[bavpower]

i just ordered 12mm wheel spacers, and now im wondering if they will fit without having to modify the fender. i have 18" beyern wheels offset and standard bmw sport package. has anyone installed these?

[SV Concepts III]

What offset and width are your Beyerns?

[bavpower]

they are 18", 9.5 width, 3" lip and standard bmw offset

[MalM3]

are they 12 each side or 12 over the entire axel?

[bavpower]

12mm each side. when i measured it it seemed to be about 1.5mm from the lip of the fender.

[MalM3]

the inner lip to plastic wheel well comes in about 5 mm , so it may scrape on compresssion..

[bavpower]

so basically it shouldnt hit the wheel well only the plastic inside the wheel well if compressed. worse comes to worse i should be able to bend the inside of the wheel well up. with out having to flare out the wheel well right.

[MalM3]

yeah, if you get the inner arch rolled , then that should take care of it.

no need to flare on such a small adjustment.

[MalM3]

ive got rondel 0204s 18x8.5 with a 235 40 18 profile, and an offset of 37, and 25mm spacers on each side..

the outer edge just scrapes on major dips.

the springs are -30 on the rear with standard dampers

[bavpower]

awesome i just cant wait to get rid off that gap.. looks so bad. and i thought that i went overkill with the 12mm and when i thought about it didnt think it would fit. but thanks everyone for the posts cant wait to install them will post pics when there installed.