|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
radio not clear after upgrade
|
|
08-31-2014, 05:12 PM | #1 |
Private First Class
37
Rep 154
Posts |
radio not clear after upgrade
I have installed a pioneer avh 5600bt head unit and connected a aerial adaptor for the radio. The problem i have is that no station is clear at all they all crackle but when i had original hu it was crystal clear. Does anyone else had a similar problem
|
09-02-2014, 11:57 AM | #2 |
Captain
69
Rep 994
Posts |
make sure power antenna wire is connected in the harness. this is almost always the culprit, since the antenna amp needs power.
__________________
iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
|
Appreciate
0
|
09-02-2014, 07:53 PM | #4 |
Captain
28
Rep 609
Posts |
So I looked up your model on Crutchfield, and it says it doesn't fit my E90.
Closest model I could find was the AVH-X4600BT, and it recommends installing a Metra 40-EU10 adapter as an antenna adapter for the unit. Going to guess you never got some sort of antenna adapter? |
Appreciate
0
|
09-03-2014, 02:44 PM | #5 |
Private First Class
37
Rep 154
Posts |
iv got 2 adaptors one is simple plugs from original aerial to the stereo and the opther one has a amplifiers which has a power wire. i have tried both but still doesnt improve quality
|
Appreciate
0
|
Bookmarks |
|
|