[revah2]

Originally Posted by stillclaimndp

For those who don't know, my unbiased opinion is that O-Cha is probably 18 years old and his seemingly endless posts should be taken with a grain of salt. I am pretty sure the 2.03 map was said to be released at the end of January or beginning of February so he piping propaganda again...

lol mAP 2.03? 2.04, 2.05?
How many times has shiv said He'd release a map that would address this problem and that problem within the coming weeks. Everytime a new problem occurs, he's "releasing a map".
Give me a break.
Your posts in this thread have been completely useless to everyone reading them, congratulations.

[remydlc]

Can you switch maps on the fly? sorry if I missed it

[Bimmer335i07]

Originally Posted by remydlc

Can you switch maps on the fly? sorry if I missed it

Yes!

Depending on where you install the switch.

[remydlc]

so it has an advantage over V2, where you need to rev up the engine on the first 2 seconds after you power the car on, if missed, you have to start the car again.

[MIAmE93 Heat]

nice

[remydlc]

Originally Posted by MIAmE93 Heat

nice

yes, nice girl in your avatar , Adriana Lima, right?

[ezatnova]

Originally Posted by remydlc

so it has an advantage over V2, where you need to rev up the engine on the first 2 seconds after you power the car on, if missed, you have to start the car again.

Or, as Shiv's pointed out, simply set the "on" parameter to something low like 600 rpm's and the car will hit it automatically on every startup.

[HyperM3]

Originally Posted by remydlc

so it has an advantage over V2, where you need to rev up the engine on the first 2 seconds after you power the car on, if missed, you have to start the car again.

Exactly. Its switchable on the fly. No need to get out and lock the hubs or restart the car.

[remydlc]

Originally Posted by ezatnova

Or, as Shiv's pointed out, simply set the "on" parameter to something low like 600 rpm's and the car will hit it automatically on every startup.

that defeat the point... for that you just set it at 0rpm to make things simple. the switch it's better because you can change maps on the fly . with v2 if you implement it, and forgot to rev it to activate the power map, you have to restart the car