E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > UK > UK Technical Forum > Wobbly when braking



Reply
 
Thread Tools Search this Thread
      06-11-2012, 04:58 AM   #1
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Wobbly when braking

Hello

I have a problem with my 2006 e91.

When I'm braking from speed, like when coming off a motorway onto a slip, I get a lot of vibration in the car and the steering wheel. It does do it when when braking at slower speeds as well but is not as noticeable.
If I slow to a crawl and brake I think I can feel it "pinching" periodically like a buckled wheel on a bicycle would do.

I read some posts on here and other forums suggesting pad deposits and warped discs. So I started by doing some brake cleansing by braking hard from high speed a few times as per a tutorial. This didn't fix it.

Since my OBC said my pads would need changing in a few thousand miles, I thought I'd replace all 4 pads and the discs on the front too. After doing this I followed a bedding in tutorial. This has also not helped the problem.

I have also changed the wheels (from winter to summer) which hasn't helped.

There is no wobbling etc whilst driving at any speed so I don't think it's a balance problem.

Any pointers at what to try next, or where I should be looking?

Thanks
Appreciate 0
      06-11-2012, 06:46 AM   #2
tmarshall57
Captain
tmarshall57's Avatar
United Kingdom
56
Rep
623
Posts

Drives: F10 530d M Sport, E87 118d M
Join Date: Apr 2008
Location: Bury, Lancs, UK

iTrader: (0)

Garage List
The hub to disc mating surface needs to be absolutely free of any rust or other contamination when replacing the discs. My guess is that the this is the source of the problem.

It could be warped discs if they are of poor quality or have been abused. I think that the only real answer is to check for run-out on each disc and either replace the discs on the axle concerned or, as a first pass, remove each discs and clean the mating surfaces until they are spotless.
__________________
F10 530d M Sport, September 2012 Individual Amazonite Silver, Oyster Dakota Leather, Auto, Nav Pro, Bluetooth + USB Devices, Expanded BMW Online, Comfort Seats, Sunroof, Sun Protection Glass Individual Satin Walnut Honey Brown Trim Interior Inside/Outside Mirror with folding and autodip, M Rear Spoiler
Appreciate 0
      06-11-2012, 06:50 AM   #3
Stringbag
Private First Class
United Kingdom
2
Rep
123
Posts

Drives: 335d touring
Join Date: May 2012
Location: uk - Bath

iTrader: (0)

Not sure if an e91 has thrust arm bushes - they were notorious on the E39 m5 for giving exactly the same thing. I replaced two sets.
Appreciate 0
      06-11-2012, 06:57 AM   #4
Stringbag
Private First Class
United Kingdom
2
Rep
123
Posts

Drives: 335d touring
Join Date: May 2012
Location: uk - Bath

iTrader: (0)

Just looked at the parts diagram - its reversed from the E39 but will have the same effect. They are basically wishbone bushes. No 10 in this diagram
here
Appreciate 0
      06-11-2012, 08:05 AM   #5
doughboy
Major General
doughboy's Avatar
1543
Rep
8,972
Posts

Drives: 2018 M2 Comp 6MT
Join Date: Jan 2009
Location: UK

iTrader: (2)

Other members here have reported excessive run out in the actual hub bearing assembly which manifested itself as brake wobble (not general running wobble despite the whole wheel being out)

This run out could appear after a curbing or pothole crash.

The replacement hub assemblies are fairly cheap (£100/pair for top end SKF parts) from europarts etc and quick to change, with just 4 bolts holding them in.

