|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
ADVAN meth kit
|
|
02-25-2013, 04:34 PM | #1 |
160
Rep 1,460
Posts |
ADVAN meth kit
Hi all,
We are pleased to offer a complete meth kit to suite N54/N55 powered 135-335 BMW vechiles The Advan meth kit consists of, One of our custom under boot floor stealth meth tanks. Earls Dash 4 braided line kit and fittings, plumbed from tank to pump and from pump to PWM. ER Charge pipe, Fitted with TIAL valve and two methanol bungs. Vishnu Meth kit. Labour for fitting and dyno tuning of methanol sytem. Supply Methanol/water mix (20Litres) of 70/30 methanol mix. Total price including, all parts listed and labour is $3455 inclusive of GST. Price Break Down -Advan race meth tank blank anodized $800 -Earls Braided hose and fittings including anti vibration sleeve $350 -Vishnu Meth kit $795 -ER Charge pipe with TAIL valve and two meth bungs $680 -20l meth mixed 70/30 $30 including container -Labour, dyno time,shipping and workshop supplys $800 We will no longer be fitting Plastic meth tank systems/ washer bottle kits due to recent failures, leaks, fractured washer bottles etc. The way we have designed this kit is to give the vechile owener a discrete and functional system at a fixed price, with the confidence of knowing that this kit has been designed to offer maxium safety of your vechile and its occupants. Ways that we have acheived this are, Custom fabricated meth tank, that is constructed from 3mm alloy sheet, it is then fitted with a Aero flush filler cap, then it is anodized to seal the alloy from risk of corosion from the methanol used in the system, we then mount the tank in the boot cavity underneth the boot floor. To plumb the system we use EARLS teflon braided line and steel fittings (we do not used plastic hose or push lock fitings) this braided line is commonly used in brake systems with pressures in excess of 2500psi, its teflon inner lining is protected by its stainless outer braiding giving you the safest and longest lastesing way to plumb meth in your vechile.There is also a servicable filter fitted between the tank and the pump to ensure any debries doesnt enter the pump or PMW system. The meth pump is discretly mounted in the rear of the vechile. Once the system is fully installed, it is tuned on our dyno to full load conditions to ensure the system is operating safely and delivering maxium performance. Please feel free to contact the team at ADVAN performance www.advanperformanceeuro.com.au or on (02)96483366 between 8am-5.30pm monday to friday |
02-25-2013, 06:53 PM | #3 |
160
Rep 1,460
Posts |
|
Appreciate
0
|
Bookmarks |
|
|