[AviatorBimmerFL]

I've sent to emails to them this week asking for a quote and not one response. Are they still in business? Their website makes it appear like they still are.

If not, any recommendations for getting my headlights customized with LED rings and blacked out?

[Blue E92]

Their website is very out of date and their response time is incredibly slow. I had contact with them in April about getting one headlight done because of an accident but the car ended up getting totaled. So I doubt that they have quit. Expect week or two response time and a wait of a few months to get a booking.

[AviatorBimmerFL]

Originally Posted by Blueee92

Their website is very out of date and their response time is incredibly slow. I had contact with them in April about getting one headlight done because of an accident but the car ended up getting totaled. So I doubt that they have quit. Expect week or two response time and a wait of a few months to get a booking.

Damn, forget about it... Imagine what the response time would be if one had any "issues" with the work done or any "warranty claim", when the response time to even get a quote is weeks.

Thanks for the heads up. I will look somewhere else or perhaps just buy the rings and do the work myself.

Anyone has any good recommendations for LED rings for angel eyes?

[atwal187]

Originally Posted by AviatorBimmerFL

Damn, forget about it... Imagine what the response time would be if one had any "issues" with the work done or any "warranty claim", when the response time to even get a quote is weeks.

Thanks for the heads up. I will look somewhere else or perhaps just buy the rings and do the work myself.

Anyone has any good recommendations for LED rings for angel eyes?

BavGruppe leds , basically has a plug and play kit but u still have to open the headlight. Few of the members say the owner of it is very rude and racist but the product seems ok, just look into it

[AviatorBimmerFL]

Originally Posted by atwal187

BavGruppe leds , basically has a plug and play kit but u still have to open the headlight. Few of the members say the owner of it is very rude and racist but the product seems ok, just look into it

Oh wow, nice! I will definitely check them out. Thanks for the heads up.

[Duck360198]

What a shame! It appeared OSS designs was without question the place to go for headlight modifications. Certainly not a service you want to go the budget route on for sure.

[Blue E92]

Originally Posted by Duck360198

What a shame! It appeared OSS designs was without question the place to go for headlight modifications. Certainly not a service you want to go the budget route on for sure.

Their work was great but they were very busy as a result and quite understaffed. This leads to slow response times and a very full schedule of builds.

[asquared]

Originally Posted by atwal187

BavGruppe leds , basically has a plug and play kit but u still have to open the headlight. Few of the members say the owner of it is very rude and racist but the product seems ok, just look into it

Pretty sure I've read a guy named Tom owns and operates Bavgruppe. The racist a$$hole you are referring to is just a guy who uses their product for his works. Bavgruppe is good quality from what it seems, just pricey. I'm likely gonna get the Umnitza DTM rings when I tackle my E90 lights as I've already talked to them and they answered all my questions promptly.

[Zombie1]

Check these guys out in New York. http://oneightynyc.com/

[BeastMode335i]

Originally Posted by asquared

Pretty sure I've read a guy named Tom owns and operates Bavgruppe. The racist a$$hole you are referring to is just a guy who uses their product for his works. Bavgruppe is good quality from what it seems, just pricey. I'm likely gonna get the Umnitza DTM rings when I tackle my E90 lights as I've already talked to them and they answered all my questions promptly.

Well if "Tom" wants business to do better, he should really get Carbone to stop his racist shit.. And also his threats and all that nonsense.. Smh...

[Duck360198]

Originally Posted by Zombie1

Check these guys out in New York. http://oneightynyc.com/

Yeah, I've heard great things about this group as well!

[atwal187]

[Tim603]

You should check these guys out
http://www.lightwerkz.net/contacts

also oneEighty in NYC as mentioned above
http://oneightynyc.com/

This place sells parts and may do retrofits but not positive
https://www.bavgruppedesign.com/prod...gory=Mod+Parts

[asquared]

Let's be real with all this, you are ultimately paying for labor from these companies. The cost of halos and materials is minimal. LEDs are almost all coming from china. Go look on eBay and you'll see halos exactly like these companies use for under $100. Bavgruppe charges almost $300 for the set, which you can get on eBay or Amazon for like $70 bucks. And their plug and play harness.....get a male H8 connector and hook up the ground and hot wires to it. I'll be doing my E90 LCI lights myself soon and I'm gonna do a build thread. Already bought a practice light and had the lens off within an hour. So if you aren't handy and willing to take the time and effort to do it yourself, then I guess you have no choice but to pay the $1500+ these companies ask for.

