E90Post
 


Extreme Powerhouse
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > AUDIO/VIDEO + BLUETOOTH + Electronics/Alarm/Software > Helix Match PP 82DSP installed



Reply
 
Thread Tools Search this Thread
      11-07-2014, 09:42 AM   #89
mathematics
Captain
mathematics's Avatar
United_States
69
Rep
994
Posts

Drives: 08 328i e93 alpine white
Join Date: May 2009
Location: Queens, NY

iTrader: (0)

use the pre-amp output of the DSP to drive the JL amp. that would be your G/H channel on the DSP.

Quote:
Originally Posted by birdcatcher View Post
Any suggestions on how I can use/ wire my PP82DSP + JL 500/3 amplifier!
__________________
iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
Appreciate 0
      11-07-2014, 10:55 AM   #90
Wongway
Captain
28
Rep
609
Posts

Drives: 328i xdrive
Join Date: Sep 2013
Location: Pittsburgh, PA

iTrader: (0)

Quote:
Originally Posted by mathematics View Post
use the pre-amp output of the DSP to drive the JL amp. that would be your G/H channel on the DSP.
I never had a desire to wire this way, so I'm not clear on this:
I could be wrong, based on misreading the information, but is the pre-amp output of the PP82DSP the G/H channel? Or E/F/G/H?
Appreciate 0
      11-07-2014, 10:56 AM   #91
mathematics
Captain
mathematics's Avatar
United_States
69
Rep
994
Posts

Drives: 08 328i e93 alpine white
Join Date: May 2009
Location: Queens, NY

iTrader: (0)

just G/H

Quote:
Originally Posted by Wongway View Post
I never had a desire to wire this way, so I'm not clear on this:
I could be wrong, based on misreading the information, but is the pre-amp output of the PP82DSP the G/H channel? Or E/F/G/H?
__________________
iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
Appreciate 0
      11-08-2014, 11:23 AM   #92
birdcatcher
Private First Class
United_States
12
Rep
106
Posts

Drives: '13 X5 35ixDrive E70
Join Date: Jul 2014
Location: NVA

iTrader: (0)

Quote:
Originally Posted by mathematics View Post
use the pre-amp output of the DSP to drive the JL amp. that would be your G/H channel on the DSP.
That brings me to my original question, can i use just channel "H" pre-amp output of the DSP as an RCA input for the JL 500/3 amp (using a Y-connector to give signal to all 3 channels). That will be mono and if i use channel 1-2 of the JL for the underseat woofers, will the mono signal affect the mid bass (between 50Hz - 200Hz)?
Appreciate 0
      11-09-2014, 08:38 PM   #93
drewchris18
Registered
Canada
2
Rep
3
Posts

Drives: bmw e90
Join Date: Sep 2014
Location: toronto

iTrader: (0)

can anyone advise as to the best way
to install a helix dsp to oem head unit
bmw e90 hifi
hopefully from the trunk so that i don't have to mess with head unit in dash

crutchfield recommends the helix HELIX PP-AC13A and Helix EPC5
Appreciate 0
      11-09-2014, 08:47 PM   #94
ctuna
Lieutenant General
1904
Rep
13,088
Posts

Drives: 325xi 06 wagon MT
Join Date: Jan 2010
Location: Santa Cruz, Ca

iTrader: (0)

It should replace the OEM Hi Fi Amp

It should replace the OEM Hi Fi Amp(the helix unit)
Most people here would do it with a Technic Harness that
plugs in right where the old amp is plugged in.
You wouldn't have to run wires the length of the car unless you
wanted a center and only for the center . But you would not get the Helix direct plugs.
Technic is currently adding a center channel with these if you
go back further in the thread.

Looks like the Helix Harness is a compete new harness from the radio to the trunk .

Last edited by ctuna; 11-09-2014 at 09:12 PM..
Appreciate 0
      11-17-2014, 01:41 PM   #95
birdcatcher
Private First Class
United_States
12
Rep
106
Posts

Drives: '13 X5 35ixDrive E70
Join Date: Jul 2014
Location: NVA

iTrader: (0)

Something for the Guru's to try and experiment…

Check out the link -

http://www.soundonsound.com/sos/oct0.../stereomix.htm

Appreciate 0
      12-09-2014, 03:30 PM   #96
Jedclampet
Private First Class
2
Rep
109
Posts

Drives: 2011 X3 Black
Join Date: Apr 2010
Location: Northern Jersey

iTrader: (0)

G and H

I have used the G and H outputs to run my JL Audio sub powered by a Kenwood amp. It works flawless with the software Audiotec provides too.
__________________
2010 135i Champagne Silver
Appreciate 0
      12-11-2014, 08:07 AM   #97
Jedclampet
Private First Class
2
Rep
109
Posts

Drives: 2011 X3 Black
Join Date: Apr 2010
Location: Northern Jersey

iTrader: (0)

Match Software

Question regarding channels E n F on these channel's only my equalizer allows for every other frequency band of adjustment is this something that I could correct? My settings are as follows channel's A n B Tweeters, C n D Midrange, E n F Mid bass ( under seats ) and G n H sub. Other than the sub all drivers are in the front and my input is the front right and left out of the stock head unit. All channel's are set as full signal from front left or right output except G n H which are set as sub. Any thoughts?
__________________
2010 135i Champagne Silver
Appreciate 0
      12-12-2014, 11:05 AM   #98
d33p
New Member
1
Rep
12
Posts

Drives: E82 118D
Join Date: Nov 2014
Location: Norway

iTrader: (0)



I'm about the wire up my PP82DSP. Could someone confirm that the speaker outputs is the yellowbox in the middle and the line inputs are the red box to the left?

