|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Alpine Retro Fit speaker upgrade problem
|
|
09-30-2012, 03:24 PM | #1 |
Private
3
Rep 58
Posts |
Alpine Retro Fit speaker upgrade problem
Hi all, I have been having problems with my alpine retro fit speaker upgrade.
The left hand side Mid speaker keeps cutting out, randomly, and i have noticed that my underseat speaker on the right hand side has completly stopped working. Has anyone else had these problems? or any ideas on fault finding the problem? Thanks in advance
__________________
[SIGPIC]
|
09-30-2012, 03:59 PM | #2 |
Captain
157
Rep 714
Posts |
I have the alpine kit and I did not experience any problems.
With the wiring diagram of your kit, it should be possible to bypass the amplifier in the trunk (boot) and drive the speakers directly from the radio to diagnose the problem. To do this you will have to make a custom jumper/pins connector. This is not too difficult if you are handy. It is easier than pulling out the Alpine kit from the car. It should be easy to test one speaker at a time. This will allow to isolate the problem. Is it the amplifier, wiring or speaker? Note: To do this test, the amplifier need to be removed and disconnnect the +12V fuse in the kit wiring. |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|