[kaitan]

Originally Posted by mlfc_335

It did 229.1kw on the day - DCI, Cobb Stage 1, BMW PE.

Hmm i would expect more but i shall know soon.

[Marcs335]

Originally Posted by kaitan

hmmm i thought it would be more.... Hmm I would what would a JB4, with DP, exhaust and DCI on Map 2 will pull??

I pulled 255.4KW atw with 'just' JB4 on MAP2.
Now looking in to Catless downpipes. will update you once that happens.

[kaitan]

Originally Posted by Marcs335

I pulled 255.4KW atw with 'just' JB4 on MAP2.
Now looking in to Catless downpipes. will update you once that happens.

u've got the g5??

[Marcs335]

g5?

[woosh]

Originally Posted by Marcs335

g5?

He means G14 classified.

[Gemballa1980]

ADVAN: (others may know from experience)

Ballpark cost to install a LSD into a 335i? (Bolted diff)

Also, if you have a supplier? If not I can source my own.

Thanks!

[Stuart@BMRAutowerkes]

Originally Posted by Gemballa1980

ADVAN: (others may know from experience)

Ballpark cost to install a LSD into a 335i? (Bolted diff)

Also, if you have a supplier? If not I can source my own.

Thanks!

I think $2k installed for a new Quaife

[Gemballa1980]

Originally Posted by Stuart@BMRAutowerkes

I think $2k installed for a new Quaife

Ahh ok.. Thanks! Now just to confirm exactly what I have. Mine is an 09/07, which is right when the switch between diffs occured!

[DR-JEKL]

Originally Posted by Stuart@BMRAutowerkes

I think $2k installed for a new Quaife

I thought quaifes were more like $2k supplied and $3k fitted?!?

[DR-JEKL]

Originally Posted by Gemballa1980

Ahh ok.. Thanks! Now just to confirm exactly what I have. Mine is an 09/07, which is right when the switch between diffs occured!

I'm pretty certain the welded diffs have a smaller pumpkin (diff housing) and the older <07's have a large pumpkin so this should indicate if you're bolted or welded I believe. (the large bolted pumpkin is best)

[Kiwi Peter]

I see there are a few newbies on the forum, thought I would bump the old post.
Prices are still fairly correct