[wheeladdicts]

Hello Everyone,

There has been a lot of demand for the ADV.1 wheel line, but the price of entry has been pretty steep keeping many out. So we sought out to fix this problem. After some convincing, on our end, we got Advance One to produce a cast line. We gave them some of the information that the BMW community has been asking for and they produce it.

So we have these exclusive fitments made for the BMW community.

The first wheel available will be the ADV5.1 as it has been the one in highest demand. Demanding on how this wheel does the 7.1 and 10.1 may be produced.

If anyone has suggestions and/or wants a specific offsets PM us. If it is a size/offset that is in high demand we can have it made.

The wheels will be about as concave as the Forged versions in 335 fitment. There is no way to go deeper with the cast alloy.

----------
-------------------------
-------------------------------------------------
-------------------------
----------

Some key points for everyone:

1. Load Rating: 1600lbs
2. Type of casting: Low pressure cast
3. Finish: Powdercoated
4. Certifications: TUV approved, ISO, SAE
5. TPMS Compatible
6. Hubcentric
7. Centercaps and Valve stems included

*The wheels are certified with ISO/TS 16949 (covers VDA 6.1). ISO/TS 16949 combines
all previous ISO, etc standards including the ones in Japan, and Germany. VDA is the German standard. They also have VIA Test Lab Certification and ISO 14000 certificate (for environmental). They are also tested to SAE standards and VIA standards as well, which in some cases, is much stricter.*




Available sizes/offsets:

19x8.5: 18, 35, 42, 50

19x10: 15, 25, 35

20x8.5: 18, 35

20x10: 15, 25, 35






Pre-Order Pricing:

19” $549 / Wheel REG: $599 / Wheel
20” $599 / Wheel REG: $649 / Wheel
22” $649 / Wheel REG: $699 / Wheel





Available Finishes:

Standard Powder Coated finishes:
Silver, Gloss Black, Satin Matte Black, Fine Textured Matte Black, Fine texture bronze, Gunmetal & Any1 stage color i.e., Red, White, Blue, etc.

2 tone finishes: $140 / wheel

Stripes: $140 / wheel

PPG color matched colors: $100 / wheel





Pre-Orders:

Delivery Date will be mid-April





Shipping:

$100 US / $150 CA / $350 International / $400 AU





We also have fitments for the following vehicles (some are ready to go and some are in production):

Corvette C5 / C6
Cadillac CTS-V (New and Old models)
Camaro (new model)
SRT8 Charger Magnum 300C
Dodge Challenger / Charger
Ford Mustang

Lexus GS
Lexus IS300 / 350 / IS-F
Infinity G35 / G37
Nissan 350Z / 370Z

BMW 335 / 3 series
BMW e46 / e92 / e36 M3
BMW 5 Series / 6 Series
Mercedes C63, C32, e55, and all non AMG models
Audi A4 / S4 / A3 / A5 / A6
Porsche 996 / 997 Narrow Body
Porsche Boxster / Cayman
Porsche Cayenne
VW (all newer models)





Terms of Deposit / Order:
Deposit is 100% refundable prior to wheel painting and machining (April) – 3% (Paypal or cc fees)
Once wheels arrive and production begins, the deposit is no longer refundable.
Minimum 50% deposit required to process order.

.
.
.
.
.
.

[ZJP]

Subscribed.

Just out of curiosity, what's the price gap from these to the forged 1pc?

[KWY91]

Interesting..

[wheeladdicts]

Lets get those tax returns put to good use!!!

[EuroTrip]

The wheels will be about as concave as the Forged versions in 335 fitment. There is no way to go deeper with the cast alloy.


This was added in in bright red as fine print. I am trying to understand its meaning. "The wheels will be about as" is it safe to say they arent? If so, how much less? The follow up "no way to go deeper" seems like the strength of this material will not support that type of concavity?


When I pmed you a month ago about a set of these, you quoted me $4600 for the set of forged. So these wheels are basically heavier and made of a lower quality material/production? A set of 19s would then be $2200? I would imagine these must be much less wheel to be half price. So they are reps then?

[wheeladdicts]

This was added in in bright red as fine print. I am trying to understand its meaning. "The wheels will be about as" is it safe to say they arent? If so, how much less? The follow up "no way to go deeper" seems like the strength of this material will not support that type of concavity?

I wrote that because they are not ready to go yet. I dont want to say they will be the same if I havent seen the actual wheel yet. Based off of what I have seen/been told they will be almost identical to the 335 Forged fitment.


When I pmed you a month ago about a set of these, you quoted me $4600 for the set of forged. So these wheels are basically heavier and made of a lower quality material/production? A set of 19s would then be $2200? I would imagine these must be much less wheel to be half price. So they are reps then?

As the title says these are made using a low pressure cast (same as AluFelgen, Miro, etc). This means more material will have to be used vs a forged wheel making them slightly heavier. They are basically a lower priced option for those that want the look of the ADV5.1 at the expense of added weight.

[Asclepius]

Damn I luv these wheels! I need to see final pics of these wheels. WHat I like most is how concave they are so I dont think Id go for this version....Looks like Ill just have to save up for the real thing...sigh

[wheeladdicts]

The cast and forged versions will have about the same "concavity" in a 3 series application. So if your main concern is how concave they are you will be happy with either.

[TSM330i]

These wheels are sweet looking. Good job!

[import36]

i like this wheel... a lot. for coming up with a lower priced alternative.

[SGxi]

Weight?

[wheeladdicts]

It will depend on what size, but expect the 19"x9 to be in 24lbs. They will be on par with the other low pressure cast wheels.

[wheeladdicts]

All pm's and emails returned.

[Bart@AUTOcouture]

Always loved these!

[wheeladdicts]

Bart I sent you an email yesterday...let me know if you got it.

[wheeladdicts]

One month out

[wheeladdicts]

all pm's replied to