And I don't need to use the power cables (green on the right) on the system connector when I use the bigger power terminals on the other side right? The amp will sense the signal on the inputs and turn on it self?
Appreciate 0
      12-15-2014, 07:31 AM   #99
d33p
New Member
1
Rep
12
Posts

Drives: E82 118D
Join Date: Nov 2014
Location: Norway

iTrader: (0)

Nevermind, Got it fitted now. Everythings all good
Appreciate 0
      12-17-2014, 10:25 AM   #100
birdcatcher
Private First Class
United_States
12
Rep
106
Posts

Drives: '13 X5 35ixDrive E70
Join Date: Jul 2014
Location: NVA

iTrader: (0)

Quote:
Originally Posted by d33p View Post
Nevermind, Got it fitted now. Everythings all good

What audio system did you start with?
How does it sound with the PP82DSP?
What speakers have you used, after-market or OEM?
How have you used the 8 channels?
Appreciate 0
      12-21-2014, 10:43 AM   #101
d33p
New Member
1
Rep
12
Posts

Drives: E82 118D
Join Date: Nov 2014
Location: Norway

iTrader: (0)

Quote:
Originally Posted by birdcatcher View Post

What audio system did you start with?
How does it sound with the PP82DSP?
What speakers have you used, after-market or OEM?
How have you used the 8 channels?
I have the Navi Business CIC with base stereo coded to Hifi. Fitted the Gladen One 201 Extreme speakers. Only using 4 channels. (2 for front door speakers and 2 for underseat). The rear speakers are stock. I picked the PP82DSP mainly because of its size (compared to MOSCONI 120.4 which is a lot bigger) and level input trigger which I dont think the mosconi have (i think it requires remote port trigger).

It sounds great! A totally different world than the stock. Altought I haven't tweaked the DSP finished yet. Using a behringer ecm 8000 calibration microphone with room eq wizard. Need to find an easier realtime spectrum analyzer software on my mac.
Appreciate 0
      04-05-2015, 01:48 PM   #102
eric2287
Registered
United_States
0
Rep
1
Posts

Drives: 2011 e70
Join Date: Apr 2015
Location: NY

iTrader: (0)

I'm contemplating on getting he PP82DSP, I have base audio with with no tweeters and no amp, my HU is CIC on a 2011 X5 E70.

I want to have individual channels for the tweeters. I don't know if there is a way to tap the individual tweeter output channel with the PP-AC13A harness. Does Technic's harness have a way to provide 6 channels of audio output (sub, mid, tweeters) ?

I assume that the inputs would be from under the seats with Technic's harness , how does this play with the powersave ? Will I be able to control the rear PDC volume and gongs or does the HU harness provide that control
Appreciate 0
      05-11-2015, 03:40 PM   #103
jsalerni
New Member
2
Rep
5
Posts

Drives: 2014 328xi Sport
Join Date: May 2015
Location: 06001

iTrader: (0)

Advice on upgrade?

OK...information overload.

Can someone review/recommend for 2014 328xi with HiFi oem stereo?

I ordered Bavsound replacement kit for all mids and tweeters.

I was going to get Helix Match PP 82DSP to replace OEM amp and technic's harness to connect.

I was going to get Earthquake SWS8 subs to replace underseat.

Any suggested changes or will this work pretty well?

Can I hookup the center speaker still with this?

Will bavsound speakers sound good if i use stock wiring and don't split door mids and tweeters back to amp?

Should SWS8 be 2 ohm version?

Which speakers to which channels?

Any other general advice?

I don't really want to deal with a trunk sub..too little space there as it is.

Thanks so much,
John
Appreciate 0
      05-18-2015, 08:36 PM   #104
mlvswoll
New Member
0
Rep
19
Posts

Drives: 08 535i
Join Date: Mar 2013
Location: Louisiana

iTrader: (0)

Guys, I don't want to ask anything that has already been covered, however I am confused with all the setup options. And I have gotten mixed answers thus far. I was told I needed an amp with balanced inputs, then told no. I was also told I needed to account for DSP and then that it wasn't necessary in my setup. I have a 2011 E90 335i with Nav, and Hifi system. No HK, No Logic7 or center channel. I am looking at the Helix match MS4C components for the front door mids and tweeters and the Helix MS8B 8" sub for the factory floor. My plan was to run a 4ch amp with front channels on components and rear on under seat woofers. Can I do this without the need for a DSP? Also, do you have to use an amp with balanced inputs? Or would the Helix MA40X work? My second consideration was the MB Quart 200.3 component set and the NANO NSC475 amp. Thoughts? Thanks in advance.
Appreciate 0
      05-18-2015, 08:59 PM   #105
mathematics
Captain
mathematics's Avatar
United_States
69
Rep
994
Posts