Part 5 here http://www.realoem.com/bmw/showparts...35&hg=31&fg=10

Last edited by doughboy; 06-11-2012 at 08:18 AM..
Appreciate 0
      06-11-2012, 08:25 AM   #6
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Thanks for the tips everyone. If we get some fair weather in the near future I'll take a look underneath.
Appreciate 0
      06-11-2012, 08:35 AM   #7
Stringbag
Private First Class
United Kingdom
2
Rep
123
Posts

Drives: 335d touring
Join Date: May 2012
Location: uk - Bath

iTrader: (0)

You won't know the bushes have gone by looking - need to get under it and try to wobble bits with a bar (a ramp job I suggest).
If i were you i'd book it in for someone to look at.
Appreciate 0
      06-11-2012, 02:17 PM   #8
bigandy
Enlisted Member
England
6
Rep
48
Posts

Drives: 2006 e92 335i
Join Date: Feb 2012
Location: Warwickshire

iTrader: (0)

If your bushes have gone you should also be able to feel the steering wheel 'pulling' over ridges in the road, solid white lines etc.
Appreciate 0
      06-11-2012, 02:28 PM   #9
B005T3D-G
Class Leading Reprobate
B005T3D-G's Avatar
Scotland
15
Rep
407
Posts

Drives: Impreza STi - E92 335i (56)
Join Date: Oct 2011
Location: Mintlaw, Scotland

iTrader: (0)

Garage List
How far are your discs and pads gone? Mine started doing exactly as you described about a week before I changed them all round and they were pretty much gone. Since the change all has been well.

Apologies but just a small

I'm interested in hearing more about the bushings as I have noticed mine starting to grab at camber changes and undulations but figure my geo may have gone out since changing the wheels. Something I'll be sorting once I get a new suspension setup.

Cheers
G
__________________
E92 335i | 6 Speed manual | BMS 4xLED Halo Bulbs | JB4 (waiting to be installed) | BMW Performance Gloss Black Grills | BMW Performance Exhaust | Smoked side Repeaters
Aero Front Lip | M3 Lip Spoiler |19" Cades Tyrus 'Gunmetal' with polished lips | Falken FK452 Rubber
........... More to come
Appreciate 0
      06-12-2012, 07:08 AM   #10
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Quote:
Originally Posted by bigandy View Post
If your bushes have gone you should also be able to feel the steering wheel 'pulling' over ridges in the road, solid white lines etc.
Now you mention it, I think it may do this a bit. I think I'll get it up on a ramp to take a look.

Quote:
Originally Posted by B005T3D-G View Post
How far are your discs and pads gone? Mine started doing exactly as you described about a week before I changed them all round and they were pretty much gone. Since the change all has been well.
A couple of thousand miles, if that. I just changed them. I thought that might be what the cause was originally which is partly why I replaced them.
Appreciate 0
      06-12-2012, 02:24 PM   #11
B005T3D-G
Class Leading Reprobate
B005T3D-G's Avatar
Scotland
15
Rep
407
Posts

Drives: Impreza STi - E92 335i (56)
Join Date: Oct 2011
Location: Mintlaw, Scotland

iTrader: (0)

Garage List
Quote:
Originally Posted by Sk00v View Post
A couple of thousand miles, if that. I just changed them. I thought that might be what the cause was originally which is partly why I replaced them.
Sounds like a different problem then. Definitely get your hub run out checked along with the bushes and report back as I may need to do my bushes by the sounds of things. Time to upgrade to M3 stuff me thinks
__________________
E92 335i | 6 Speed manual | BMS 4xLED Halo Bulbs | JB4 (waiting to be installed) | BMW Performance Gloss Black Grills | BMW Performance Exhaust | Smoked side Repeaters
Aero Front Lip | M3 Lip Spoiler |19" Cades Tyrus 'Gunmetal' with polished lips | Falken FK452 Rubber
........... More to come
Appreciate 0
      02-22-2013, 03:32 PM   #12
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Well, long overdue but thought I'd post the solution.... Changed the front discs again and lower control arms (as one failed the MOT). Still wobbled.

Finally decided to change the rear discs after two mechanics advised "it's DEFINATELY not rear disks"..... It was.
Appreciate 0
      06-02-2014, 08:05 AM   #13
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Sorry to dig up my old post, but thought I'd report back.

Quote:
Originally Posted by Sk00v View Post
Well, long overdue but thought I'd post the solution....
Turned out to be a temporary solution as the brake wobble came back..... swapped the discs AGAIN on the rear. Fixed...... came back a few months later. Had the discs machined on the car with a Procut lathe. Fixed. Now a few months on, it's back again!

I bought a dial gauge and it's the O/S rear that has the most runout, but only about 0.08mm compared to 0.02 on the N/S. I checked this before I had them machined.

