['V']

Trying to figure out what I can get away with for my wheels on the rear.

19x10 offset can be between 25 and 30

Thoughts?
I have rolled arches already and off the top of my head will be running a 265 tyre

[AWBimmer]

19x10et 24 is very doable on rear. et30, even more so.
Esp if you have rolled arches. But note, I had a 245/35 tyre. Even a 255/30 will be okay but cannot vouch for 265.

255/30 won't be that much worse off buddy. My style 95 is 10j et24 FYI.

['V']

Cool.
Have to stick with a 265 for now tho, so would like it to fit with this size tyre.
Also to note, I haven't had any camber etc changed so that's also worth adding to the mix to get this to work. Again tho, would like to stick with how it is from standard but adding a little -Ve wouldn't be out of the question - just not loads!

[AWBimmer]

Andy,
Not sure that 265 will fit without camber work. You'll only need it adjusted a tad notch, nothing major. Worth doing IMO.

['V']

Thanks Sam, Def. Something I'll look into and may be what has to be done anyway.
Was running 19x10 et25 on the rear previously which rubbed on hard turns (only on the right tho) and big bumps - that was with SE suspension tho.
If I can get away with sticking with et25 I will (I like the poke) if not I'll up it a little to 30. The extra 5mm will (hopefully) make a difference.
Worst case is I have to ditch my tyres and buy 255 but if I don't have to until I need new ones then perfect.

Need to figure out a better offset for the front too on a 19x8.5

[Digitalize]

Use the website willitfit and work out what spacer you can run on your current wheel setup and add that to the ET.

['V']

Cheers digi I'll have a look

[AWBimmer]

Originally Posted by 'V'

Thanks Sam, Def. Something I'll look into and may be what has to be done anyway.
Was running 19x10 et25 on the rear previously which rubbed on hard turns (only on the right tho) and big bumps - that was with SE suspension tho.
If I can get away with sticking with et25 I will (I like the poke) if not I'll up it a little to 30. The extra 5mm will (hopefully) make a difference.
Worst case is I have to ditch my tyres and buy 255 but if I don't have to until I need new ones then perfect.

Need to figure out a better offset for the front too on a 19x8.5

I want to downsize my tyres so might sell my 255/30/19 Goodyear Assymetric2 Eagle F1, 5/6mm tread.

If of interest dude let me know

['V']

Will do 👍

[JP.Williams]

i have ET24 10J on a 265 30 and you will need alot of camber work yes. it would of been easier to drop a tyre size but i was being stubborn. i still need to finish the final setup on the camber angle but i know its around -3 -3.5 maybe more.

['V']

Ended up going with et30.
Will still need some adjustment on the 265 tyre but I think it'll work without rubbing - time will tell.
Having my coilivers fitted in the next couple of weeks hopefully so I'll report back with any issues.
Fingers crossed it works out perfect! - yeah right!!! Lol!

[gaza01]

Et30 was the better choice imo