VMR V710 and AG M310 Comparison

BMW_fun · 06-02-2012, 10:16 AM

Hi, mates,
I am considering a new setup for my BMW. I'm going for 18" wheels, because of a poor roads in my country. I see that almost of You are running 19"s, so that's why I'm creating this topic. I'm considering between two choices:
VMR V710, 18x8,5 ET 35 front and 18x9,5 ET 33 rear.
Avant Garde M310, 18x8 ET 35 front and 18x9 ET 38 rear.

As I found some information, AG wheels are stronger than VMR. My questions are:
Which setup (VMR or AG) will be more pushed outside in the fenders or both setups will look almost the same?
Also, which wheels will have more concavity?

BTW, pictures with concrete setup I mentioned would be highly appreciated. Thank You!

Route 16 · 06-02-2012, 10:21 AM

I think AG is the winner.

BMW_fun · 06-02-2012, 10:24 AM

It's because they are low cast made or why? VMR's are 9,5 in the rear and AG are 9 in the rear, so I assume that wider wheel will be more concave, or am I wrong?

06-02-2012, 10:16 AM	#1
BMW_fun Private 3 Rep 55 Posts Drives: E90_320d Join Date: Jun 2012 Location: LT iTrader: (0)	VMR V710 and AG M310 Comparison Hi, mates, I am considering a new setup for my BMW. I'm going for 18" wheels, because of a poor roads in my country. I see that almost of You are running 19"s, so that's why I'm creating this topic. I'm considering between two choices: VMR V710, 18x8,5 ET 35 front and 18x9,5 ET 33 rear. Avant Garde M310, 18x8 ET 35 front and 18x9 ET 38 rear. As I found some information, AG wheels are stronger than VMR. My questions are: Which setup (VMR or AG) will be more pushed outside in the fenders or both setups will look almost the same? Also, which wheels will have more concavity? BTW, pictures with concrete setup I mentioned would be highly appreciated. Thank You!
	Appreciate 0 Tweet Quote

06-02-2012, 10:21 AM	#2
Route 16 I got lei'd 844 Rep 7,593 Posts Drives: '10 E90 M3 Join Date: Sep 2011 Location: Dark Side of the Moon iTrader: (62)	I think AG is the winner.
	Appreciate 0 Quote

06-02-2012, 10:24 AM	#3
BMW_fun Private 3 Rep 55 Posts Drives: E90_320d Join Date: Jun 2012 Location: LT iTrader: (0)	It's because they are low cast made or why? VMR's are 9,5 in the rear and AG are 9 in the rear, so I assume that wider wheel will be more concave, or am I wrong?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search