[Beemw335]

Still didnt mention what kind of dyno it was..

[eyim1988]

Originally Posted by Beemw335

Still didnt mention what kind of dyno it was..

6 at or mt? and what was your meth mix?

[Pepe_pr]

Its a dynojet, we dyno at this facility since its a low reader, how do we know, we have tested a same car on a 2 day lifespan without making any other mods or tunning on the same gas tank and had a reading 12 to 10 whp less

And why did we used this lowreader dyno?

To get the most accurate numbers posible

How it feels? Insane

I have a race tomorow with a n54 fbo that pushed 425+ or less but his tq numbers were WAY LOWER, to see how does it goes

By the way my car is 6 at, and the tranny hold power very well until the 470+ tq were we saw very very little slip of the tranny, its barly unotisable but the dyno got it

Methmix is close to 100% meth,

[eyim1988]

Originally Posted by Pepe_pr

Its a dynojet, we dyno at this facility since its a low reader, how do we know, we have tested a same car on a 2 day lifespan without making any other mods or tunning on the same gas tank and had a reading 12 to 10 whp less

And why did we used this lowreader dyno?

To get the most accurate numbers posible

How it feels? Insane

I have a race tomorow with a n54 fbo that pushed 425+ or less but his tq numbers were WAY LOWER, to see how does it goes

By the way my car is 6 at, and the tranny hold power very well until the 470+ tq were we saw very very little slip of the tranny, its barly unotisable but the dyno got it

Methmix is close to 100% meth,

nice! I wish you luck vs the n54. I am going to dyno my car very soon too after i put my exhaust on and try to break the non meth record.
so far

procede v5 rev 2.5 (switching to jb4 once i find a buyer for the procede)
bms cp
bms intake
red cyba air scoops

installing on saturday:
dp/custom exhaust.
MAYBE ill order meth again..

[Pepe_pr]

Vishnnu costumer service ( Robert) is good, BUT SHIV might be a very good on N54 but he does not give a @#% about N55, and his attitude with ME when I dyno the car with the vishnnu parts was very disappointing. REASON WHY I REMOVED HIS PARTS.

don't want to start a tuner war!!! Vishnnu parts are great, but for ME BMS are better.

[eyim1988]

i was always BMS too. I installed my parts from him too. I was meth/dp/jb4 stage 2 before i removed all my mods and sold them because of my car repairs. But now i am remodding my car.

[Sam335ix]

So let me get this straight... Running Map 2 with JB4 along DP, Intake, CP and Meth will also get me to 470 torque? lol Looks like I am ordering meth now as well.

[eyim1988]

map 3

[Tony135]

Damn it, now I have to get back on the Dyno to break your record

[Slops]

it is nice to see somebody is making good power, just too bad its not Vishnu with N55 at this point. Maybe in a week or so

[Kalud]

He posted the pic on the other forum, here it is:

[eyim1988]

nice!!

[Pepe_pr]

[papiti]

K-Bron eso esta BRUTAL. AWESOME DUDE!!!
So mine should be a little bit less than yours, DAMN!!

[mrj25]

those are some good numbers for the N55

it's only a matter of time that we will hit the 400 mark...

[Jdub679]

Great #'s!! I knew it was only a matter of time. Just a little bit more patience and faith my N55 brothers.

[Pepe_pr]

Originally Posted by Tony135

Damn it, now I have to get back on the Dyno to break your record

i hope you do, that means we are in the 400whp and 500 tq numbers lol

[Tony135]

What fuel did you use? 93? Any octane booster?

[eyim1988]

Originally Posted by Tony135

What fuel did you use? 93? Any octane booster?

91 and octane booster

[sA x sKy]

Wow..congratulations on the record dude. Making me jealous that I didn't go with RWD..

[theriz]

Originally Posted by Tony135

Damn it, now I have to get back on the Dyno to break your record

+1

what did you dyno at?

[335xiRT1]

What boost you running?