[atwal187]

Originally Posted by asquared

Let's be real with all this, you are ultimately paying for labor from these companies. The cost of halos and materials is minimal. LEDs are almost all coming from china. Go look on eBay and you'll see halos exactly like these companies use for under $100. Bavgruppe charges almost $300 for the set, which you can get on eBay or Amazon for like $70 bucks. And their plug and play harness.....get a male H8 connector and hook up the ground and hot wires to it. I'll be doing my E90 LCI lights myself soon and I'm gonna do a build thread. Already bought a practice light and had the lens off within an hour. So if you aren't handy and willing to take the time and effort to do it yourself, then I guess you have no choice but to pay the $1500+ these companies ask for.

I just bought dtm halos and demon eyes as well, hopefully I can share some pics also. Goodluck with the install

[SeanCon]

Reached out to them regarding turn signal malfunction over 3 months ago with no response...

[Maniac0908]

Cant wait for you guys to make a diy. I want to do this. I have a 07 pre lci e90 with adaptive xenon. I heard hardest part is mounting rings. Let me know if you find a good deal on ebay.

Also, does anyone know whqt size rings i need? Thanks.

[asquared]

Originally Posted by Maniac0908

Cant wait for you guys to make a diy. I want to do this. I have a 07 pre lci e90 with adaptive xenon. I heard hardest part is mounting rings. Let me know if you find a good deal on ebay.

Also, does anyone know whqt size rings i need? Thanks.

I am about to order my rings and clear lens. I plan on taking lots of photos and making a build thread. I?m still trying to find info on how to mount the outer ring. If anybody has any insight on that it would be appreciated. I have a practice light I?m gonna try mocking things up to. So if I need to make some sort of bracket for it, I?ll have it ready for when I do my actual lights.

[atwal187]

Originally Posted by asquared

I am about to order my rings and clear lens. I plan on taking lots of photos and making a build thread. I?m still trying to find info on how to mount the outer ring. If anybody has any insight on that it would be appreciated. I have a practice light I?m gonna try mocking things up to. So if I need to make some sort of bracket for it, I?ll have it ready for when I do my actual lights.

In that video I sent , the guy got a Dremel and cut a big line in the little orb lookin thing ( idk what it's called) on the back he ran a thin copper wire and used 2 part epoxy

[atwal187]

As asquared stated there are rings on eBay as well. But the reason why I personally ordered BavGruppe was because I've seen a lot of their products on Instagram and have personally messaged people who have done it, their responses 99% of the time were that they were satisfied. So I guess to me it was more of a sense of security. I've ordered LED's from eBay, guys like IDMJTOY and whatnot , all garbage material.

[asquared]

Originally Posted by atwal187

In that video I sent , the guy got a Dremel and cut a big line in the little orb lookin thing ( idk what it's called) on the back he ran a thin copper wire and used 2 part epoxy

Keep in mind man that the E92 headlight is very different than the E90 LCI light, so just looking at it, I don't know if that method is going to work. On the E90 LCI, the ring sits in front of the projector, not around it like the E92 light.

[atwal187]

Originally Posted by asquared

Keep in mind man that the E92 headlight is very different than the E90 LCI light, so just looking at it, I don't know if that method is going to work. On the E90 LCI, the ring sits in front of the projector, not around it like the E92 light.

I watched a few videos in the past on various brands, i saw one video where the gentleman used this bottom portion of the angel eye and glued the new light to it, so it acted like a bottom mount. Possibly running some thin copper wires through it shouldn't be an issue either. And very true e92 does vary from the e90. [IMG][/IMG]