HSF-4 to Procede setup check (Hopefully a future DIY guide)

JMARS · 07-18-2012, 10:44 PM

Nice man congrats!

F80M · 07-19-2012, 10:39 AM

This is great. Congrats and thanks for doing this. Please do post an update HSF-4 to Procede diagram once it's done...it'll be very helpful for other people in the future including me...

May I ask how much did you buy HSF-4 for? Were there anymore additional parts needed to complete this installation?

Thank,

JMARS · 07-19-2012, 12:14 PM

Quote:

Originally Posted by 91Octane

This is great. Congrats and thanks for doing this. Please do post an update HSF-4 to Procede diagram once it's done...it'll be very helpful for other people in the future including me...

May I ask how much did you buy HSF-4 for? Were there anymore additional parts needed to complete this installation?

Thank,

Here you go

Howerton Engineering HFS-4

dblrguy · 07-19-2012, 10:22 PM

Quote:

Originally Posted by 91Octane

Were there anymore additional parts needed to complete this installation?

If your charge pipe already has aquamist meth bungs there is nothing else you need to get for the kit to work. It is truly a complete kit. What you need are supporting items to be able to properly install the kit. Here is a quick list of the things I used:

Drill bit to make a hole for fuel line out of the trunk
wire strippers
grommets to protect the fuel line through the hole
adhesive backed zip tie blocks
zip ties
cable conduit for the fuel line to be in under the car
posi-taps
some extra wire for testing purposes
one or two gallons of plain distilled water used to prime and test the system
some two inch L brackets and hardware to secure the tank in the trunk for movement and tipping
mesh wire sleeve for a cleaner looking install for the visible bits of tubing and wires

dblrguy · 07-19-2012, 10:23 PM

Here is the new connection diagram from aquamist:

Name: HFS4-N54-procede-Rev3.gif
Views: 11838
Size: 175.4 KB

JMARS · 11-27-2012, 09:31 PM

HUGE UPDATE for you HFS-3 guys.

We need to use the BLUE wire instead of the WHITE wire the HFS-4 guys use for FLOW SIGNAL out of the Green USER wire.

I've been back and forth with Jeff at Howerton Engineering and he's been back in forth with Aquamist UK for the last 2 weeks.
So Happy we finally got this figured out!

badass335 · 11-27-2012, 10:15 PM

i dont get this.... I have the HFS-4 and mine works fine with Procede. Signal etc all works. Been working for the last 3 months!

OOPPSS.. Just noticed that you mentioned HFS-3 and not the HFS-4!! my bad!

cocoturkey · 11-28-2012, 12:20 AM

since PROCede is controlling everything, why did you choose HFS-4 instead of HFS-3 or HFS-2??

07-18-2012, 10:44 PM	#23
JMARS Not Baned 86 Rep 1,352 Posts Drives: e92 Single-T Join Date: Aug 2008 Location: Boca Raton, FL iTrader: (5)	Nice man congrats! __________________ FFTEC 900 - 6466 \| PR PI Stg4 \| Motiv Tune/BB/FF \| Spec Stg 2+ \| Quaife LSD \| DSS Half-shafts VRSF Race IC \| VRSF Charge Pipe \| Evo Dual Oil Cooler \| BC Coilover \| To be continued...
	Appreciate 0 Quote

07-19-2012, 10:39 AM	#24
F80M Major 88 Rep 1,456 Posts Drives: M Fap Join Date: Aug 2011 Location: in your rear view mirror... iTrader: (2)	This is great. Congrats and thanks for doing this. Please do post an update HSF-4 to Procede diagram once it's done...it'll be very helpful for other people in the future including me... May I ask how much did you buy HSF-4 for? Were there anymore additional parts needed to complete this installation? Thank,
	Appreciate 0 Quote

07-19-2012, 10:23 PM	#27
dblrguy Private 11 Rep 93 Posts Drives: 2010 335i & 06 330i Join Date: Jun 2006 Location: Virginia iTrader: (0)	New HSF-4 wire diagram Here is the new connection diagram from aquamist:
	Appreciate 0 Quote

11-27-2012, 09:31 PM	#28
JMARS Not Baned 86 Rep 1,352 Posts Drives: e92 Single-T Join Date: Aug 2008 Location: Boca Raton, FL iTrader: (5)	HUGE UPDATE for you HFS-3 guys. We need to use the BLUE wire instead of the WHITE wire the HFS-4 guys use for FLOW SIGNAL out of the Green USER wire. I've been back and forth with Jeff at Howerton Engineering and he's been back in forth with Aquamist UK for the last 2 weeks. So Happy we finally got this figured out! __________________ FFTEC 900 - 6466 \| PR PI Stg4 \| Motiv Tune/BB/FF \| Spec Stg 2+ \| Quaife LSD \| DSS Half-shafts VRSF Race IC \| VRSF Charge Pipe \| Evo Dual Oil Cooler \| BC Coilover \| To be continued...
	Appreciate 0 Quote

11-27-2012, 10:15 PM	#29
badass335 Lieutenant Colonel 109 Rep 1,948 Posts Drives: 2017 540i Xdrive Join Date: Jul 2007 Location: Surrey, BC iTrader: (10)	i dont get this.... I have the HFS-4 and mine works fine with Procede. Signal etc all works. Been working for the last 3 months! OOPPSS.. Just noticed that you mentioned HFS-3 and not the HFS-4!! my bad!
	Appreciate 0 Quote

11-28-2012, 12:20 AM	#30
cocoturkey Lieutenant 24 Rep 441 Posts Drives: 08' e92 335i Join Date: Jan 2008 Location: Taipei iTrader: (0)	since PROCede is controlling everything, why did you choose HFS-4 instead of HFS-3 or HFS-2??
	Appreciate 0 Quote