Will coding out bulb checks fix hyper flash from replacement LED turn bulbs??

Volasko · 12-04-2012, 10:46 PM

I bought a few bright white LED bulbs to replace my turn signal bulbs. They are not CANBUS bulbs (local supplier didn't have any) but they look amazing. If I code out all the check bulb programs will this stop the hyper flash I get or does only canbus bulbs stop hyper flash?

Thanks in advance!!

07e92 · 12-05-2012, 12:14 AM

code them out, I bought a set and although the seller claimed it is canbus, but still hyper flash on my 07

makkan00 · 12-05-2012, 06:33 AM

It should.

Volasko · 12-05-2012, 08:05 AM

Well the cable is on the way from ebay so only a few days to confirm this!

Thanks for the help gents!

Elliott@DetailAddict · 12-05-2012, 02:33 PM

Turn off cold and warm checks. On top of the hyper flashing, the LEDs will strobe when ignition turns on (cold checks) and after 15 or so minutes of driving (warm checks) which can present a dangerous situation when driving.

Volasko · 12-05-2012, 03:15 PM

Quote:

Originally Posted by Grant@DetailAddict

Turn off cold and warm checks. On top of the hyper flashing, the LEDs will strobe when ignition turns on (cold checks) and after 15 or so minutes of driving (warm checks) which can present a dangerous situation when driving.

It is kinda hard to tell from your comment (the way you said "On top"), but are you saying that disabling cold and warm checks will stop the hyper flashing?

Elliott@DetailAddict · 12-05-2012, 03:20 PM

Sorry yes, it will disable the hyper flashing.
I was saying, in addition to no more hyper flashing, if you turn off the warm and cold checks it will disable all flickering.
Most people don't notice the warm check flickering since it happens while you're driving, but its not a good thing to have happening.

Volasko · 12-05-2012, 03:46 PM

Good to know, I do have a canbus side marker LED that doesn't create any bulb error messages but I have noticed it flashing on startup (cold check) and while driving (warm check). Thanks for clearing this all up guys. Can't wait to start coding myself, this website has soo much good info!

07e92 · 12-05-2012, 03:52 PM

yeah... those so called CANBUS bulbs do not work well in 06/07 model. Best way is to code them out.

12-04-2012, 10:46 PM	#1
Volasko Colonel 704 Rep 2,603 Posts Drives: 06 330i E90, 18 530xe G30 Join Date: Dec 2010 Location: Toronto iTrader: (2) Garage List 2018 BMW 530e M Sport [9.00] 2006 BMW E90 330i [8.28]	Will coding out bulb checks fix hyper flash from replacement LED turn bulbs?? I bought a few bright white LED bulbs to replace my turn signal bulbs. They are not CANBUS bulbs (local supplier didn't have any) but they look amazing. If I code out all the check bulb programs will this stop the hyper flash I get or does only canbus bulbs stop hyper flash? Thanks in advance!!
	Appreciate 0 Tweet Quote

12-05-2012, 12:14 AM	#2
07e92 First Lieutenant 121 Rep 316 Posts Drives: 07 335i Join Date: Jul 2012 Location: N CAL iTrader: (3)	code them out, I bought a set and although the seller claimed it is canbus, but still hyper flash on my 07
	Appreciate 0 Quote

12-05-2012, 06:33 AM	#3
makkan00 Major General 886 Rep 9,097 Posts Drives: F83 and F36 Join Date: Dec 2011 Location: Essex iTrader: (56)	It should. __________________ F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play
	Appreciate 0 Quote

12-05-2012, 08:05 AM	#4
Volasko Colonel 704 Rep 2,603 Posts Drives: 06 330i E90, 18 530xe G30 Join Date: Dec 2010 Location: Toronto iTrader: (2) Garage List 2018 BMW 530e M Sport [9.00] 2006 BMW E90 330i [8.28]	Well the cable is on the way from ebay so only a few days to confirm this! Thanks for the help gents!
	Appreciate 0 Quote

12-05-2012, 02:33 PM	#5
Elliott@DetailAddict Brigadier General 300 Rep 4,444 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	Turn off cold and warm checks. On top of the hyper flashing, the LEDs will strobe when ignition turns on (cold checks) and after 15 or so minutes of driving (warm checks) which can present a dangerous situation when driving.
	Appreciate 0 Quote

12-05-2012, 03:20 PM	#7
Elliott@DetailAddict Brigadier General 300 Rep 4,444 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	Sorry yes, it will disable the hyper flashing. I was saying, in addition to no more hyper flashing, if you turn off the warm and cold checks it will disable all flickering. Most people don't notice the warm check flickering since it happens while you're driving, but its not a good thing to have happening.
	Appreciate 0 Quote

12-05-2012, 03:46 PM	#8
Volasko Colonel 704 Rep 2,603 Posts Drives: 06 330i E90, 18 530xe G30 Join Date: Dec 2010 Location: Toronto iTrader: (2) Garage List 2018 BMW 530e M Sport [9.00] 2006 BMW E90 330i [8.28]	Good to know, I do have a canbus side marker LED that doesn't create any bulb error messages but I have noticed it flashing on startup (cold check) and while driving (warm check). Thanks for clearing this all up guys. Can't wait to start coding myself, this website has soo much good info!
	Appreciate 0 Quote

12-05-2012, 03:52 PM	#9
07e92 First Lieutenant 121 Rep 316 Posts Drives: 07 335i Join Date: Jul 2012 Location: N CAL iTrader: (3)	yeah... those so called CANBUS bulbs do not work well in 06/07 model. Best way is to code them out.
	Appreciate 0 Quote