between 3-4k in all gears while keeping the pedal steady.
Some said clutch is bad, some said no way it can't be the map

.

Now, after loading the 12-17 map everything is fine.
So if your having a crap driving experience with dic maps try 12-17.

Perhaps maybe by this fall there will be some actual non-beta maps, that are suppose to work with all the cars.

dzenno · 06-01-2011, 02:42 PM

did you reset your adaptations through command center after loading up the latest maps/firmware...if you didn't you'll have all kinds of issues..

rgpwr · 06-01-2011, 02:46 PM

I've had no problems and excellent results with the current 5-10 DIC maps. Beta is just a word. Shiv could take 5-10, rename them 6-1 Stable, and very few people would know.

s2k_335i · 06-01-2011, 02:47 PM

i received all kind of issues/codes but after reset and on/off on the start button, it works fine with 5-10 map.

marcvtec · 06-01-2011, 02:50 PM

Quote:

Originally Posted by dzenno

did you reset your adaptations through command center after loading up the latest maps/firmware...if you didn't you'll have all kinds of issues..

Yes sir, i did that with the 3-15 and 3-30 map
I have yet to try the 5-10. Because i have been running this 12-17 for a bit to make sure there is nothing wrong mechanically with my car.

Bakeme521 · 06-01-2011, 02:58 PM

Have you contacted shiv before making a thread about it??

C4sF80M3 · 06-01-2011, 03:33 PM

Quote:

Originally Posted by marcvtec

So none of the last DIC maps agreed with my car, I was always getting un-even throttle control between 3-4k in all gears while keeping the pedal steady.
Some said clutch is bad, some said no way it can't be the map

.

Now, after loading the 12-17 map everything is fine.
So if your having a crap driving experience with dic maps try 12-17.

Perhaps maybe by this fall there will be some actual non-beta maps, that are suppose to work with all the cars.

I just ran my car with the 5-10 maps for 3 hrs up and down some mountains in 90F heat and high humidity without a single hiccup. I would agree that you need to double check the adaptation resets and make sure you followed the reset procedures correctly.

DaFish · 06-04-2011, 11:55 AM

Quote:

Originally Posted by Bakeme521

Have you contacted shiv before making a thread about it??

1

Phone them... they are great

3coupe · 07-02-2011, 03:54 AM

where can i find the adaptation reset procedures?

i once did the reset, and my car had an asthma attack and throwing codes like crazy. so i had to reinstall my 5-10 maps. now i can't find the reset procedures, does anyone know what i'm doing wrong?

enrita · 07-02-2011, 06:08 AM

Quote:

Originally Posted by 3coupe

where can i find the adaptation reset procedures?

i once did the reset, and my car had an asthma attack and throwing codes like crazy. so i had to reinstall my 5-10 maps. now i can't find the reset procedures, does anyone know what i'm doing wrong?

Load the new 6-14 beta posted on their site with V5 sofyware, first firmware, remove key, reinsert key after 5 sec, load maps, do adaptation reset with ign on engine off (the reset has already been explained to you on another thread) Remove key 5 sec and start the car.
Command center: http://vishnutuningforum.com/viewtop...401685d23352b6

**335i** · 07-02-2011, 07:24 AM

how reset adaptations if some people do not have cruise stalk button

KyLu II · 07-02-2011, 07:29 AM

Quote:

Originally Posted by **335i**

how reset adaptations if some people do not have cruise stalk button

Bt tool

**335i** · 07-02-2011, 07:30 AM

Quote:

Originally Posted by Schnitzel

I disconnected the battery for about one hour. IMHO the effect must be the same

this is aka reseting adaptations, hope eventually wheel steering buttons sees a light on v5

The Ghost · 07-03-2011, 12:51 AM

Quote:

Originally Posted by dzenno

did you reset your adaptations through command center after loading up the latest maps/firmware...if you didn't you'll have all kinds of issues..

I didn't know you had to do any resetting.

Looking at their Firmware and Map load how-to, and their associated videos, it doesn't mention needing to reset anything following a firmware and map load.

