|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Wheel Fitment Square SET UP ?
|
|
06-13-2012, 07:37 AM | #2 |
A family of bimmers
2747
Rep 7,742
Posts |
did you search for something besides an xi? but to fit a 9.5 et27 up front you'll need stretched tires and camber. That will extend an extra 26mm from stock and have 12mm less clearance inside as well which i think hits the strut. Just go with 19x9 et35 with 235s or 245s and call it a day.
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
06-13-2012, 02:48 PM | #3 |
Colonel
163
Rep 2,823
Posts |
Yes it will fit. And inner clearance is fine. I have 9.5 et35 front which is 2-3mm from stock struts. Et27 will be around 0.5 inches from stock struts.
Just use 235/35 tyres front No need to mess with camber unless you want wider tyres to front then its different story. Here is few samples 19x9.5 et 30 with 235/35 basically the same as et27. http://www.e90post.com/forums/showth...ight=rotiforms this one has 18x9.5 et27 with 225/40 http://www.stanceworks.com/forums/sh...d.php?p=525546 I know probably not Xi´s , but does it matter isn´t the fitment the same?You only need to try to keep your tyres rolling diameter about the same between front and rear. Last edited by MonacoBlueE90; 06-13-2012 at 03:18 PM.. |
Appreciate
0
|
06-13-2012, 03:01 PM | #4 |
A family of bimmers
2747
Rep 7,742
Posts |
^ i guess all that matters is if he is low enough to pull it off and wants to rock skinny stretched tires
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
06-13-2012, 04:09 PM | #5 |
Book Worm
52
Rep 549
Posts |
It will fit. My fronts are 18x9.5 et 25 with a 255/35 tire
__________________
| 2015 MW F82 M4 DCT | 2018 BS F30 340XI Msport 6MT | 2011 AW E92 335XI Msport 6MT Pic Thread |
|
Appreciate
0
|
Bookmarks |
|
|