[polaris_tr]

Hello guys;

My CAR is 2006 E90 without i-drive.Last week battery empty and lost the AUX from cd player menu.I can't use AUX IN now.How can I active it by the NCS? Please help me....

Thanks....

[cryptomit]

You can active this using INPA or Tool32.

INPA is the easiest way to do it I think, you need to go into RADIO and just reset radio,it should show up.

[polaris_tr]

Originally Posted by cryptomit

You can active this using INPA or Tool32.

INPA is the easiest way to do it I think, you need to go into RADIO and just reset radio,it should show up.

Thanks for reply.You can see result from here:http://www.e90post.com/forums/showthread.php?t=996249

[MoneyFor]

Hello,

My car is just updated by BMW and i lost all my programming, now my psdzdaten seems not to be working anymore. The I Level of the car is now F020-14-03-503, can someone point me in the directon of the latest psdzdaten that i need for this I Level please

rgrds Kris

[cryptomit]

You need at least 52.1

[MoneyFor]

Thanks, any download link for it ?

[hailpersia]

I would greatly appreciate it if anyone could help me out here.

I have downloaded and installed STD-tools 2.12 and have set up my dcan cable and loaded sp-daten 50.2 into winkfp, then flashed the ALIPINA B3 TCU flash with no problem. However now my paddle shifters do not work so i am going to follow the instructions to fix it via NCS-EXPERT.

The issue is, i am so confused on how to set up INPA, NCS and everything else beside what i mentioned above. I've done alot of research but i am so confused because of all the information and different setup DIYs here. can you pls help?

i'd like to set everything else up, i have them all installed but i know there are some configuration steps to do.

thanks.

[MoneyFor]

Installed the latest ESys and PSdZDate 52.3, everything working fine and the coding is done ( again )

[MoneyFor]

Hi all,

In my previous coding i had the code for turning off the radio when opening the driver door, cant find it anymore. Anybody know where i can code this please. ( I have à F31 chassis. )

Another problem is that i coded a gong when you put the car in reverse, it's a option for Japan or China but i cant find it anymore ( it's anoing sound everytime i drive in reverse ). Is there someone who nows where i can disable the code of this ?

Those are the 2 things i need to sorted out and the car is back in the state before BMW put the new software on it

best regards Kris

[MoneyFor]

Radio off = solved ( FEM_BODY 3020 TcMaster TCM_R_LOGIC_OFF DOOR ) but still didn't find that anoing gong to shut up. Appriciate the help where to find the code for it.
Gong = solved

[youradhere]

Anyone tried/succeeded in increasing the allowable % difference in wheel speed before ABS activates?

[Dark_Knight_335]

Nice job man- so have you tried your hand at the Alpina trans flash yet?

[vanondemand]

anyone have the latest NCS/inpa they can send me? the ncs.rar file is unavailable.

[Teq]

Hi,

I've installed a frm3 into my E90 from 2006 which has comfort access.
I would like that all the interior lights are on when the car is unlocked inc. comfort access but not the interior lighting on the console in the roof.
Also when you exit the car the lights (inside and outside) inc. interior lights on the roof console should stay on for 30 seconds after the car has been locked. (coming home)

I did found this but not sure:
HEIMLEUCHTEN_FUNKSCHL
HEIMLEUCHTEN_KL58G : home lights are interior backlighting, cluster, ashtray etc.

Is it possible that the rain sensor is always active? Now is after starting the car I have to push the button every time.

[todor]

OP, thanks very much for the info. I have successfully coded some settings on my E46. One thing I'm still not clear about is whether it's necessary to switch "daten" files every time you work with a different model car. It seems like my INPA is set up for E90s, but also works with E46, E70, etc. - the ones that show up on the main menu. Is there a way to have an INPA / NCS setup that works with all E chassis? (I've heard that the F chassis are not compatible with INPA).

[zigsman]

Anyone in the Phoenix/east valley area willing to come out and help with programming my junction box? I cant get it to respond to NFS, or KFP. I have ISTA as well, but I can't seem to get that to work. I'm still working on getting it to work with Progman. No luck so far...

[Frenk]

Originally Posted by mark19uk

Are you wanting them to double blink when indicating? Because that is a different thing altogether.
DOPPELBLINKIMPULS_WARNBLK will only change the blinking when the hazards are activated, general signalling stays the same.

how would you enable the double blink when signaling ? thanks

[xxxjecxxx]

Hello ladies!

I am the OP.

I will upload new files updated with Daten V49 soon.

[Frenk]

anybody knows how to do this ?

[xxxjecxxx]

NCS Expert with password hack, profiles made, updated daten to v49
INPA - needs scripts
Edibas - updated V49
WinKPF - updated V49 (Files for alpina flash only)

Consider this a temporally download location as dropbox will exceed bandwidth very fast...

https://app.box.com/s/wdfomep57ym6bspi8kh8

After you have installed BMW standard tools, got your drivers for the cable installed.. just copy the files I provided above with the ones that BMW standard tools installed.

BMW Standard Tools

https://app.box.com/s/nxer9j96a8spj0i3r9dk

[850CSi]

Question: does anyone have any experience working with Daten files of multiple vehicles? Like how does one go about importing both E60 and E89 daten?

[Maniac0908]

does nyone have the diy guide? or know where i can find one. or a video