Quote:

Originally Posted by vishnutuningforum.com

Now you will upload the desired baseline map that you downloaded (and uncompressed) earlier. Once uncompressed, you will see a ".pcd" at the end of the file name. With the PROcede Online (actively communicating with your laptop), select "Open" from the "File" menu. Select the map you want. The entire map loading process takes up to a minute. You will be given status updates along the way (0-100%). Once complete, you may start the engine and go for a drive.
vishnut_vadmin

Which adaptation is needed to be reset, or should one just "reset ECU (Procede)" using the user software?

The Ghost · 07-04-2011, 02:57 PM

Quote:

Originally Posted by The Ghost

I didn't know you had to do any resetting.

Looking at their Firmware and Map load how-to, and their associated videos, it doesn't mention needing to reset anything following a firmware and map load.

Which adaptation is needed to be reset, or should one just "reset ECU (Procede)" using the user software?

Anyone?

pinky_and_me · 07-04-2011, 03:10 PM

I think that's a bit old, every version of the maps and firmware I've seen comes with a Readme file that describes the update procedure which includes resetting several things via command center.

Jeff@TopGearSolutions · 07-04-2011, 03:49 PM

You should reset adaptions in Mode 3. Items 12,11,10,9,8,7,6,5,4,3,2,1 in that order on every firmware update, map update, as well as any hiccup that magically comes about.

It is a prerequisite to all trouble shooting problems before moving forward.

3coupe · 07-05-2011, 12:40 PM

when you select mode three, does it start at item 1? or zero?

cause as i move up or down the item, its always +1. for example. if i count to item 9 assuming default at 0, the speedometer needle is pointing at 100.

Jeff@TopGearSolutions · 07-05-2011, 12:43 PM

Quote:

Originally Posted by 3coupe

when you select mode three, does it start at item 1? or zero?

cause as i move up or down the item, its always +1. for example. if i count to item 9 assuming default at 0, the speedometer needle is pointing at 100.

If I recall, 120 KMH is "12" on the US speedo.

So where the 120 is in KMH is "12".

jason335777 · 07-05-2011, 06:45 PM

Ok, I finally "upgraded" to the 12-17 maps. Let me say...holy crap, the car is unbelievably fast now. And before you say oh well the 5-10 maps are just as fast but smooth, I doubt it. The car pulls so hard and just rockets ahead. I pulled on the highway, and run through a couple gears and looked down and was at 130. This is what I thought the Procede would be when I bought it.
With the Procede, I havent had one error code or any problems whatsoever...with either map. This thing is great!
I am going to the 1/4 track this Thursday, and will see what she runs.

NM_BMW · 07-06-2011, 10:53 AM

As an alternative, the adaption reset should be able to be performed through the Vishnu software. I'm surprised Shiv hasn't implemented this into the software yet, instead of relying on the cruise control stalk that not everyone has.

OpenFlash · 07-06-2011, 10:54 AM

In actuality, the adaptation resets aren't 100% necessary. Just a good idea. It's the Procede reset that is most important.

06-01-2011, 02:38 PM	#1
marcvtec Banned 407 Rep 2,704 Posts Drives: M5 Join Date: Oct 2006 Location: toronto iTrader: (0)	Vishnu Maps So none of the last DIC maps agreed with my car, I was always getting un-even throttle control between 3-4k in all gears while keeping the pedal steady. Some said clutch is bad, some said no way it can't be the map . Now, after loading the 12-17 map everything is fine. So if your having a crap driving experience with dic maps try 12-17. Perhaps maybe by this fall there will be some actual non-beta maps, that are suppose to work with all the cars.
	Appreciate 0 Tweet Quote

06-01-2011, 02:42 PM	#2
dzenno Banned 273 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	did you reset your adaptations through command center after loading up the latest maps/firmware...if you didn't you'll have all kinds of issues..
	Appreciate 0 Quote

06-01-2011, 02:46 PM	#3
rgpwr Second Lieutenant 6 Rep 294 Posts Drives: 08.M6 Join Date: Sep 2009 Location: Ft. Lauderdale iTrader: (0)	I've had no problems and excellent results with the current 5-10 DIC maps. Beta is just a word. Shiv could take 5-10, rename them 6-1 Stable, and very few people would know. __________________ [ 09.e92.335i.a52 / procede.v5 / ets.fmic / afe.intake / eibach.pro / avantgarde.m310 / dimisa.4 / cityvision.ae ]
	Appreciate 0 Quote

06-01-2011, 02:47 PM	#4
s2k_335i This is it!! 15 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	i received all kind of issues/codes but after reset and on/off on the start button, it works fine with 5-10 map. __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

