Quote:
Originally Posted by mariobonc
I drive a 2012 Z4 35is at 35k miles only. Everything on the car is stock. I have the very same issue with you. There's no problem with hard pulls, high revs. However when I slow down, I get the 2A82 along with 3100 code. I replaced the Vanos solenoids (OEM), replaced the oil and the oil filter, checked the oil filter cap. Nothing changed. One other possibility is I may need to replace the cam shafts, but that's quite an expensive solution.
|
If you did all that then it is most likely the camshaft bearing ledge tray. Not the camshafts. Checking the filter valves could be a good idea to although I doubt it will be it if your oil is changed on schedule.
