[Mflip335]

HI Guys,

So Ive thrown a p0206 code indicating that I have a missfire on cylinder 6 relating to an injector issue. Im thinking about doing the work myself but found that coding is necessary. Does anyone on here happen to have done this before and can help me out? As in, having thr software and cable in hand?

Also, with these injectors, is it necessary to change 3 in one bank, or can i just pull out the old injector and swap the new one in? My impressions from doing the search showed that injector numbers in one bank should match, but wasnt so sure.

[The1ontop]

You need to either find older index injectors wich can be replaced one by one or you need to do 3 and 3 each bank I recomend to just swap all 6 now cause it's only a matter of time before others go out and you need inpa software and cable to code them. I can swap them and code for you pm me if intrested

[Mflip335]

Originally Posted by The1ontop

You need to either find older index injectors wich can be replaced one by one or you need to do 3 and 3 each bank I recomend to just swap all 6 now cause it's only a matter of time before others go out and you need inpa software and cable to code them. I can swap them and code for you pm me if intrested

Pmed