06-01-2011, 02:58 PM	#6
Bakeme521 Some say... 239 Rep 4,296 Posts Drives: Fresh Join Date: Mar 2010 Location: Baton Rouge n NOLA iTrader: (12) Garage List 2007 BMW 335i [8.24]	Have you contacted shiv before making a thread about it?? __________________ I have exhaust and an intake...
	Appreciate 0 Quote

07-02-2011, 03:54 AM	#9
3coupe Captain 31 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	where can i find the adaptation reset procedures? i once did the reset, and my car had an asthma attack and throwing codes like crazy. so i had to reinstall my 5-10 maps. now i can't find the reset procedures, does anyone know what i'm doing wrong? __________________ BMW E92 335i retired: 04 BMW M3 \| 05 Honda S2000 \| 03 BMW 330ci \| 01 Honda Prelude \| 99 Acura Type-R
	Appreciate 0 Quote

07-02-2011, 07:24 AM	#11
335i Colonel 184 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	how reset adaptations if some people do not have cruise stalk button __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote

07-04-2011, 03:10 PM	#16
pinky_and_me Second Lieutenant 12 Rep 294 Posts Drives: N54 335xi Join Date: Feb 2011 Location: Cleveland, OH iTrader: (0)	I think that's a bit old, every version of the maps and firmware I've seen comes with a Readme file that describes the update procedure which includes resetting several things via command center.
	Appreciate 0 Quote

07-04-2011, 03:49 PM	#17
Jeff@TopGearSolutions 3441 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	You should reset adaptions in Mode 3. Items 12,11,10,9,8,7,6,5,4,3,2,1 in that order on every firmware update, map update, as well as any hiccup that magically comes about. It is a prerequisite to all trouble shooting problems before moving forward.
	Appreciate 0 Quote

07-05-2011, 12:40 PM	#18
3coupe Captain 31 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	when you select mode three, does it start at item 1? or zero? cause as i move up or down the item, its always +1. for example. if i count to item 9 assuming default at 0, the speedometer needle is pointing at 100. __________________ BMW E92 335i retired: 04 BMW M3 \| 05 Honda S2000 \| 03 BMW 330ci \| 01 Honda Prelude \| 99 Acura Type-R
	Appreciate 0 Quote

07-05-2011, 06:45 PM	#20
jason335777 Private 10 Rep 84 Posts Drives: 335i Join Date: Jan 2010 Location: Pittsburgh iTrader: (0)	Ok, I finally "upgraded" to the 12-17 maps. Let me say...holy crap, the car is unbelievably fast now. And before you say oh well the 5-10 maps are just as fast but smooth, I doubt it. The car pulls so hard and just rockets ahead. I pulled on the highway, and run through a couple gears and looked down and was at 130. This is what I thought the Procede would be when I bought it. With the Procede, I havent had one error code or any problems whatsoever...with either map. This thing is great! I am going to the 1/4 track this Thursday, and will see what she runs. __________________ 2007 BMW 335i, Jet Black, Sport, 19" Wheels, custom trim, m shifter, Procede v5 Rev.3 369rwhp, Best 1/4 12.8 @ 108 2003 Hyundai Tiburon GT, Supercharged (stage 2, 280whp), Full mods, meth, coilovers, wheels, full stereo 2004 Suzuki GSX-R600, flush signals, undertail delete, carbon fiber exhaust
	Appreciate 0 Quote

07-06-2011, 10:53 AM	#21
NM_BMW Vishnu Powered 68 Rep 2,205 Posts Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding iTrader: (7)	As an alternative, the adaption reset should be able to be performed through the Vishnu software. I'm surprised Shiv hasn't implemented this into the software yet, instead of relying on the cruise control stalk that not everyone has. __________________ 2008 335xi Sedan \| Titanium Silver \| Black Dakota PROcede v5 \| Vishnu Exhaust \| BMS DCI \| AR Catless DPs \| Helix FMIC \| Stett Charge w/ Tial BOV \| MORR VS8s \| KWv3
	Appreciate 0 Quote

07-06-2011, 10:54 AM	#22
OpenFlash 1737 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	In actuality, the adaptation resets aren't 100% necessary. Just a good idea. It's the Procede reset that is most important.
	Appreciate 0 Quote