Drives: 08 328i e93 alpine white
Join Date: May 2009
Location: Queens, NY

iTrader: (0)

Quote:
Originally Posted by mlvswoll View Post
Guys, I don't want to ask anything that has already been covered, however I am confused with all the setup options. And I have gotten mixed answers thus far. I was told I needed an amp with balanced inputs, then told no. I was also told I needed to account for DSP and then that it wasn't necessary in my setup. I have a 2011 E90 335i with Nav, and Hifi system. No HK, No Logic7 or center channel. I am looking at the Helix match MS4C components for the front door mids and tweeters and the Helix MS8B 8" sub for the factory floor. My plan was to run a 4ch amp with front channels on components and rear on under seat woofers. Can I do this without the need for a DSP? Also, do you have to use an amp with balanced inputs? Or would the Helix MA40X work? My second consideration was the MB Quart 200.3 component set and the NANO NSC475 amp. Thoughts? Thanks in advance.
is that base audio without tweeters?
__________________
iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
Appreciate 0
      05-19-2015, 12:09 PM   #106
Technic
Lieutenant General
Technic's Avatar
2258
Rep
12,985
Posts

Drives: 2021 i3S, 2024 i4 M50
Join Date: Apr 2005
Location: Florida

iTrader: (18)

HiFi = balanced outputs

Quote:
Originally Posted by mlvswoll View Post
Guys, I don't want to ask anything that has already been covered, however I am confused with all the setup options. And I have gotten mixed answers thus far. I was told I needed an amp with balanced inputs, then told no. I was also told I needed to account for DSP and then that it wasn't necessary in my setup. I have a 2011 E90 335i with Nav, and Hifi system. No HK, No Logic7 or center channel. I am looking at the Helix match MS4C components for the front door mids and tweeters and the Helix MS8B 8" sub for the factory floor. My plan was to run a 4ch amp with front channels on components and rear on under seat woofers. Can I do this without the need for a DSP? Also, do you have to use an amp with balanced inputs? Or would the Helix MA40X work? My second consideration was the MB Quart 200.3 component set and the NANO NSC475 amp. Thoughts? Thanks in advance.
Appreciate 0
      05-19-2015, 05:20 PM   #107
mlvswoll
New Member
0
Rep
19
Posts

Drives: 08 535i
Join Date: Mar 2013
Location: Louisiana

iTrader: (0)

I have the tweeters in the front pods on the doors, I have the 4 in. mids in the front doors, the two under seat bass drivers and the speakers in the rear tray. Mine is a US model so from what I've read the base for us is the Euro spec HIfi. I PM'd Technic on his harness and he suggested the JL600/6 and infomed me of the balanced inputs. While trying to decide on a speaker system I looked at the MB Quart 200.3 and they recommended a MBQuart Nano NSC475 amp which is 2ohm stable and 75x4. No idea if the inputs accept a balanced signal. I also looked at some of the Helix amps and speaker solutions. Crutchfield was the one who told me inputs did not have to be balanced and recommended some JL audio speaker wire to RCA adapters. I trust Technic on this one based on his experience, just wasn't sure what would work other than JL and how many channels you guys were using as the bass driver mid and tweeter are all on one channel and i don't really care about rear fill. Thanks
Appreciate 0
      05-19-2015, 05:44 PM   #108
Technic
Lieutenant General
Technic's Avatar
2258
Rep
12,985
Posts

Drives: 2021 i3S, 2024 i4 M50
Join Date: Apr 2005
Location: Florida

iTrader: (18)

MB Quart suggested amps are for 4ch systems without OEM amps.
Appreciate 0
      07-15-2015, 11:33 PM   #109
CokeMania
New Member
0
Rep
5
Posts

Drives: 2014 X3 xDrive2.8i
Join Date: Apr 2015
Location: Hong Kong

iTrader: (0)

I am ready to install my 82dsp+match 3way speakers, my 14 X3 with based system with no tweeter, and after retrofit 6.5' to 8.8' NBT, should I need to re-code to hi-fi to enjoy the most benefit from the sound upgrade?
Appreciate 0
      07-16-2015, 12:14 AM   #110
ctuna
Lieutenant General
1904
Rep
13,088
Posts

Drives: 325xi 06 wagon MT
Join Date: Jan 2010
Location: Santa Cruz, Ca

iTrader: (0)

CokeMania what system are you starting with?

CokeMania what system are you starting with?
I would think it would give you a greater range of adjustment
than Base system . And I don't see how you could not do it
if you have L7 and don't try install a mobridge DA-2 or 3

Did you buy the BMW tweeter pods for your new system.

Technic mentioned something about this awhile ago I think he is
the authority on it.

So the MBQuart Amps are set up for Head Unit speaker outs?
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:36 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST