[eg9_dc2]

hi

i just fitted a second hand headlight unit to my e92 and noticed abit of condensation on the bottom inside of the lens..is their anything that i can do to help this from going away?

and also fitted a new bumper however i removed the front PDC (parking) sensors as i hardly ever use them (not that they worked in the first place/also new bumper didnt have holes for sensors anyway)

...but now my PDC light comes on and the rear sensors dont work etc...is their anyway i can get around this without having to get the front bumper off again?

[Red_Bean_Bun]

I reckon....No & no ....

[bmiller085]

Originally Posted by eg9_dc2

hi

i just fitted a second hand headlight unit to my e92 and noticed abit of condensation on the bottom inside of the lens..is their anything that i can do to help this from going away?

and also fitted a new bumper however i removed the front PDC (parking) sensors as i hardly ever use them (not that they worked in the first place/also new bumper didnt have holes for sensors anyway)

...but now my PDC light comes on and the rear sensors dont work etc...is their anyway i can get around this without having to get the front bumper off again?

When you removed the parking sensors, did you also remove the PDC module? Either way (whether you did or not), since your car has the front and rear PDC option, your PDC module has connectors for both front and rear sensors and is coded as such. Not sure if coding would change that or if you need a new PDC module entirely for just rear sensors.

[eg9_dc2]

im just gonna re-attach the front sensors i guess and secure them in their somewhere.....they were on before but didnt work for some reason. rear ones worked fine....im hoping connecting them back on will have everything the same as prior to removal...

just need to sort this silly condensation problem now.