[kris1973]

mail, please

[alexxx123]

Rheingold 3,41 look at rutracker

[kris1973]

link or torrent, please, 3.41 with crack, licence ???

[Sensible_]

Originally Posted by nate5ks

I saw the option for coding/programming so I would guess that somehow it could be enabled. The programming data isn't there though so I figure it would need to be added from DATEN versions obtained elsewhere.

Rheingold is just ISTA D v3.XX forming part of soon to released 'ISPI next'.

Hopefully next few days I'll make an lightweight ISID VM with ISTA D latest Rheingold and ISTA P. I just need to find time.

[kris1973]

Does anyone have a description of the settings of icom clone BMW Rheingold? You can insert it here?
Rheingold 3.41 with licence... https://mega.co.nz/#!E8tXHa7R!WJHUmZ...TT6Oc9To-Uqpsw

[808AWD325xi]

Originally Posted by kris1973

Does anyone have a description of the settings of icom clone BMW Rheingold? You can insert it here?
Rheingold 3.41 with licence... https://mega.co.nz/#!E8tXHa7R!WJHUmZ...TT6Oc9To-Uqpsw

Found this PDF of how to setup ICOM for 3.39. Don't know if it works as I don't have an ICOM:
http://www.agson.net/images/bmw/bmw_....agson.net.pdf

English translation:

1. Connect the car through the ICOM to the computer.

2. Open the properties used to connect the adapter and go to properties "Internet Protocol Version 4 (TCP/IPv4)". Enter 169.254.1.1 for the "IP address" and 255.255.0.0 for the "Subnet mask".

3. If you have installed VMware, run the Virtual Network Editor and disconnect all host adapters with Subnet Address 169.254.0.0.

4. Open the C: \ EDIABAS \ BIN \ EDIABAS.INI in Notepad and check that section TCP "Port = 6801."

5. Run BMW Rheingold ISTA 3 and wait for the download, click settings.

6. In the opened window, tab "VCI Config", select "HO-ICOM/ENET local and ISIS network "and confirm with" OK ".

7. Select the "Identification", then "Read Out Vehicle Data" and "Start Vehicle Test".

8. Select your ICOM from the list and click "Set up connection"

[kris1973]

Thank you, I saw it on the Russian side ...

[kris1973]

Originally Posted by alexopth1512

Downloaded too 180GB image.
License and functionality OK
So I can use directly OPPS without any emulator?

PS: I have ISIS older server from 2011, I would greatly appreciate if any1 could PM me links to download installation media ISPI/ISIS for new versions

This is the version on the VM? There is a Polish (Polski) language to choose?

[alexopth1512]

The 180 GB has Polish language. I downloaded from russian torrent site.
It is Sensible build I guess.
Version of 180 GB VMware image is 3.39 and ISTA/P 2.50.4
If you are talking for my own ISIS+ISID+ISSS VMware system is rather old, it is ISIS 2.7.190

[kris1973]

I have the 180GB version on vm and unfortunately there is not Polish, you can give a link to the version of Polish?

[alexopth1512]

Yes it has polish

[kris1973]

I have this version but there is no description of the Polish repairs. It is only the menus and programming. and so the rest is in English.

[alexopth1512]

Weird, I looked my ~1 TB version of ISIS - ISID -ISSS. And ISID has no Polish technical bulletins etc. language. It has other languages but not Polish... sorry mate.

[ynguldyn]

ISTA/P 2.51.3 - same place as Rheingold.

[floydturbo]

Can Gini's dcan snapshot be pasted into Sensibles image with icon built in? I don't have a usb dongle.

[cryptomit]

Originally Posted by kris1973

Does anyone have a description of the settings of icom clone BMW Rheingold? You can insert it here?
Rheingold 3.41 with licence... https://mega.co.nz/#!E8tXHa7R!WJHUmZ...TT6Oc9To-Uqpsw

this link doesn't work, would you re-share this?

[terahertz]

Originally Posted by cryptomit

this link doesn't work, would you re-share this?

Ditto!

[kris1973]

link was not mine so I have no influence on whether the work is a lot of links on different servers just search on google under the banner of BMW Rheingold 3.41

[floydturbo]

I can find the icon connector and link to it but it does not read out the VIN. When I run the k+dcan utility I get an error:answer mismatch. Any ideas? I am using Sensibles image with built in icon emulator and using a real hp dongle. I am using a one stop dcan cable.

[Tichx]

Originally Posted by floydturbo

I can find the icon connector and link to it but it does not read out the VIN. When I run the k+dcan utility I get an error:answer mismatch. Any ideas? I am using Sensibles image with built in icon emulator and using a real hp dongle. I am using a one stop dcan cable.

same here, I'm using Sensible's VM with ICOM Emulator, created a HP Dongle and am using K+DCAN cable...

only can find ICOM connector, what are we doing wrong?

much appreciated to the experts! ;-)

so close to getting this working!

cheers.

[Augster]

So I read through this entire thread (thankfully, not very large... yet).

As I'm still having problems trying to get a fully functioning BMW Tools 2.12 to work under my Win7 x64 (I can get NCS Expert to work, but then INPA is kiboshed; if I stick to INPA 5.02/4, then of course NCS Expert doesn't work under x64; I'm currently still using an old laptop running WinXP to use INPA 5.0.2), since there is no slick step-by-step DIY for both what hardware is needed, fully working copes of the latest software (the Russian 3.39 link doesn't appear to work as my torrent client times out trying to access it, and I'm not sure if the first link in the OP is still good as it appears to be a much older version), and finally, a couple people have suggested it's much better and relatively affordable to buy a fully assembled system, say from eBay.

If purchasing a pre-installed system, is there anyone that has been verified as trustworthy and offers a complete turn-key system that truly works?

Or should I continue to try and scrounge up sources for functioning copies of ISTA, emulators, cables, and who knows what else I may need, hoping for nirvana but perhaps again falling short and just never quite there?

[dwells]

Originally Posted by Augster

As I'm still having problems trying to get a fully functioning BMW Tools 2.12 to work under my Win7 x64 (I can get NCS Expert to work, but then INPA is kiboshed; if I stick to INPA 5.02/4, then of course NCS Expert doesn't work under x64; I'm currently still using an old laptop running WinXP to use INPA 5.0.2),

Copy the CFGDAT and SGDAT files from your INPA 5.0.2 install on your other laptop, and drop them in to the new one once you install BMW Standard Tools 2.12. Don't support the people selling pirated software, never pay for any of this stuff.

There's a guide in this section for Windows 7 x86 that should be applicable for the most part to your x64 build which covers installing and configuring Standard Tools 2.12, as well as importing the necessary data from INPA 5.0.2.

Also, I strongly recommend either having a dedicated system for coding/diagnostics or a virtual machine. I wouldn't advise mixing all this stuff in with your normal software and files for performance and security reasons.