vrsf downpipes on! (videos inside)

amill411 · 05-14-2012, 08:30 PM

Finally finished installing my VRSF downpipes today. Install was somewhat difficult but nothing ridiculous. I did however snap one of the clamps that hold the downpipes to the turbo in half. I would recommend spraying these with PB Blaster before removal to avoid damage.

The pipes are coupled with Top Speed exhaust (eBay brand). I was expecting it to be much raspier and not too pleasant but it has a nice tone too it. I may even swap out the mufflers for something nicer.

Let me know what you guys think. This setup for full exhaust ran me about $700.

In the video it sounds like theres a rattle, but it's really just the crappy microphone on my camera.

First gear and a little bit of second with DTC on.

Messing around under a bridge (sounds SUPER loud haha)

woptang22 · 05-14-2012, 09:09 PM

Sounds good. I had the VRSF DPs on for a few weeks now. Yours doesnt sound nearly as raspy as mine. I have a turner motorsports catback. But I like the sound. Congrats on the DPs. Your car sounds awsome.

MrRager · 05-14-2012, 09:54 PM

top speed is a good company and do alot for the car community in the DFW in which they are based. They have affordable exhausts but also have a legitimate shop instead of being just an 'ebay' company

amill411 · 05-14-2012, 10:28 PM

Quote:

Originally Posted by MrRager

top speed is a good company and do alot for the car community in the DFW in which they are based. They have affordable exhausts but also have a legitimate shop instead of being just an 'ebay' company

Oh I wasn't aware of that. What's DFW by the way?

jdhart · 05-14-2012, 10:57 PM

Quote:

Originally Posted by amill411

Oh I wasn't aware of that. What's DFW by the way?

Dallas Fort Worth

Redrkt503 · 05-15-2012, 04:45 AM

I have the same exact setup and also snapped a clamp lol...love it except for my damn wastegate rattle which makes the car sound like its holding nuts and bolts in the exhaust....need to address that lol!

secretsquirrel · 05-15-2012, 07:40 AM

That sounds good. How is the drone?

Bme30 · 05-15-2012, 07:54 AM

Quote:

Originally Posted by zanelefko

I have the same exact setup and also snapped a clamp lol...love it except for my damn wastegate rattle which makes the car sound like its holding nuts and bolts in the exhaust....need to address that lol!

If that isn't the effin truth!

amill411 · 05-15-2012, 08:30 AM

Quote:

Originally Posted by secretsquirrel

That sounds good. How is the drone?

Noticeable but not to an extreme. It really doesn't sound much different than with the exhaust by itself, just more turbo whine really.

secretsquirrel · 05-15-2012, 10:18 AM

Quote:

Originally Posted by amill411

Noticeable but not to an extreme. It really doesn't sound much different than with the exhaust by itself, just more turbo whine really.

Thanks.

Redrkt503 · 05-15-2012, 11:05 AM

Quote:

Originally Posted by Bme30

If that isn't the effin truth!

I hate it lol, Vishnu or ASR turbos in my future

E90Company · 05-15-2012, 11:27 AM

Car sounds really good, congrats on the DP's

05-14-2012, 08:30 PM	#1
amill411 Second Lieutenant 15 Rep 294 Posts Drives: 2008 335i E92 Join Date: Jul 2011 Location: Tampa, Florida iTrader: (0)	vrsf downpipes on! (videos inside) Finally finished installing my VRSF downpipes today. Install was somewhat difficult but nothing ridiculous. I did however snap one of the clamps that hold the downpipes to the turbo in half. I would recommend spraying these with PB Blaster before removal to avoid damage. The pipes are coupled with Top Speed exhaust (eBay brand). I was expecting it to be much raspier and not too pleasant but it has a nice tone too it. I may even swap out the mufflers for something nicer. Let me know what you guys think. This setup for full exhaust ran me about $700. In the video it sounds like theres a rattle, but it's really just the crappy microphone on my camera. First gear and a little bit of second with DTC on. Messing around under a bridge (sounds SUPER loud haha) __________________ JB4 and other stuff
	Appreciate 0 Tweet Quote

05-14-2012, 09:09 PM	#2
woptang22 Major 169 Rep 1,247 Posts Drives: 2009 E92 BMW M3 Join Date: Nov 2011 Location: Bristol Pa iTrader: (1)	Sounds good. I had the VRSF DPs on for a few weeks now. Yours doesnt sound nearly as raspy as mine. I have a turner motorsports catback. But I like the sound. Congrats on the DPs. Your car sounds awsome. __________________ 2009 E92 BMW M3.
	Appreciate 0 Quote

05-14-2012, 09:54 PM	#3
MrRager First Lieutenant 19 Rep 381 Posts Drives: 335i Join Date: Jul 2011 Location: 73134 iTrader: (0)	top speed is a good company and do alot for the car community in the DFW in which they are based. They have affordable exhausts but also have a legitimate shop instead of being just an 'ebay' company __________________ 2008 335i 6MT
	Appreciate 0 Quote

05-15-2012, 04:45 AM	#6
Redrkt503 Lieutenant 31 Rep 439 Posts Drives: E92 335is Join Date: Jan 2012 Location: Ft. Lauderdale, FL iTrader: (0)	I have the same exact setup and also snapped a clamp lol...love it except for my damn wastegate rattle which makes the car sound like its holding nuts and bolts in the exhaust....need to address that lol! __________________ 2011 335is "Redrkt" 6 MT DocRace 6266 Single Turbo - Fuel it stage 3 LPFP - Fuel it PI - spec stage 3+ clutch - mfactory SM flywheel - 100% E85 - VRSF 7.5" intercooler - VRSF charge pipe w/ HKS BOV - JB4 - MHD back end flash 768 whp 695 ft lbs - E85 - 32PSI
	Appreciate 0 Quote

05-15-2012, 07:40 AM	#7
secretsquirrel Colonel 130 Rep 2,291 Posts Drives: f80 Join Date: Dec 2010 Location: Far North Dallas iTrader: (2)	That sounds good. How is the drone?
	Appreciate 0 Quote

05-15-2012, 11:27 AM	#12
E90Company Major General 194 Rep 6,136 Posts Drives: Car Join Date: Mar 2012 Location: FL iTrader: (2)	Car sounds really good, congrats on the DP's
	Appreciate 0 Quote