Dyno Day near Flint, MI

NoGuru · 05-12-2017, 06:15 AM

I did this last year with my E46 and looks like we are going to do it agian this year. It's a lot of fun to do and hang out and talk about our cars.
Here is a link to the thread over at E46Fanatics, http://forum.e46fanatics.com/showthread.php?t=1125178

UMich_335i · 05-15-2017, 12:00 PM

I went last year as well. A bunch of cool guys but the shop is pretty rough.

NoGuru · 05-15-2017, 08:35 PM

Quote:

Originally Posted by UMich_335i

I went last year as well. A bunch of cool guys but the shop is pretty rough.

Hey man, I think I remember your ride!

I had the White E46 330CI and my girl with me.

Are you going to try and make it again this year?

UMich_335i · 05-18-2017, 10:56 AM

Yeah I definitely remember talking with you, met a lot of cool people that day. I most likely wont be up again, but if they end up settling on a day that works I might.

NoGuru · 05-18-2017, 12:10 PM

Quote:

Originally Posted by UMich_335i

Yeah I definitely remember talking with you, met a lot of cool people that day. I most likely wont be up again, but if they end up settling on a day that works I might.

I understand. Still hope to see you there.

NoGuru · 06-21-2017, 09:49 AM

It's locked down to August 12th

3 pulls = $60

Let me know if anyone can confirm going?

Whitbread · 07-19-2017, 09:28 PM

I'm in! Please let the dyno operator know I'm bringing a diesel so he can be properly set up. Hopefully should break 400whp/600wtq.

NoGuru · 07-20-2017, 08:27 AM

Quote:

Originally Posted by Whitbread

I'm in! Please let the dyno operator know I'm bringing a diesel so he can be properly set up. Hopefully should break 400whp/600wtq.

Cool, can't wait to see you there.

Last year we had a diesel so no issues there.

UMich_335i · 07-20-2017, 11:09 AM

We couldn't read torque numbers last year though because the RPMs were read off of our coil wires so that would have to get ironed out since diesel torque is the fun number.

Mik325tds · 07-20-2017, 11:35 AM

Exactly, we definitely want torque numbers. I felt it was on the expensive side for me last year just to see HP. But I'm in again this year if the guy promises to be able to read rpm for diesels.

NoGuru · 07-20-2017, 12:22 PM

Ahh that's right. Good thing some of you can remember that.

I think I will remove my Engine cover before I head there so I don't have to mess with pulling it off for the runs.

Whitbread · 08-01-2017, 03:32 PM

I was also one of the diesels there last year, it's much less smokey this year

.

I spoke with A&A today and they're going to try and get one of two options from DynoJet that will read rpm for gas and diesel without clipping onto ignition wires. Option A plugs into obd port reads data right from the can bus data stream. This is the option I'm pushing them for purchase at it will save time with any late model car regardless of what fuel it runs on. Just plug in and done. Option B hooks up to battery or cigarette plug and and has to potentiometer to adjust the rpm signal out.

Either way, we should have rpm for the 12th for oil burners

.

NoGuru · 08-02-2017, 04:43 AM

That's great news! Can't wait!

NoGuru · 08-11-2017, 01:07 PM

Tomorrow is the day. Get the cars ready!

Blaster400 · 08-12-2017, 10:55 AM

So I drove up to Flint today to check out Dyno Day. Got there around 10:30. Place was closed and no BMW's were there!!! Anyone know what happened???

Plus the shop looked very sketchy. I wouldn't have let them touch my car anyway.

What a wasted morning.

NoGuru · 08-12-2017, 05:55 PM

Quote:

Originally Posted by Blaster400

So I drove up to Flint today to check out Dyno Day. Got there around 10:30. Place was closed and no BMW's were there!!! Anyone know what happened???

Plus the shop looked very sketchy. I wouldn't have let them touch my car anyway.

What a wasted morning.

You were super late. We all did our runs and left about 10ish but since no one else was there we all went home.

Blaster400 · 08-12-2017, 10:20 PM

Quote:

Originally Posted by NoGuru

You were super late. We all did our runs and left about 10ish but since no one else was there we all went home.

10:30 is super late on a Saturday morning? In Flint? Not in the world I live in lol.

FB event said 9:00-1:00. Guess I should have called first. Sorry I missed seeing you guys.

NoGuru · 08-13-2017, 05:27 AM

Quote:

Originally Posted by Blaster400

10:30 is super late on a Saturday morning? In Flint? Not in the world I live in lol.

FB event said 9:00-1:00. Guess I should have called first. Sorry I missed seeing you guys.

Ryan and I talked about getting phones numbers since a lot of people didn't show this year.
We didn't want the Dyno guy sitting around just hoping we would get more cars and we only ran 5.
Man, I would like to see the numbers yours puts down!

UMich_335i · 08-14-2017, 10:43 AM

Quote:

Originally Posted by Blaster400

So I drove up to Flint today to check out Dyno Day. Got there around 10:30. Place was closed and no BMW's were there!!! Anyone know what happened???

Plus the shop looked very sketchy. I wouldn't have let them touch my car anyway.

What a wasted morning.

Saw your car at cars and coffee at the M1 Concourse last week Tim but didn't see you around it! The shop is very sketchy and I would like to see something like this done elsewhere in the future.

Blaster400 · 08-14-2017, 03:49 PM

Quote:

Originally Posted by UMich_335i

Saw your car at cars and coffee at the M1 Concourse last week Tim but didn't see you around it! The shop is very sketchy and I would like to see something like this done elsewhere in the future.

Too bad I missed seeng you at M1. I'll be at M1 again on 9/23 hopefully you'll be there too. So few BMW's at these events it would be great have a fellow E9X to hang with!

