[Teq]

I've get an aftermarket rear view camera with an emulator but it is completely unclear for me how to install this.

I see a red and a white input plug on the emulator but I only have one yellow cable to transport the image. How should everything be wired?

[Josh_G]

there is a really good thread with details of how to install the cam itself and a diffrent kind of emulator.

i have this emulator and it is an in and out type afair! conect the yellow phono lead to the red and then another phono lead to the correct pins on the quodlock and then white. took me ages to work this out when instaling mine as wasnt very clear at all!

did yours come with are harness for the quadlock or bare wires?

read though this and come back with any questions;
http://www.e90post.com/forums/showthread.php?t=1005301

[Teq]

Thank you for your reply

I now see that I'm missing a phone lead with 2 cables for connection on the cic,
Like this picture:


Where can I buy this or can I make it myself? I've enough of these cables:

[Josh_G]

Originally Posted by Teq

Thank you for your reply

I now see that I'm missing a phone lead with 2 cables for connection on the cic,
Like this picture:


Where can I buy this or can I make it myself? I've enough of these cables:

I took an old phono lead like ones above and cut and crimped it onto the harness extender/ quadlock that was supllied with the emulator.

it took me a couple of atemps to find the right pins on the quadlock but it is all working now.

also remeber that you need the cam to go into the emulator and then back out so make sure the phono lead you use is male

[Teq]

Thank you

[Josh_G]

Originally Posted by Teq

Thank you

let me know how you get on

[Teq]