[jphughan]

Originally Posted by Pseudo Nim

I'm curious about this too. I bet it's a hardware functionality, though. The radio must support it, and then there is nothing to code.

It's both hardware and coding. Contact Mike Benvo asking for a combox retrofit. He should be able to hook you up with the hardware and perform the coding, even remotely if you're not in the LA area.

[Pseudo Nim]

Originally Posted by jphughan

It's both hardware and coding. Contact Mike Benvo asking for a combox retrofit. He should be able to hook you up with the hardware and perform the coding, even remotely if you're not in the LA area.

Coding's not an issue, I'm comfortable with it - but the combox is only for iDrive vehicles, no? What if you have a non-iDrive Logic7?

[jphughan]

Originally Posted by Pseudo Nim

Coding's not an issue, I'm comfortable with it - but the combox is only for iDrive vehicles, no? What if you have a non-iDrive Logic7?

Fyi retrofit coding is a tad more complicated than simpler coding (changing VOs, installing updated software if necessary, etc), but I'm not sure what happens with non-iDrive cars. Do non-iDrive cars produced as of 9/2010 even support BT audio? If they do, it's probably through Combox, in which case I'd imagine the retrofit would be the same. If they don't, then maybe there's no way to get BT Audio on non-iDrive cars.

[Tampa-KerscherE90]

exactly how hard is it to do? Is there any possibility of ruining the ECU? Is there a master default setting?

[Car54]

Originally Posted by Tampa-KerscherE90

exactly how hard is it to do? Is there any possibility of ruining the ECU? Is there a master default setting?

I'm Lutz and currently have the cable and working on getting this stuff to work. PM me your info and maybe we can work something out.

[patrickkc]

Originally Posted by *******_

im at work now, when get back home i will correct that file,

cheers

not a problem, take your time

Thanks

[Dziqsek_]

Originally Posted by patrickkc

not a problem, take your time

Thanks

Here you go, hope it will work for you if not give me a sign and i will try to do some more

[patrickkc]

Originally Posted by *******_

Here you go, hope it will work for you if not give me a sign and i will try to do some more

thanks!! I will give it a try and report back!

[holmes011]

im going to get killed for this question but the cornering lights are the ones that move as you go around corners, right? and does this delete get rid of them entirely?

[Dziqsek_]

I deleted for him only 3 amber leds on headlight not adaptive cornering lights

[patrickkc]

Originally Posted by *******_

I deleted for him only 3 amber leds on headlight not adaptive cornering lights

*******, sadly it didn't work. His 3 amber leds are still on. I changed your file name back to .MAN and replaced the one from the car and the 3 LEDs still comes on.

These 3 amber leds are a tricky one.. haha

[Dziqsek_]

Originally Posted by patrickkc

*******, sadly it didn't work. His 3 amber leds are still on. I changed your file name back to .MAN and replaced the one from the car and the 3 LEDs still comes on.

These 3 amber leds are a tricky one.. haha

I sit today to work a bit with your file, im pretty sure this one will work
Let me know cause i find some more options to go in case its not working but im 80% sure it will

[patrickkc]

Originally Posted by *******_

I sit today to work a bit with your file, im pretty sure this one will work
Let me know cause i find some more options to go in case its not working but im 80% sure it will

I think I have tried changing to wert_02 before, but a long with other codes, so maybe just changing these 2 values will work. Because I don't have access to the car everyday, what would be some other codes if this one fails? Just in case, so I don't have to keep going back and forth with the car.


I will report back after trying the two lines that were changed, but if you found other option, could you kindly highlight them in the file and I can test them out if one fails.

Thanks!!

[patrickkc]

Originally Posted by *******_

Its not on wert_02 just code it it will work tested it today on customers car

ooh, I will try tonight and report back!

[Dziqsek_]

Originally Posted by patrickkc

ooh, I will try tonight and report back!

Tonight 3am here already

I will check your progress in about 6-7hours , good night

[patrickkc]

Originally Posted by *******_

Tonight 3am here already

I will check your progress in about 6-7hours , good night

I tried it. Changed the 2 lines to wert_04 and his 3 leds still come on.

Unsuccessful

[Dziqsek_]

Hmm maybe he have some wiring mod?? I tried on my client us spec 335i and it worked, have you tried only this two werts or copy whole text from my file ?

[patrickkc]

Originally Posted by *******_

Hmm maybe he have some wiring mod?? I tried on my client us spec 335i and it worked, have you tried only this two werts or copy whole text from my file ?

The car is stock and there is no wiring mods. I changed your file to FSW_PSW.MAN and replace the one in WORK and code the car, so it is using the file you sent back. I have software that checks the changes made between the 2 files and I have tried to code the 5 lines you changed manually as well and still no go.

The US spec 335i that you coded, was it a E90 or a E92/93? I coded a 328 E90 and I was able to turn off the 3 led, but on the E92/93s they have different headlights and it is those 3 amber leds that I can't get off.

I know this is confusing, but just to clarify I have attached 2 pictures. One is the E90 LCI headlights and one is E92 335is LCI headlights. They both have 3 leds on the side, but are completely different headlights.

The red car headlights I can code, but the blue car headlights is the one with a lot of trouble.

[Bendercle]

Makes me feel better that you experts are also working on the LCI E92 corner delete and not getting it :P

In my case was on a 2012 335is, tried lots of things couldn't get it.

[M3coupe]

I'm new to this forum but not to the world of coding. I have a 2011 335is with the lights that seem to be giving some issues. I will start experimenting on my car to turn these off. Let you know

[icucCoding]

The newer LEDs are little different than 07 and 08 models and I haven't had any success so far.

[cn555ic]

What are the codes to code out those little LEDs for older
Cars???