E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Weird noise when steering after trunk meth install



Reply
 
Thread Tools Search this Thread
      01-13-2013, 09:33 PM   #1
Flava
Private
3
Rep
69
Posts

Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

iTrader: (0)

Weird noise when steering after trunk meth install

So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
Appreciate 0
      01-13-2013, 09:35 PM   #2
Fully_Bolted
Banned
11
Rep
442
Posts

Drives: E92 335i
Join Date: Sep 2012
Location: USA

iTrader: (0)

Quote:
Originally Posted by Flava
So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
It's a really bad idea to run meth or any fuel line in the interior of your car. I would reroute it and address your noise at the same time.
Appreciate 0
      01-13-2013, 10:58 PM   #3
robc1976
DIYER
robc1976's Avatar
613
Rep
5,521
Posts

Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (14)

Quote:
Originally Posted by Flava View Post
So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
If you routed your meth line thru steering grommet your meth line could be hitting the steering gear.
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
Appreciate 0
      01-14-2013, 06:15 AM   #4
BEAR-AvHistory
2020 Z4 M40i - 2022 M4C Convt
BEAR-AvHistory's Avatar
United_States
3124
Rep
5,264
Posts

Drives: 2020 Z4 M40i - 2022 M4C Convrt
Join Date: Jun 2011
Location: Raleigh, NC - OIB, NC

iTrader: (0)

Garage List
Hopefully you will reroute it outside the car before you burn it down.
__________________
Kevin
Dravit Gray, Black Leather, Moonlight Roof, Red Calipers

2022 M4C - 2020 Z4 M40i - 2023 FORD Expedition XLT Max 4X4 400BHP - 2009 V-Star - 1998 Ranger 4X4 5MT - 1965 Cobra (R) 5MT - 2023 Jeep Wrangler Sport S 6MT
Appreciate 0
      01-14-2013, 10:10 AM   #5
e1001usa
Private First Class
1
Rep
117
Posts

Drives: 2007 335i
Join Date: Sep 2011
Location: Maryland

iTrader: (0)

Yeah please reroute that as soon as possible
Appreciate 0
      01-14-2013, 12:45 PM   #6
Flava
Private
3
Rep
69
Posts

Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

iTrader: (0)

I'll likely be keeping it through the interior as its all one long piece and hidden under trim so I don't see the line being compromised. If anything is going to catch fire it'll likely be in the engine bay (as almost all fires we have heard of) where a connection leaks and the meth comes in contact with something hot. That or under the car if the line gets compromised by debris hitting it and making contact with the exhaust. Trunk mounts in general are pretty safe as there is no flimsy windshield washer reservoir to leak of have a cap pop off. Either way I'm getting a fire extinguisher just in case.
Appreciate 0
      01-14-2013, 01:35 PM   #7
robc1976
DIYER
robc1976's Avatar
613
Rep
5,521
Posts

Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (14)

Quote:
Originally Posted by Flava View Post
I'll likely be keeping it through the interior as its all one long piece and hidden under trim so I don't see the line being compromised. If anything is going to catch fire it'll likely be in the engine bay (as almost all fires we have heard of) where a connection leaks and the meth comes in contact with something hot. That or under the car if the line gets compromised by debris hitting it and making contact with the exhaust. Trunk mounts in general are pretty safe as there is no flimsy windshield washer reservoir to leak of have a cap pop off. Either way I'm getting a fire extinguisher just in case.
Your good, I have mine the same....extinguisher in back.
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
Appreciate 0
      01-15-2013, 02:06 PM   #8
NoQuarter
Captain
United_States
164
Rep
906
Posts

Drives: 2008 535xi / 2011 Z4 35Is
Join Date: Jan 2011
Location: Indiana

iTrader: (0)

Garage List
2018 BMW X2  [0.00]
2008 535xi  [0.00]
2011 Z4 35is  [0.00]
Don't know how to make video show up.

URL to funny:

http://www.youtube.com/watch?feature...&v=wxDqRy9bhtc

Last edited by NoQuarter; 01-15-2013 at 07:19 PM..
Appreciate 0
      01-15-2013, 02:45 PM   #9
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Only problem I see running it inside the cabin is if the meth line ruptured meth will spill into the wiring harnass under the carpet and also the fumes are not too healthy to inhale. Also a ruptured line there will be no way of knowing for awhile as the carpet would soak it up. Either way best to have it under the body panels.
Appreciate 0
      01-15-2013, 04:53 PM   #10
Flava
Private
3
Rep
69
Posts

Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

iTrader: (0)

Quote:
Originally Posted by NoQuarter
[u2b]http://www.youtube.com/watch?feature=player_embedded&v=74Obm6bEH80#t=37s[/u2b]

Don't know how to make video show up.
Try just posting the link as text? I'm curious lol
Appreciate 0
      01-15-2013, 07:17 PM   #11
NoQuarter
Captain
United_States
164
Rep
906
Posts

Drives: 2008 535xi / 2011 Z4 35Is
Join Date: Jan 2011
Location: Indiana

iTrader: (0)

Garage List
2018 BMW X2  [0.00]
2008 535xi  [0.00]
2011 Z4 35is  [0.00]
Quote:
Originally Posted by Flava View Post
Try just posting the link as text? I'm curious lol
Changed to show the URL. Not helpful at all... just a Ricky Bobby funny

Link was visible in full browser but in my mobile it was not usable at all ??
Appreciate 0
      01-15-2013, 09:43 PM   #12
Flava
Private
3
Rep
69
Posts

Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

iTrader: (0)

Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Appreciate 0
      01-15-2013, 11:50 PM   #13
robc1976
DIYER
robc1976's Avatar
613
Rep
5,521
Posts

Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (14)

Quote:
Originally Posted by Flava View Post
Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Awesome, I routed mine the same
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
Appreciate 0
      01-16-2013, 12:13 AM   #14
Flava
Private
3
Rep
69
Posts

Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

iTrader: (0)

Quote:
Originally Posted by robc1976
Quote:
Originally Posted by Flava View Post
Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Awesome, I routed mine the same
Thanks for your help!
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:37 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST