|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
What needs to be modified on 328i LOWER MESH grill to fit on 335i...
|
|
07-24-2008, 12:58 AM | #1 |
ig: jeffersonho
148
Rep 2,182
Posts |
What needs to be modified on 328i LOWER MESH grill to fit on 335i...
AS TOPIC STATES....
If i was to get 328i black mesh grills from TISCHER, what needs to be modified for it to fit with the oil cooler?
__________________
|
05-10-2009, 01:39 AM | #5 |
Major General
375
Rep 7,076
Posts |
there is a thing blocking on the passager side mesh grill for 328
but the 335i is freely open to let the air get into the oil cooler i have seen ppl drill holes thru the black thing to let the air flow into the oilcooler |
Appreciate
0
|
05-10-2009, 01:39 AM | #6 |
Major
30
Rep 1,451
Posts |
Yup, you can dremmel it out, or just drill some holes. So long as there's enough air going through, you should be good.
__________________
Giggity, Giggity Goo! |
Appreciate
0
|
05-10-2009, 01:40 AM | #7 |
Major
30
Rep 1,451
Posts |
-1. Nope, you're wrong... modifications are definitely needed.
__________________
Giggity, Giggity Goo! |
Appreciate
0
|
05-10-2009, 05:03 PM | #8 |
Enlisted Member
4
Rep 32
Posts |
|
Appreciate
0
|
05-10-2009, 06:41 PM | #10 |
Major
30
Rep 1,451
Posts |
passenger
__________________
Giggity, Giggity Goo! |
Appreciate
0
|
05-10-2009, 07:45 PM | #11 |
Captain
24
Rep 648
Posts |
|
Appreciate
0
|
05-15-2009, 11:28 PM | #13 |
Major General
361
Rep 5,873
Posts
Drives: m
Join Date: Nov 2008
Location: usa
|
I swapped mine out from the 328. No mods needed unless you have an oil cooler then drill some holes for air.
__________________
|
Appreciate
0
|
05-16-2009, 09:34 AM | #15 |
441
Rep 18,331
Posts |
IMO painted the ones on the car is a better option...PITA to take off the bumper especially if you have cold weather package....My paint has held up perfectly with no chips in them, make sure you buy paint for plastics and apply many many coats!
|
Appreciate
0
|
Bookmarks |
|
|