05-12-2017, 06:15 AM	#1
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Dyno Day near Flint, MI I did this last year with my E46 and looks like we are going to do it agian this year. It's a lot of fun to do and hang out and talk about our cars. Here is a link to the thread over at E46Fanatics, http://forum.e46fanatics.com/showthread.php?t=1125178 __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Tweet Quote

05-15-2017, 12:00 PM	#2
UMich_335i Lieutenant 25 Rep 414 Posts Drives: 2009 e90 335i Join Date: Aug 2013 Location: Atlanta, GA iTrader: (0) Garage List 2009 BMW 335i [0.00]	I went last year as well. A bunch of cool guys but the shop is pretty rough. __________________ 2009 e90 335i \| AT \| AG M590 \| Conti DW \| KW V1 \| Lux \| Akebono e50 PTF Protune \| Cobb FMIC \| aFe DCI \| VRSF DPs \| ER CP \| Tial BOV \| Alpina Flash \| Fuel-It Stg1 \| RB PCV \| Cobb Exhaust
	Appreciate 0 Quote

05-18-2017, 10:56 AM	#4
UMich_335i Lieutenant 25 Rep 414 Posts Drives: 2009 e90 335i Join Date: Aug 2013 Location: Atlanta, GA iTrader: (0) Garage List 2009 BMW 335i [0.00]	Yeah I definitely remember talking with you, met a lot of cool people that day. I most likely wont be up again, but if they end up settling on a day that works I might. __________________ 2009 e90 335i \| AT \| AG M590 \| Conti DW \| KW V1 \| Lux \| Akebono e50 PTF Protune \| Cobb FMIC \| aFe DCI \| VRSF DPs \| ER CP \| Tial BOV \| Alpina Flash \| Fuel-It Stg1 \| RB PCV \| Cobb Exhaust
	Appreciate 0 Quote

06-21-2017, 09:49 AM	#6
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	It's locked down to August 12th 3 pulls = $60 Let me know if anyone can confirm going? __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

07-19-2017, 09:28 PM	#7
Whitbread Banned 144 Rep 316 Posts Drives: 335D Join Date: Jun 2015 Location: Gaylord, MI iTrader: (0)	I'm in! Please let the dyno operator know I'm bringing a diesel so he can be properly set up. Hopefully should break 400whp/600wtq. Last edited by Whitbread; 07-20-2017 at 08:14 AM..
	Appreciate 0 Quote

07-20-2017, 11:09 AM	#9
UMich_335i Lieutenant 25 Rep 414 Posts Drives: 2009 e90 335i Join Date: Aug 2013 Location: Atlanta, GA iTrader: (0) Garage List 2009 BMW 335i [0.00]	We couldn't read torque numbers last year though because the RPMs were read off of our coil wires so that would have to get ironed out since diesel torque is the fun number. __________________ 2009 e90 335i \| AT \| AG M590 \| Conti DW \| KW V1 \| Lux \| Akebono e50 PTF Protune \| Cobb FMIC \| aFe DCI \| VRSF DPs \| ER CP \| Tial BOV \| Alpina Flash \| Fuel-It Stg1 \| RB PCV \| Cobb Exhaust
	Appreciate 0 Quote

07-20-2017, 11:35 AM	#10
Mik325tds Major 806 Rep 1,191 Posts Drives: 335d M-Sport Join Date: Jul 2014 Location: Greater Detroit iTrader: (0)	Exactly, we definitely want torque numbers. I felt it was on the expensive side for me last year just to see HP. But I'm in again this year if the guy promises to be able to read rpm for diesels.
	Appreciate 0 Quote

07-20-2017, 12:22 PM	#11
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Ahh that's right. Good thing some of you can remember that. I think I will remove my Engine cover before I head there so I don't have to mess with pulling it off for the runs. __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

08-01-2017, 03:32 PM	#12
Whitbread Banned 144 Rep 316 Posts Drives: 335D Join Date: Jun 2015 Location: Gaylord, MI iTrader: (0)	I was also one of the diesels there last year, it's much less smokey this year . I spoke with A&A today and they're going to try and get one of two options from DynoJet that will read rpm for gas and diesel without clipping onto ignition wires. Option A plugs into obd port reads data right from the can bus data stream. This is the option I'm pushing them for purchase at it will save time with any late model car regardless of what fuel it runs on. Just plug in and done. Option B hooks up to battery or cigarette plug and and has to potentiometer to adjust the rpm signal out. Either way, we should have rpm for the 12th for oil burners .
	Appreciate 1 feuer4275.50 Quote

08-02-2017, 04:43 AM	#13
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	That's great news! Can't wait! __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

08-11-2017, 01:07 PM	#14
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Tomorrow is the day. Get the cars ready! __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

08-12-2017, 10:55 AM	#15
Blaster400 Captain 127 Rep 865 Posts Drives: BMW X3 35i, Porsche Macan S Join Date: Jul 2012 Location: Scottsdale AZ iTrader: (3) Garage List 2018 Porsche Macan S [0.00] 2012 BMW X3 35i [0.00]	So I drove up to Flint today to check out Dyno Day. Got there around 10:30. Place was closed and no BMW's were there!!! Anyone know what happened??? Plus the shop looked very sketchy. I wouldn't have let them touch my car anyway. What a wasted morning. __________________ MOTIV 750 ST \| MOTIV PI \| 100% E85 \| Fuel-it Stage 4 LPFP \| MOTIV Boost Box + MHD Protune \| Quaife \| Öhlins \| Brembo \| Akrapovic
	Appreciate 0 Quote