[E92_N54_416]

i just finished install jb4 with the fsb, car worked. couple of hours later after puting the pump and tank in car wont start. i disconnected everything, jb4 and fsb, checked all the fuses, disconnected the battery and still nothing, all the lights turn on and ignition, but wen i push the cluch the motor doesent even do anything, can someone help me out plz

[MarkD]

Don't you have a warranty? Take it to the dealer!

[Zebra99]

Sounds like a loose connection. Check the power cord which you needed to tap into with the JB4 power.

Funny that you have power but no crank. Ignition connection loose? Just seems like something not connected properly.

[Mike@N54Tuning.com]

Originally Posted by e92_twin

i just finished install jb4 with the fsb, car worked. couple of hours later after puting the pump and tank in car wont start. i disconnected everything, jb4 and fsb, checked all the fuses, disconnected the battery and still nothing, all the lights turn on and ignition, but wen i push the cluch the motor doesent even do anything, can someone help me out plz

Check to make sure all the ECU subconnectors are installed correctly.

Mike

[ELITE_TRAYUNZE]

Try pushing the start button.

[Zebra99]

Originally Posted by ELITE_TRAYUNZE

Try pushing the start button.

Lol dude, not cool....

[ELITE_TRAYUNZE]

Originally Posted by Zebra99

Lol dude, not cool....