There was no runout on the hubs that I could detect.

I stripped and wire-brushed the caliper to remove all the rust and greased all the moving parts last time I fitted new discs but could it be this??

The one positive I've had out of this, is from never changing brake parts before, I can now replace discs and pads in about 10 minutes per corner

I'm considering selling the car now as it's doing my nut!
Appreciate 0
      06-03-2014, 07:54 AM   #14
umut335i
Lieutenant
umut335i's Avatar
United Kingdom
28
Rep
407
Posts

Drives: 335i Convertible 2007
Join Date: May 2014
Location: Kent UK

iTrader: (0)

Hi Mate, Just read through your thread, I've got exactly the same thing, had my breaks changed all round twice. Apparently its because the car sits for long periods of time. What Bull****, i didnt spend all that money so that it messes up. I completely agree with the wanting to sell it part. Might don a break upgrade and see how it goes from there....
Appreciate 0
      06-03-2014, 08:46 AM   #15
Marshall878
First Lieutenant
Marshall878's Avatar
United Kingdom
16
Rep
346
Posts

Drives: 2009 E92 325D
Join Date: May 2014
Location: Cambridgeshire

iTrader: (0)

Out of interest, you arent greasing up the mating surfaces on the back of the discs are you? I know copper slipping the backs of the discs where it mates the hub is known for causing wheel wobble/brake judder issues...
Appreciate 0
      06-03-2014, 11:19 AM   #16
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Quote:
Originally Posted by umut335i View Post
I completely agree with the wanting to sell it part.
Yep - extremely annoying isn't it.


Quote:
Originally Posted by Marshall878 View Post
Out of interest, you arent greasing up the mating surfaces on the back of the discs are you? I know copper slipping the backs of the discs where it mates the hub is known for causing wheel wobble/brake judder issues...
As I've done it many times now I've done one set of discs with nothing, then another set with some engine oil on the hub (recommended by a mechanic friend to stop it rusting so quick) and it made no difference to the wobble either way. Thanks for the suggestion though - all very welcome!

Cheers
Appreciate 0
      06-03-2014, 11:24 AM   #17
umut335i
Lieutenant
umut335i's Avatar
United Kingdom
28
Rep
407
Posts

Drives: 335i Convertible 2007
Join Date: May 2014
Location: Kent UK

iTrader: (0)

do yours squeak at all?
Appreciate 0
      06-05-2014, 03:44 AM   #18
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Yes the do squeak a little bit, but only when braking. Is that what you meant?
Appreciate 0
      06-05-2014, 07:42 AM   #19
John320d
Lieutenant
John320d's Avatar
30
Rep
559
Posts

Drives: BMW 320d E93
Join Date: Dec 2009
Location: Manchester UK

iTrader: (0)

Have you spun the wheels with the car jacked up. Might just pinpoint the problem
Appreciate 0
      06-05-2014, 08:35 AM   #20
Sk00v
New Member
1
Rep
20
Posts

Drives: BMW 320d tourer
Join Date: Nov 2010
Location: UK

iTrader: (0)

Yep, they spin fine. It's only when the brakes are applied that they wobble.

I've even put it on axle stands and had the car 'moving' in 1st to see if i could see anything wrong
Appreciate 0
      06-05-2014, 11:44 AM   #21
John320d
Lieutenant
John320d's Avatar
30
Rep
559
Posts

Drives: BMW 320d E93
Join Date: Dec 2009
Location: Manchester UK

iTrader: (0)

I had a similar problem years ago on a new car after its first service. The problem was front wheel judder when braking. Different front pads were fitted and front discs were checked. Did not help. Softer front pads made no difference either. I traced the fault myself to oval rear brake drums caused by overadjusted handbrake at the first service. The excess heat caused by the rubbing shoe had distorted the drums. The shape of the drums then sent hydraulic pulses to the front brakes which were the more efficient disc brakes making everybody believe it was a front brake problem. I wonder if the same thing is happening here, ie a fault on the rear discs is being transmitted to the more efficient front brakes along the hydraulic lines.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:35 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST